.png?id=dd4d6d28421d06b6d1d6f7ffec683d49){kind=logo}
BNS 260-02/01ZG-ST-R
BNS 260-02/01ZG-ST-R
| Product type description: BNS 260-(1)(2)Z(3)-(4)-(5) |
| (1) | |
| 11 | 1 NO contacts/1 NC contact |
| 02 | 2 NC contact |
| (2) | |
| without | with diagnostic output |
| /01 | 1 NC contact |
| (3) | |
| without | without LED switching conditions display |
| G | with LED switching conditions display |
| (4) | |
| without | Pre-wired cable |
| ST | with connector |
| (5) | |
| L | Door hinge on left-hand side |
| R | Door hinge on right-hand side |
- Connector 8 mm, 6-pole, Latching interlocking
- Thermoplastic enclosure
- small body
- Concealed mounting possible
- 26 mm x 36 mm x 13 mm
- Long life
- no mechanical wear
- Insensitive to transverse misalignment
- Insensitive to soiling
Ordering data
| Product type description |
BNS 260-02/01ZG-ST-R |
| Article number (order number) |
101184366 |
| EAN (European Article Number) |
4030661321639 |
| eCl@ss number, version 12.0 |
27-27-44-01 |
| eCl@ss number, version 11.0 |
27-27-24-02 |
| eCl@ss number, version 9.0 |
27-27-24-02 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
| Certificates |
TÜV BG cULus |
General data
| Standards |
BG-GS-ET-14 EN IEC 60947-5-3 |
| Coding level according to EN ISO 14119 |
Low |
| Working principle |
Magnetic drive |
| Installation conditions (mechanical) |
quasi-flush |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Gross weight |
18 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Number of normally closed (NC) |
3 |
| Number of safety contacts |
2 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
25,000,000 Operations |
Mechanical data
| Actuating element |
Magnet |
| Door hinge |
Right |
| Direction of motion |
Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Note (Switching distance Sn) |
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
| Assured switching distance "ON" Sao |
5 mm |
| Assured switching distance "OFF" Sar |
15 mm |
Mechanical data - Connection technique
| Termination |
Connector 8 mm, 6-pole, Latching interlocking |
Mechanical data - Dimensions
| Length of sensor |
13 mm |
| Width of sensor |
26 mm |
| Height of sensor |
36 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
75 VDC |
| Rated impulse withstand voltage Uimp |
0.8 kV |
Electrical data
| Required rated short-circuit current |
100 A |
| Switching voltage, maximum |
24 VDC |
| Switching current, maximum |
0.01 A |
| Switching capacity, maximum |
0.24 W |
| Switching frequency, maximum |
5 Hz |
Status indication
| Note (Integral System Diagnostics, status ) |
The LED is illuminated when the guard is closed. |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
BPS 260 |
| Recommended safety switchgear |
SRB-E-301ST SRB-E-201LC |
Note
| Note (General) |
The number in brackets indicate the PIN number of the connector. |
Wiring example
| Note (Wiring diagram) |
The contacts S11-S12 and S21-S22 must be integrated in the safety circuit. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Characteristic curve
Characteristic curve
Contact arrangement
Clipart
101206010 A-K6P-M8-R-G-2M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101206011 A-K6P-M8-R-G-5M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101206012 A-K6P-M8-R-G-10M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101206013 A-K6P-M8-R-W-2M-GY-1-X-A-4
- M8, round 8 mm
- Pre-wired cable
- 6-pole
- Latching interlocking
101206014 A-K6P-M8-R-W-5M-GY-1-X-A-4
- M8, round 8 mm
- Pre-wired cable
- 6-pole
- Latching interlocking
101206015 A-K6P-M8-R-W-10M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101184395 BPS 260-1
- Actuator and sensor on a mounting level
101184396 BPS 260-2
- Actuator 90 ° attached to the sensor
101184643 SPACER BNS 260
- to mount the magnetic safety sensor and actuator on ferromagnetic material
103009970 SRB-E-201LC
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 2 Safety outputs 2 A
- 1 Signalling output
103009973 SRB-E-204ST
- Plug-in screw terminals with coding
- STOP 0 Function
- Monitoring of 4 sensors
- Start button / Auto-start
- 2 Safety outputs
- 4 Signalling outputs
103007672 SRB-E-301ST
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 1 Auxiliary contact
- 3 safety contacts
| EU-Konformitätserklärung |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Erklärung: | Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen. |
| Bezeichnung des Bauteils: | BNS 260 |
| Typ: | siehe Typenschlüssel |
| Beschreibung des Bauteils: | Codierter magnetisch wirkender Sicherheits-Sensor in Verbindung mit den Schmersal Auswerteinheiten SRB(-E) / PROTECT-SELECT / PSC1 oder einer vergleichbaren sicherheitsgerichteten Steuerung, die den Anforderungen der EN 60947-5-3 genügt. |
| Einschlägige Richtlinien: | Maschinenrichtlinie | 2006/42/EG |
| RoHS-Richtlinie | 2011/65/EU |
| Angewandte Normen: | EN 60947-5-3:2013 EN ISO 14119:2013 |
| Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Ort und Datum der Ausstellung: | Wuppertal, 28. Januar 2022 |
 |
| Rechtsverbindliche Unterschrift Philip Schmersal Geschäftsführer |
Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 2024-04-19, 5:35 a.m.