schmersal_s_icon.png

BN 65-10Z

Item number: 101055787
BN 65-10Z

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
  • With pre-wired cable
  • Actuation from side
  • with bias magnet
  • Non-contact principle
  • Long life
  • Actuating surface and direction of actuation marked by switch symbol
  • Construction form Ø 13 mm
  • Thermoplastic enclosure
  • Actuating distance up to 60 mm depending on actuating magnet and version
  • with central mounting
  • Available for actuation from front or side

Ordering data

Product type description

BN 65-10Z
Article number (order number)

101055787
EAN (European Article Number)

4030661009469
eCl@ss number, version 12.0

27-27-43-02
eCl@ss number, version 11.0

27-27-01-05
eCl@ss number, version 9.0

27-27-01-05
ETIM number, version 7.0

EC002544
ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

cULus

General data

Working principle

Magnetic drive
Housing construction form

Cylinder smooth
Housing material

Glass-fibre, reinforced thermoplastic
Gross weight

74 g

General data - Features

Suitable for elevators

Yes
bias magnet

Yes
Cable sleeve

Yes
Number of normally open (NO)

1

Mechanical data

Active area

lateral
Actuating element

Magnet
Mechanical lifetime, minimum

1,000,000,000 Operations
Actuating speed, maximum

18 m/s
Mounting

central with threated flange
Tightening torque of nuts, maximum

3 Nm

Mechanical data - Switching distances

Switching distance Sn

5 mm … 50 mm

BP 10 = 5 mm

2 x BP 10 = 17 mm

BP 15 = 6 mm

2 x BP 15 = 17 mm

2 x BP 15/2 = 17 mm

BP 34 = 15 ... 20 mm

BP 20 = 20 mm

BP 31 = 20 mm

BP 11 = 20 mm

BP 12 = 10 ... 30 mm

BP 21 = 25 ... 50 mm
Note (Switching distance Sn)

Actuating distance up to 50 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Note (switching distance)

All switching distances in accordance EN IEC 60947-5-2
Repeat accuracy R

0.3 mm

Mechanical data - Connection technique

Length of cable

1 m
Cable entry

PG 9 screw connection
Termination

Pre-wired cable
Number of cable wires

2
Wire cross-section

0.75 mm2
Wire cross-section

18 AWG
Material of the Cable mantle

PVC
Cable type

H03VV-F

Mechanical data - Dimensions

Diameter of sensor

13 mm
width across flats

22 BK
Length of sensor

103 mm

Ambient conditions

Degree of protection

IP67
Ambient temperature

-25 ... +75 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g, on sine wave oscillation
Resistant to vibration

30 g, on sine wave oscillation

Electrical data

Switching voltage, maximum

250 VAC
Switching current, maximum

3 A
Switching capacity, maximum

120 W
Switching capacity, maximum

120 VA
Switching principle

Reed contacts, Non-contact principle
Bounce duration, minimum

0.3 ms
Bounce duration, maximum

3 ms
Switching frequency, maximum

300 Hz
Maximale Schalthäufigkeit

1,080,000 /h
Maximum switching time close (NO)

1.5 ms
Maximum switching time open (NC)

0.5 ms
Switching element

Normally open contact (NO)
Minimum switching time close (NO)

0.3 ms
Bounce duration, typically

0.6 ms

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BP 10

2x BP 10

BP 15

2x BP 15

2x BP 15/2

BP 34

BP 20

BP 31

BP 11

BP 12

BP 21
Recommendation (actuator, lift switchgear)

BP 10

2 x BP 15/2

2 x BP 15

2 x BP 10

BP 15

BP 34

Note

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N).

This does not apply to the bistable contact.

Product picture (catalogue individual photo)

kbn65f01

ID: kbn65f01

| 1.4 MB | .jpg | 352.778 x 2554.464 mm - 1000 x 7241 px - 72 dpi

| 324.1 kB | .png | 74.083 x 536.222 mm - 210 x 1520 px - 72 dpi

| 9.5 kB | .jpg | 16.933 x 123.472 mm - 48 x 350 px - 72 dpi

| 8.2 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi

| 18.5 MB | .png | 166.557 x 1206.042 mm - 2000 x 14482 px - 305 dpi

Dimensional drawing basic component

1bn65g03

ID: 1bn65g03

| 25.2 kB | .cdr |

| 7.6 kB | .png | 74.083 x 51.858 mm - 210 x 147 px - 72 dpi

| 81.6 kB | .jpg | 352.778 x 247.297 mm - 1000 x 701 px - 72 dpi

Switch travel diagram

ksbn4sx5

ID: ksbn4sx5

| 17.7 kB | .cdr |

| 1.1 kB | .png | 74.083 x 14.111 mm - 210 x 40 px - 72 dpi

| 16.3 kB | .jpg | 352.778 x 66.675 mm - 1000 x 189 px - 72 dpi

Diagram

1bn65k17

ID: 1bn65k17

| 23.4 kB | .cdr |

| 87.8 kB | .jpg | 352.778 x 243.769 mm - 1000 x 691 px - 72 dpi

| 10.8 kB | .png | 74.083 x 51.153 mm - 210 x 145 px - 72 dpi

Characteristic curve

kbn32d03

ID: kbn32d03

| 3.1 kB | .png | 73.731 x 77.964 mm - 209 x 221 px - 72 dpi

| 116.4 kB | .jpg | 352.425 x 371.828 mm - 999 x 1054 px - 72 dpi

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 12/02/2026, 9:52 am