Safety sensors (Archive)

Archive
BNS 16

BNS 16


Go to category
Archive
BNS 30

BNS 30


Go to category
Archive
BNS 33

BNS 33


Go to category
Archive
BNS 36

BNS 36


Go to category
Archive
BNS 120

BNS 120


Go to category
Archive
BNS 250

BNS 250


Go to category
Archive
BNS 303

BNS 303


Go to category
Archive
CSS 16

CSS 16


  • NOTICE: Not available! (Replacement: RSS16)
  • Thermoplastic enclosure
  • Electronic contact-free, coded system
  • Misaligned actuation possible
  • 55 mm x 93 mm x 39.5 mm
  • High repeat accuracy of the switching points
  • Max. length of the sensor chain 200 m
  • Early warning when operating near the limit of the sensor's hysteris range
  • Self-monitoring series-wiring of 16 sensors
  • 2 short-circuit proof PNP safety outputs

Go to category
Archive
CSS 34

CSS 34


  • 1 x Pre-wired cable 8-pole
  • Actuation from top
  • serial diagnostic output
  • Max. 31 sensors can be wired in series.

Go to category
Archive
CSP 34

CSP 34


  • NOTICE: Not available! (Replacement: RSS 36 I)
  • Thermoplastic enclosure
  • Electronic contact-free, coded system
  • Tampering protection by paired coding of sensor and actuator
  • Misaligned actuation possible
  • High repeat accuracy of the switching points
  • Max. length of the sensor chain 200 m
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet

Go to category
Archive
CSS 180

CSS 180


Go to category
Archive
CSS 300

CSS 300


  • Thermoplastic enclosure
  • Max. 31 sensors can be wired in series.
  • Connector M12, 8-pole
  • Ø M30
  • High repeat accuracy of the switching points
  • Max. length of the sensor chain 200 m
  • 2 short-circuit proof PNP safety outputs
  • Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet
  • Safety sensor can also be installed behind V4A covers.

Go to category
Archive
RSS 36

RSS 36


Go to category