BNS 36 STW-AS-R

Item number: 101194958
BNS 36 STW-AS-R

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BNS 36 (1)-AS-(2)


(1)
withoutConnecting cable (2 m)
STGPre-wired cable with connector plug M12, straight, 4 pole
STWPre-wired cable with connector plug M12, angled, 4 pole

(2)
LDoor hinge on the left-hand side
RDoor hinge on the right-hand side
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • 2 m Pre-wired cable with connector M12, angled, 4-pole
  • Safety sensor
  • Thermoplastic enclosure
  • no mechanical wear
  • 88 mm x 25 mm x 13 mm
  • Integrated AS-Interface
  • Concealed mounting possible
  • Long life
  • Insensitive to transverse misalignment
  • Insensitive to soiling
  • AS-Interface LED and status display

Ordering data

Product type description

BNS 36 STW-AS-R
Article number (order number)

101194958
EAN (European Article Number)

4030661362236
eCl@ss number, version 12.0

27-27-44-01
eCl@ss number, version 11.0

27-27-24-02
eCl@ss number, version 9.0

27-27-24-02
ETIM number, version 7.0

EC002544
ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

TÜV

cULus

ASi-SaW

General data

Standards

EN IEC 62026-2

EN ISO 13849-1

EN IEC 60947-5-3

EN IEC 61508
Coding level according to EN ISO 14119

Low
Working principle

Magnetic drive
Installation conditions (mechanical)

quasi-flush
Housing material

Glass-fibre, reinforced thermoplastic
Reaction time, maximum

100 ms
Gross weight

106 g

General data - Features

Coding

Yes
Integral system diagnostics, status

Yes

Safety classification

Standards

EN ISO 13849-1

EN IEC 61508
Performance Level, up to

e
Category

4
PFH value

1.24 x 10⁻⁸ /h
Note (PFH-value)

up to max. 500,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in

3
Mission time

20 Year(s)

Mechanical data

Actuating element

Magnet
Door hinge

Right
Direction of motion

Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Note (Switching distance Sn)

Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range.
Assured switching distance "ON" Sao

7 mm
Assured switching distance "OFF" Sar

17 mm
Note (Repeat accuracy R)

Wiederholgenauigkeit R ≤ 0,1 x Sao

Mechanical data - Connection technique

Length of cable

2 m
Termination

Pre-wired cable with M12 connector angled, 4-pole
Wire cross-section

0.23 mm2
Wire cross-section

23 AWG
Material of the Cable mantle

LSYY

Mechanical data - Dimensions

Length of sensor

13 mm
Width of sensor

88 mm
Height of sensor

25 mm

Ambient conditions

Degree of protection

IP67
Ambient temperature

-25 ... +60 °C
Storage and transport temperature

-25 ... +70 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g / 11 ms

Ambient conditions - Insulation values

Rated insulation voltage Ui

32 VDC
Rated impulse withstand voltage Uimp

0.8 kV
Overvoltage category

III
Degree of pollution

3

Electrical data - AS Interface

Rated operating voltage

18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum

50 mA

Electrical data - AS-Interface specification

AS-i Specification

Safety-Slave
AS-i Version

V 2.1
AS-i Profile

S-0.B.F.E
AS-i, IO-Code

0x0
AS-i, ID-Code

0xB
AS-i, ID-Code1

0xF
AS-i, ID-Code2

0xE
AS-i Input, Channel 1

Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2

Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3

No Function
AS-i Parameter bits, P0 ... P3

No function
Note (AS-i Parameter bits)

Set the parameter outputs to "1111" (0xF)

AS-i Input module address

0
Note (AS-i Input module address)

Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Status indication

Note (LED switching conditions display)

(1) LED green-red (AS-i Duo LED): Supply voltage / Communication error / Slave address = 0

(2) LED yellow: Enabling status

Pin assignment

PIN 1

AS-i +
PIN 2

n.c.
PIN 3

AS-Interface -
PIN 4

n.c.

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BPS 36-2

Language filter

If a document is not available in the chosen language, the English version will be used by default.

Datasheet

Chinese (04/23/2024)
Danish (04/23/2024)
Dutch (04/23/2024)
English (04/23/2024)
Finnish (04/23/2024)
French (04/23/2024)
German (04/23/2024)
Italian (04/23/2024)
Japanese (04/23/2024)
Norwegian (04/23/2024)
Polish (04/23/2024)
Portugese (04/23/2024)
Portugese (04/23/2024)
Spanish (04/23/2024)
Swedish (04/23/2024)
Turkish (04/23/2024)

Operating instructions and Declaration of conformity

BNS 36 AS (266.0 kB, 05/05/2023)

TÜV certification

BNS 36-AS / BNS 260-AS (791.0 kB, 01/12/2021)
BNS 36-AS / BNS 260-AS (791.0 kB, 01/12/2021)

UL Certificate

BNS 260 / BNS-B20 / BNS 36 / RSS 36 / RSS 260 (413.1 kB, 08/01/2019)

SISTEMA-VDMA library

(109.5 kB, 11/11/2021)

Download the latest version of Adobe Reader

Adobe Reader

Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 2024-04-23, 5:41 p.m.