.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
EX-AZM 161SK-12/12K-3D
EX-AZM 161SK-12/12K-3D
| Product type description: EX-AZM 161 (1)-12/12-(2)K(3)-024-3D |
| (1) | |
| SK | Screw connection |
| CC | Cage clamps |
| (2) | |
| without | Latching force 5 N |
| R | Latching force 30 N |
| (3) | |
| without | Power to unlock |
| A | Power to lock |
- Screw connection
- Ex-Zone 22
- 130 mm x 90 mm x 30 mm
- Clamping force 2000N
- 6 Contacts
- Manual release
- Interlock with protection against incorrect locking.
- cable entries 4 M 16 x 1.5
Ordering data
| Product type description |
EX-AZM 161SK-12/12K-3D |
| Article number (order number) |
103055348 |
| EAN (European Article Number) |
4030661640891 |
Explosion protection
| Explosion protection: regulations |
EN IEC 60079-0 EN 60079-31 |
| Explosion protection zones |
22 |
| Explosion protection category |
3D |
| Explosion protection designation |
D II 3D Ex tc IIIC T80°C Dc X |
General data
| Standards |
EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
| Coding level according to EN ISO 14119 |
Low |
| Working principle |
electromechanical |
| Housing material |
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
General data - Features
| Power to unlock |
Yes |
| Manual release |
Yes |
| Number of actuating directions |
3 |
| Number of auxiliary contacts |
2 |
| Number of safety contacts |
4 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Performance Level, up to |
c |
| Category |
1 |
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
| Note |
Electrical life on request. |
| B10D Normally-open contact (NO) |
1,000,000 Operations |
| Mission time |
20 Year(s) |
| Safety classification - Fault exclusion |
| Please note: |
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to |
d |
| Category |
3 |
| Note |
for 2-channel use and with suitable logic unit. |
| Mission time |
20 Year(s) |
Safety classification - Guard locking function
| Performance Level, up to |
e |
| Note (Performance Level) |
Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions. |
Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Actuating play in direction of actuation |
5.5 mm |
| Impact energy, maximum |
7 J |
| Holding force FZh in accordance with EN ISO 14119 |
2,000 N |
| Holding force Fmax, maximum |
2,600 N |
| Latching force |
5 N |
| Positive break travel |
10 mm |
| Positive break force per NC contact, minimum |
10 N |
| Actuating speed, maximum |
1 m/s |
| Mounting |
Screws |
| Type of the fixing screws |
3x M6 |
| Type of the screw head |
Flat head screw |
| Tightening torque of the fastening screws for the housing cover |
0.6 Nm |
| Note |
The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab. |
| Tightening torque of the cable gland |
3 Nm |
Mechanical data - Connection technique
| Termination |
Screw terminals |
| Cable cross-section of the cable glands, minimum |
5 mm |
| Cable cross-section of the cable glands, maximum |
10 mm |
| Cable section, minimum |
1 x 0.75 mm² |
| Cable section, maximum |
1 x 1.5 mm² |
| Note |
All indications including the conductor ferrules. |
| Allowed type of cable |
solid single-wire solid multi-wire flexible |
Mechanical data - Dimensions
| Length |
30 mm |
| Width |
130 mm |
| Height |
90 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-10 ... +50 °C |
| Note (Relative humidity) |
non-condensing non-icing |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Rated control voltage |
24 VAC |
| Rated control voltage |
24 VDC |
| Required rated short-circuit current |
1,000 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
2.5 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
NO contact, NC contact |
| Switching principle |
slow action, positive break NC contact |
| Maximum switching frequency |
1,000 /h |
| Material of the contacts, electrical |
Silver |
Electrical data - Magnet control
| Magnet switch-on time |
100 % |
| Test pulse duration, maximum |
5 ms |
| Test pulse interval, minimum |
50 ms |
Electrical data - Safety contacts
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
2.5 A |
Electrical data - Auxiliary contacts
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
2.5 A |
Other data
| Note (applications) |
sliding safety guard removable guard hinged safety guard |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Note
| Note (Manual release) |
For maintenance, installation, etc. For manual release using M5 triangular key, available as accessory |
Language filter
Datasheet
Operating instructions and Declaration of conformity
Brochure
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing basic component
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angleDiagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Operating principle
101170375 BETAETIGER AZM 161-B6S
- For very smal actuating radii
101171859 ACTUATOR AZM 161-B1ES
- Straight actuator
- Particularly suitable for sliding doors
101171125 BETAETIGER AZM 161-B1S
- Straight actuator
- Particularly suitable for sliding doors
101174113 AZM 161-B6-2177 WITH CENTERING GUIDE
- For very smal actuating radii
101176642 AZM 161-B1-2177 RETROFIT KIT
- Straight actuator with centering guide
- Particularly suitable for sliding doors
101178199 AZM 161-B1-2024
- Straight actuator with slot lip-seal
- Particularly suitable for sliding doors
101173089 AZM 161-B1-2053 RETROFIT KIT
- Straight actuator
- Particularly suitable for sliding doors
- adjustable ball latch
101144420 ACTUATOR AZM 161-B6
- Flexible actuator
- Particularly suitable for hinged guards
101175431 ACTUATOR AZM 161-B1F
- Straight actuator
- Particularly suitable for sliding doors
101144416 ACTUATOR AZM 161-B1E
- Straight actuator
- Particularly suitable for sliding doors
101145117 ACTUATOR AZM 161-B1
- Straight actuator
- Particularly suitable for sliding doors
101145379 SLOT SEALING PLUG AZM 161
- To cover unused actuator slots
- For protection against the ingress of course dirt
- Simple clip-in fitting
101100887 TK-M5
- For manual release using M5 triangular key, available as accessory
- For maintenance, installation, etc.
| EU-Konformitätserklärung |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Erklärung: | Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen. |
| Bezeichnung des Bauteils: | EX-AZM 161 EX-AZM 161 I |
| Typ: | siehe Typenschlüssel |
| Kennzeichnung: | D II 3D Ex tc IIIC T80°C Dc X |
| Beschreibung des Bauteils: | Verriegelung mit elektromagnetischer Zuhaltung für Sicherheitsfunktionen |
| Einschlägige Richtlinien: | Maschinenrichtlinie | 2006/42/EG |
| EMV-Richtlinie | 2014/30/EU | |
| Explosionsschutzrichtlinie (ATEX) | 2014/34/EU | |
| RoHS-Richtlinie | 2011/65/EU |
| Angewandte Normen: | EN 60947-5-1:2017 + AC:2020 EN ISO 14119:2013 EN IEC 60079-0:2018 EN 60079-31:2014 |
| Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Ort und Datum der Ausstellung: | Wuppertal, 25. September 2023 |
 |
| Rechtsverbindliche Unterschrift Philip Schmersal Geschäftsführer |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | EX-AZM 161 EX-AZM 161 I |
| Type: | See ordering code |
| Marking: | D II 3D Ex tc IIIC T80°C Dc X |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 EN ISO 14119:2013 EN 60079-0:2012 + A11:2013 EN 60079-31:2014 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, April 20, 2021 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 27/11/2024, 21:28