EX-TV10S 335-02Z-3D

Item number: 101193079


ePLAN Data
Product type description:
EX-TV(1)S 335-(2)Z-(3)-DG

8Shaft bore Ø 8 mm
10Shaft bore Ø 10 mm

022 NC contact
033 NC contact
111 NO contacts/1 NC contact
121 NO contact/2 NC contacts

M20Cable entry M20
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • 1 Cable entry M 20 x 1.5
  • Ex-Zone 22
  • Metal enclosure
  • Actuator shaft can be turned 360°
  • Actuator heads can be repositioned by 4 x 90°
  • 40,5 mm x 107 mm x 65,3 mm
  • Good resistance to oil and petroleum spirit

Ordering data

Product type description

EX-TV10S 335-02Z-3D

Article number (order number)


EAN (European Article Number)


eCl@ss number, version 12.0


eCl@ss number, version 11.0


eCl@ss number, version 9.0


ETIM number, version 7.0


ETIM number, version 6.0


Explosion protection

Explosion protection: regulations

EN IEC 60079-0

EN 60079-31

Explosion protection category


Explosion protection designation

D II 3D Ex tc IIIC T90°C Dc X

General data



EN IEC 60947-5-1

Housing material

Metal, zinc die-cast

Housing coating material


Material of the actuator

Stainless steel

Gross weight

116 g

General data - Features

Safety functions


Number of safety contacts


Safety classification


EN ISO 13849-1

Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

20,000,000 Operations

Mechanical data

Actuating element


Mechanical life, minimum

1,000,000 Operations

Mounting hole for the Shaft

10 mm

Impact energy, maximum

7 J

Positive break travel

10.7 mm

Actuating speed, maximum

1 m/s

Mechanical data - Connection technique


Screw terminals M20 x 1.5

Cable cross-section of the cable glands, minimum

7 mm

Cable cross-section of the cable glands, maximum

12 mm

Cable section, minimum

1 mm²

Cable section, maximum

2.5 mm²

Note (Cable section)

All indications including the conductor ferrules.

Wire cross-section

13 AWG

Mechanical data - Dimensions

Length of sensor

65.3 mm

Width of sensor

40.5 mm

Height of sensor

107 mm

Ambient conditions

Degree of protection


Ambient temperature, maximum (Cable section 1mm2)

+50 °C

Ambient temperature, maximum (Cable section 2.5mm2)

+55 °C

Ambient conditions - Insulation values

Rated insulation voltage Ui

500 V

Rated impulse withstand voltage Uimp

4 kV

Electrical data

Thermal test current

10 A

Utilisation category AC-15

230 VAC

Utilisation category AC-15

4 A

Utilisation category DC-13

24 VDC

Utilisation category DC-13

4 A

Switching element

Opener (NC)

Switching principle

Slow action

Bounce duration, maximum

3 ms

Switching frequency

1,800 /h

Material of the contacts, electrical


Scope of delivery

Scope of delivery

Ex-certified screwed cable gland


Note (General)

By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered.

Adjustment tool: locking screw to fix, shaft pre-drilled to pin

Universal joint available to compensate for axial displacement (only for shaft bore 10 mm)

Language filter

Download the latest version of Adobe Reader

Switch travel diagram


EU Conformity Declaration
EU Declaration of Conformity LOG_COM_lo1de01s

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Internet: www.schmersal.com
Declaration:We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.
Name of the component:EX-TV.S 335
Type:See ordering code
Marking:D II 3D Ex tc IIIC T90°C Dc X
Description of the component:Hinge safety switch
Relevant Directives:Machinery Directive2006/42/EC
 Explosion Protection Directive (ATEX)2014/34/EU
Applied standards:EN 60947-5-1:2017 + AC:2020
EN IEC 60079-0:2018
EN 60079-31:2014
Person authorised for the compilation of the technical documentation:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Place and date of issue:Wuppertal, November 29, 2023
 Authorised signature
Philip Schmersal
Managing Director

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 25/02/2024, 12:00 am