.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
BN 75-10Z-1391 2,0M
BN 75-10Z-1391 2,0M
Downloads
- with Pre-wired cable
- Protection class IP67
- Non-contact principle
- 1 Reed contakts
- Long life
- 80 mm x 99,5 mm x 55 mm
- Float switch
- Thermoplastic enclosure
- Available with M12 plug-in connector and pre-wired cable
Ordering data
| Product type description |
BN 75-10Z-1391 2,0M |
| Article number (order number) |
101083048 |
| EAN (European Article Number) |
4030661015538 |
| eCl@ss number, version 12.0 |
27-27-43-02 |
| eCl@ss number, version 11.0 |
27-27-01-05 |
| eCl@ss number, version 9.0 |
27-27-01-05 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
General data
| Working principle |
Magnetic drive |
| Housing construction form |
Special construction |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Active area |
Plastic |
| Gross weight |
173 g |
General data - Features
| Number of normally open (NO) |
1 |
Mechanical data
| Actuating element |
Magnet |
| Mechanical lifetime, minimum |
1,000,000,000 Operations |
Mechanical data - Switching distances
| Nominal switching distance Sn |
47 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
| Hysteresis (Switching distance), maximum |
3 mm |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
Pre-wired cable |
| Number of cable wires |
2 |
| Wire cross-section |
0.75 mm2 |
| Wire cross-section |
20 AWG |
Mechanical data - Dimensions
| Length of sensor |
55 mm |
| Width of sensor |
80 mm |
| Height of sensor |
99.5 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +80 °C |
Electrical data
| Switching voltage, maximum |
220 VAC |
| Switching current, maximum |
1 A |
| Switching capacity, maximum |
60 W |
| Switching capacity, maximum |
60 VA |
| Switching principle |
Reed contacts, Non-contact principle |
| Bounce duration, minimum |
0.3 ms |
| Bounce duration, maximum |
0.6 ms |
| Switching element |
Normally open contact (NO) |
Note
| Note (General) |
Depending on how the floater is assembled, either a NO contact or a NC contact is possible. The indicated switching points are applicable for water |
Language filter
Datasheet
EC Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Characteristic curve
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 18/08/2025, 09:20