EX-TV10S 335-02Z-3D

Item number: 101193079

EX-TV10S 335-02Z-3D

Item number: 101193079

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:
EX-TV(1)S 335-(2)Z-(3)-DG

(1)
8	Shaft bore Ø 8 mm
10	Shaft bore Ø 10 mm

(2)
02	2 NC contact
03	3 NC contact
11	1 NO contact/1 NC contact
12	1 NO contact/2 NC contacts

(3)
M20	Cable entry M20

Not all component variants, which are possible according to this order code are available and/or technically feasible.

1 Cable entry M 20 x 1.5
Ex-Zone 22
Metal enclosure
Actuator shaft can be turned 360°
Actuator heads can be repositioned by 4 x 90°
40,5 mm x 107 mm x 65,3 mm
Good resistance to oil and petroleum spirit

Ordering data

Product type description	EX-TV10S 335-02Z-3D
Article number (order number)	101193079
EAN (European Article Number)	4030661354750

Approvals - Standards

Certificates

cULus

Explosion protection

Explosion protection: regulations	EN IEC 60079-0 EN IEC 60079-15 EN 60079-31
Explosion protection zones	2 22
Explosion protection category	3G 3D
Explosion protection designation	D II 3G Ex nC IIC T5 Gc X D II 3D Ex tc IIIC T90°C Dc X
Manufacturer declaration	ATEX Zone 2 and 22

General data

Housing construction form	Norm construction design
Actuator type to EN 50041	A
Housing material	Aluminium
Housing coating material	painted
Lever material	Metal film
Gross weight	116 g

General data - Features

Number of safety contacts	2

Safety classification

Standards	EN ISO 13849-1
Mission time	20 Year(s)

Mechanical data

Actuating element	Roller lever
Roller material	Plastic
Mechanical life, minimum	30,000,000 Operations
Mounting hole for the Shaft	10 mm
Impact energy, maximum	4 J
Actuating speed, maximum	2.5 m/s
Note (Actuating speed)	Actuating speed with actuating angle 30° to switch axis

Mechanical data - Connection technique

Termination	Screw terminals M20 x 1.5
Cable cross-section of the cable glands, minimum	7 mm
Cable cross-section of the cable glands, maximum	12 mm
Cable section, minimum	0.75 mm²
Cable section, maximum	2.5 mm²
Note	All indications including the conductor ferrules.
Wire cross-section	13 AWG

Mechanical data - Dimensions

Length of sensor	60.6 mm
Width of sensor	40.5 mm
Height of sensor	134 mm

Ambient conditions

Degree of protection	IP67

Ambient conditions - Insulation values

Rated insulation voltage U_i	500 V
Rated impulse withstand voltage U_imp	6 kV

Electrical data

Thermal test current	10 A
Utilisation category AC-15	230 VAC
Utilisation category AC-15	4 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	4 A
Switching element	2 NC contact
Maximum switching frequency	5,000 /h
Material of the contacts, electrical	Silver

Product picture (catalogue individual photo)

ID: ktv33f01

| 476.9 kB | .jpg | 193.322 x 304.8 mm - 548 x 864 px - 72 dpi

| 75.9 kB | .png | 74.083 x 116.769 mm - 210 x 331 px - 72 dpi

| 68.2 kB | .jpg | 78.317 x 123.472 mm - 222 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1tvs3g01

| 38.8 kB | .cdr |

| 10.4 kB | .png | 74.083 x 51.858 mm - 210 x 147 px - 72 dpi

| 127.2 kB | .jpg | 352.778 x 247.297 mm - 1000 x 701 px - 72 dpi

Switch travel diagram

Information on switch travel diagram
ICO_LEG_sw-close Contact closed
ICO_LEG_sw-open Contact open
ICO_LEG_sw-var Setting range
ICO_LEG_sw-l Latching point
ICO_LEG_sw-p Positive opening path/angle
VS Adjustable range of NO contact
VÖ Adjustable range of NC contact
N After travel

The switching routes shown for the closer and opener contacts can be transferred to other contact combinations.

ID: ktvs3s01

| 1.7 kB | .png | 74.083 x 24.694 mm - 210 x 70 px - 72 dpi

| 52.9 kB | .jpg | 352.778 x 118.181 mm - 1000 x 335 px - 72 dpi

| 55.2 kB | .jpg | 352.778 x 125.236 mm - 1000 x 355 px - 72 dpi

| 3.5 kB | .png | 74.083 x 26.458 mm - 210 x 75 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: k2o--k01

| 48.8 kB | .jpg | 352.778 x 125.236 mm - 1000 x 355 px - 72 dpi

| 2.3 kB | .png | 74.083 x 26.458 mm - 210 x 75 px - 72 dpi

Sample application illustration product

ID: pssp-a19

| 435.4 kB | .cdr |

| 16.6 kB | .png | 74.083 x 57.856 mm - 210 x 164 px - 72 dpi

| 161.7 kB | .jpg | 352.778 x 275.872 mm - 1000 x 782 px - 72 dpi

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

EX-TV.S 335

Type:

See ordering code

Marking:

D II 3D Ex tc IIIC T90°C Dc X

Description of the component:

Hinge safety switch

Relevant Directives:	Machinery Directive	2006/42/EC
	Explosion Protection Directive (ATEX)	2014/34/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-1:2017 + AC:2020
EN IEC 60079-0:2018
EN 60079-31:2014

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, November 29, 2023

Authorised signature
Philip Schmersal
Managing Director

Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 11/30/2024, 6:45 PM

Cart

Login Register now

EX-TV10S 335-02Z-3D