.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
HINGED SAFETY SWITCHES TVS410ST2-11/01UN
HINGED SAFETY SWITCHES TVS410ST2-11/01UN
Downloads
| Product type description: TVS 410 (1)-(2)(3)(4) |
| (1) | |
| SK | Screw connection |
| CC | Cage clamp |
| ST1 | M12 connector bottom |
| ST2 | M12 connector top |
| (2) | |
| 11/11 | 2 NC contacts / 2 NO contacts (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits. Only for ST1, ST2) |
| (3) | |
| U | adjustable switching angle |
| I | Mounting inside (with fixed switching angle 3°) |
| A | Mounting outside (with fixed switching angle 3°) |
| (4) | |
| without | no assembly end stops |
| N | with alignment aid |
- connector plug M12, 8-pole, above
- Metal enclosure
- Good resistance to oil and petroleum spirit
- For left or right hinged doors
- 141 mm x 115 mm x 21,5 mm
- Simple mounting, suitable for all conventional profile systems (30 … 60 mm)
Ordering data
| Note (Delivery capacity) |
Not available! |
| Product type description |
HINGED SAFETY SWITCHES TVS410ST2-11/01UN |
| Article number (order number) |
101184464 |
| eCl@ss number, version 12.0 |
27-27-06-09 |
| eCl@ss number, version 11.0 |
27-27-06-09 |
| eCl@ss number, version 9.0 |
27-27-06-09 |
| ETIM number, version 7.0 |
EC002591 |
| ETIM number, version 6.0 |
EC002591 |
General data
| Housing material |
Metal, zinc die-cast |
| Colour of the housing |
Black |
| Gross weight |
640 g |
General data - Features
| Adjustable switching angle |
Yes |
| Alignment aid |
Yes |
| Number of auxiliary contacts |
2 |
| Number of safety contacts |
2 |
| Safety classification |
| Standards |
BG-GS-ET-15 EN ISO 13849-1 EN IEC 60947-5-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Positive break angle |
5 ° |
| Opening angle |
180° |
Mechanical data - Connection technique
| Termination |
Connector plug M12, 8-pole, top Connector M12 |
Mechanical data - Dimensions
| Length of sensor |
21.5 mm |
| Width of sensor |
141 mm |
| Height of sensor |
115 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-25 ... +65 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
2.5 kV |
Electrical data
| Thermal test current |
2.5 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
4 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
1 A |
| Switching element |
NO contact, NC contact |
| Switching principle |
Slow action |
| Maximum switching frequency |
1,200 /h |
| Material of the contacts, electrical |
Silver-nickel alloy 10 |
Scope of delivery
| Note (scope of delivery, number and type) |
Adjusting tool is included in delivery |
Note
| Note (General) |
Closed guard device = 0° in contact switch travel diagrams. The factory-set switching angle is 3°. Until the limit of the mechanical life has been reached the angle can increase up to 8° under normal wear-out conditions. The positive break angle is 10°. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing basic component
Dimensional drawing basic component
Dimensional drawing actuator
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angle
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 25/11/2024, 13:09