schmersal_s_icon.png

IFL 10-30-10/01A

Item number: 101154799

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

IFL (1)-(2)(3)-(4)(5)(6)(7)-(8)


(1)
10Switching distance 10 mm
15Switching distance 15 mm

(2)
30Cylinder, thread M30, metal
300Cylinder, thread M30, plastic

(3)
withoutStandard body
MMiniature body
LLong design

(4)
01Opener (NC)
10Normally open contact (NO)
10/01NO contact / NC contact with wiring compartment
111 NO contact / 1 NC contact antivalent

(5)
withoutCable
STMale connector
TConductor with strain relief
DDC 2-wire

(6)
withoutStandard connector version
2Alternative conector version

(7)
Nn-type
Pp-type

(8)
1310Can be used up to +110 C (for alternating current (AC) only)
2130Can be used up to +130 C, without LED switching conditions display
1766Can be used up to +110 C (for p-type or n-type only)
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Design M30

Ordering data

Product type description

IFL 10-30-10/01A

Article number (order number)

101154799

EAN (European Article Number)

4030661174464

eCl@ss number, version 12.0

27-27-40-01

eCl@ss number, version 11.0

27-27-01-01

eCl@ss number, version 9.0

27-27-01-01

ETIM number, version 7.0

EC002714

ETIM number, version 6.0

EC002714

Approvals - Standards

Certificates

CCC

General data

Standards

DIN VDE 0660-208

EN IEC 60947-5-2

Housing construction form

Cylinder, thread

Installation conditions (mechanical)

flush

Housing material

Brass

Housing coating material

nickel-plated

Active area

Plastic

Material of the nuts

Nickel plated brass

Gross weight

145 g

General data - Features

Integral system diagnostics, status

Yes

Mechanical data

Tightening torque of nuts, maximum

30 Nm

Mechanical data - Switching distances

Nominal switching distance Sn

10 mm

Note (switching distance)

All switching distances in accordance EN IEC 60947-5-2

Mechanical data - Connection technique

Length of cable

2 m

Termination

Screw connection

Cable section, maximum

2 x 1.5 mm²

Mechanical data - Dimensions

Diameter of sensor

30 mm

ISO thread of the sensor

M30

width across flats

36 BK

Length of sensor

118 mm

Ambient conditions

Degree of protection

IP65

Ambient temperature

-25 ... +70 °C

Resistance to vibrations

10 … 55 Hz, amplitude 1 mm

Restistance to shock

30 g / 11 ms

Protection class

II

Electrical data

Rated supply frequency, minimum

45 Hz

Rated supply frequency, maximum

65 Hz

Type of voltage range

AC

DC

Operating current, minimum

10 mA

No-load supply current I0, typical

0.3 mA

Operating current

200 mA

Switching element

NO contact or NC contact

Protection circuit integrated

inductive interference protection

Protection against polarity reversal

Switching frequency, approx.

10 Hz

Electrical data - Digital Output

Voltage drop Ud, maximum

4.5 V

Current at Voltage drop Ud

0.2 A

Design of control elements

Two-wire

Status indication

Note (Integral System Diagnostics, status )

yellow LED

Note

Note (General)

An H30 clamp can also be supplied instead of the nuts.

Language filter

Download the latest version of Adobe Reader

Diagram


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 22/07/2025, 08:48