ZQ 900-02

品番: 131186146

ZQ 900-02

品番: 131186146

Downloads

寸法 CADデータ

eプラン データ

CADENAS CADデータ

SISTEMA データ

合計

Product type description:

ZQ 900-(1)(2)

(1)
11	1 NO contact/1 NC contact
13	1 NO contacts/3 NC contact
22	2 NO contacts/2 NC contact
02	2 NC contact
04	4 NC contact

(2)
without	without emergency-stop button
N	with emergency-stop button

この型式記号に従って組み合わせられる全ての型式が、提供可能あるいは技術的に実現可能ということではありません。

3 cable entries M 20 x 1.5
Metal enclosure
one-side operation / wire up to 75 m long
Release push button
Position indicator
Robust design
Large wiring compartment
Twisting of towing eye not possible
External watertight collar
wire pull and breakage detection

Ordering data

Product type description	ZQ 900-02
Article number (order number)	131186146
EAN (European Article Number)	8905236102080
eCl@ss number, version 12.0	27-37-12-01
eCl@ss number, version 11.0	27-37-12-01
eCl@ss number, version 9.0	27-37-12-01
ETIM number, version 7.0	EC002033
ETIM number, version 6.0	EC002033

Approvals - Standards

Certificates	cULus CCC

General data

Standards	EN ISO 13850 EN IEC 60947-5-1 EN IEC 60947-5-5
Housing material	金属、亜鉛ダイキャスト
Housing coating material	塗装
Material of the housing cover	ガラス繊維、熱可塑性樹脂性
Length of the wire, maximum	75 m
Gross weight	1,400 g

General data - Features

Indicator lamp	No
Number of safety contacts	2

Safety classification

Vorschriften	EN ISO 13849-1
Mission time	20 Year(s)

Safety classification - Safety outputs

B_10D Normally-closed contact (NC)	100,000 Operations

Mechanical data

Mechanical life, minimum	1,000,000 Operations

Mechanical data - Connection technique

Termination	ネジ端子 M20 x 1.5
Cable section, minimum	0.75 mm²
Cable section, maximum	2.5 mm²
Note	All indications including the conductor ferrules.

Mechanical data - Dimensions

Length of sensor	69.7 mm
Width of sensor	71.5 mm
Height of the Sensor, minimum	220.3 mm
Height of the Sensor, maximum	236.3 mm

Ambient conditions

Degree of protection	IP65 IP67
Ambient temperature	-25 ... +70 °C
Relative humidity, maximum	95 %

Ambient conditions - Insulation values

Rated insulation voltage U_i	500 V
Rated impulse withstand voltage U_imp	6 kV

Electrical data

Thermal test current	6 A
Utilisation category AC-15	230 VAC
Utilisation category AC-15	4 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	1 A
Switching element	2 NC接点
Switching principle	スナップアクション
Material of the contacts, electrical	銀

Note

Note (General)	For lengths of over 10 m, intermediate wire supports must be installed every 3 to 5 m. Recommended cable lengths for pull-wire Emergency-Stop switches in relation to the range of ambient temperature. As the thimbles are subject to deformation in case of wire pull, the wire should be pulled several times after fitting. After that, the wire must be re-tensioned using the eyebolt or the tensioner. At 2 m ... 5 m distance intermediate wire supports are required, see accessories The screwed G24-M20 indicator lamp must be ordered separately, see accessories.

Product picture (catalogue individual photo)

ID: kzq90f07

| 557,2 kB | .jpg | 352.778 x 528.814 mm - 1000 x 1499 px - 72 dpi

| 71,4 kB | .png | 73.731 x 110.772 mm - 209 x 314 px - 72 dpi

Dimensional drawing basic component

ID: 1zq-9g02

| 60,2 kB | .cdr |

| 11,7 kB | .png | 74.083 x 51.858 mm - 210 x 147 px - 72 dpi

| 133,9 kB | .jpg | 352.778 x 247.297 mm - 1000 x 701 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact