SRB-E-301ST
SRB-E-301ST
- Bornes à vis enfichables avec codage
- STOP 0 Fonction
- commande à 1 oder 2- canal
- Bouton de démarrage / Démarrage automatique
- 1 Contact auxiliaire
- 3 contacts de sécurité
Exemple de commande
Product type description |
SRB-E-301ST |
Article number (order number) |
103007672 |
EAN (European Article Number) |
4030661478470 |
eCl@ss number, version 12.0 |
27-37-18-19 |
eCl@ss number, version 11.0 |
27-37-18-19 |
eCl@ss number, version 9.0 |
27-37-18-19 |
ETIM number, version 7.0 |
EC001449 |
ETIM number, version 6.0 |
EC001449 |
Homologations - Règlementations
Certificates |
cULus CCC |
Caractéristiques globales
Standards |
EN IEC 62061 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 60947-5-3 EN IEC 60947-5-5 EN IEC 61508 EN IEC 60204-1 EN IEC 60947-1 |
Climatic stress |
EN 60068-2-78 |
Housing material |
Plastique, thermoplastique renforcée de fibres de verre, ventilée |
Gross weight |
175 g |
Données générales - Caractéristiques
Electronic Fuse |
Oui |
Wire breakage detection |
Oui |
Cross-circuit detection |
Oui |
Removable Terminals |
Oui |
Start input |
Oui |
Feedback circuit |
Oui |
Automatic reset function |
Oui |
Reset edge detection |
Oui |
Earth connection detection |
Oui |
Integral system diagnostics, status |
Oui |
Integral system diagnostics, error code |
Oui |
Number of auxiliary contacts |
1 |
Number of LEDs |
5 |
Number of normally closed (NC) |
2 |
Number of normally open (NO) |
1 |
Number of Safety contacts, STOP 0 |
3 |
Classification
Standards |
EN ISO 13849-1 EN IEC 62061 EN IEC 61508 |
Stop-Category |
0 |
Classification - Sorties relais
Performance Level, up to |
e |
Category |
4 |
Diagnostic Coverage (DC) Level |
> 94 % |
PFH value |
1,25 x 10⁻⁸ /h |
PFD value |
5,30 x 10⁻⁵ |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 Year(s) |
Common Cause Failure (CCF), minimum |
65 |
Données mécaniques
Mechanical lifetime, minimum |
10.000.000 Operations |
Mounting |
Fixation rapide sur rails DIN standards selon DIN EN 60715 |
Données mécaniques – technique de connexion
Terminal designations |
IEC/EN 60947-1 |
Cable section, minimum |
0,25 mm² |
Cable section, maximum |
2,5 mm² |
Tightening torque of Clips |
0,5 Nm |
Allowed type of cable |
solid single-wire flexible |
Terminal (mechanical) |
bornes à vis détachables |
Données mécaniques - Dimensions
Width |
22,5 mm |
Height |
98 mm |
Depth |
115 mm |
Conditions ambiantes
Degree of protection of the enclosure |
IP40 |
Degree of protection of the installation space |
IP54 |
Degree of protection of clips or terminals |
IP20 |
Ambient temperature |
-25 ... +60 °C |
Storage and transport temperature |
-40 ... +85 °C |
Note (Relative humidity) |
sans condensation |
Resistance to vibrations |
10 ... 55 Hz, amplitude 0,35 mm |
Restistance to shock |
30 g / 11 ms |
Conditions ambiantes - Valeur d'isolation
Rated impulse withstand voltage Uimp |
4 kV |
Overvoltage category |
III |
Degree of pollution |
2 |
Données électriques
Frequency range |
50 Hz 60 Hz |
Operating voltage |
24 VAC -15 % / +10 % |
Ripple voltage |
10 % |
Rated operating voltage |
24 VAC |
Rated operating voltage |
24 VDC |
Rated AC voltage for controls, 50 Hz, minimum |
20.4 VAC |
Rated control voltage at AC 50 Hz, maximum |
26.4 VAC |
Rated AC voltage for controls, 60 Hz, minimum |
20.4 VAC |
Rated control voltage at AC 60 Hz, maximum |
26.4 VAC |
Rated AC voltage for controls at DC minimum |
20,4 VDC |
Rated control voltage at DC, maximum |
28,8 VDC |
Electrical power consumption |
2,4 W |
Electrical power consumption |
7 VA |
Contact resistance, maximum |
0,1 Ω |
Note (Contact resistance) |
à l'état neuf |
Drop-out delay in case of power failure, typically |
10 ms |
Drop-out delay in case of emergency, typically |
10 ms |
Pull-in delay at automatic start, maximum, typically |
150 ms |
Pull-in delay at RESET, typically |
150 ms |
Switching frequency, maximum |
0,3 Hz |
Material of the contacts, electrical |
Ag-Ni, autonettoyant, à guidage forcé |
Données électriques - Sorties relais de sécurité
Voltage, Utilisation category AC-15 |
230 VAC |
Current, Utilisation category AC-15 |
4 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
4 A |
Switching capacity, minimum |
10 VDC |
Switching capacity, minimum |
10 mA |
Switching capacity, maximum |
250 VAC |
Switching capacity, maximum |
6 A |
Données électriques - Entrées numériques
Conduction resistance, maximum |
40 Ω |
Données électriques - Sorties relais (contacts auxiliaires)
Switching capacity, maximum |
24 VDC |
Switching capacity, maximum |
1 A |
Données électriques - Compatibilité électromagnétique (CEM)
EMC rating |
Directive CEM |
Indication d'état par
Indicated operating states |
Tension de service interne Ui Etat module de sécurité Codes d'erreur |
Données diverses
Note (applications) |
Capteur de sécurité Dispositif de protection protecteur pivotant Bouton d'arrêt d'urgence Interrupteurs de sécurité à commande par câble Rideau lumineux de sécurité Barrières opto-électroniques de sécurité Tapis de sécurité |
Filtre de langue
Fiches techniques
Mode d'emploi et déclaration de conformité
Déclaration de conformité UKCA
Certificat UL
Certification CCC
Brochure
Bibliothèque/Library SISTEMA-VDMA
Télécharger la dernière version d'Adobe Reader
Photo du produit (photo individuelle de catalogue)
UK Declaration of Conformity | ![]() |
Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
Name of the component: | SRB-E-201LC SRB-E-201ST SRB-E-301ST |
Type: | See ordering code |
Description of the component: | Relay safety combination for emergency-stop circuits, safety guard monitoring, magnetic safety switches, safety mats, two-hand controls and AOPDs |
Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
Electromagnetic Compatibility Regulations | 2016 | |
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
Designated standards: | EN ISO 13851:2019 EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 IEC 61508 parts 1-7:2010 |
Notified body, which approved the full quality assurance system, referred to in Appendix X, 2006/42/EC: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein 51105 Köln ID n°: 0035 |
UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
Place and date of issue: | Wuppertal, March 14, 2023 |
![]() |
Authorised signature Philip Schmersal Managing Director |
Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada
Les données et les valeurs ont été soigneusement vérifiées. Les illustrations peuvent être différentes de l'original. Vous trouverez d'avantage de caractéristiques techniques dans les manuels d’instructions. Sous réserve de modifications techniques et errata.
Généré le: 2025-09-25 04 h 15