IFL 8-180M-10P-1955 6,5M
IFL 8-180M-10P-1955 6,5M
Downloads
| Product type description: IFL (1)-(2)(3)-(4)(5)(6)(7)-(8) |
| (1) | |
| 215 | Switching distance 5 mm |
| 8 | Switching distance 8 mm |
| 10 | Switching distance 10 mm |
| (2) | |
| 18 | Cylinder, thread M18, metal |
| 180 | Cylinder, thread M18, plastic |
| (3) | |
| without | Standard body |
| M | Miniature body |
| L | Long design |
| (4) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (5) | |
| without | Cable |
| ST | Male connector |
| T | Conductor with strain relief |
| A | Alternating current/direct current AC/DC |
| D | DC 2-wire |
| (6) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (7) | |
| N | n-type |
| P | p-type |
| (8) | |
| 2033 | Stainless steel enclosure |
| 2130 | Can be used up to +130 C, without LED switching conditions display |
- Design M 18 x 1
Ordering data
| Product type description |
IFL 8-180M-10P-1955 6,5M |
| Article number (order number) |
101130969 |
| EAN (European Article Number) |
4030661019260 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Plastic |
| Active area |
Plastic |
| Material of the nuts |
Plastic |
| Material of the washer |
Perbunan |
| Gross weight |
254 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Cable sleeve |
No |
| Number of cable wires |
3 |
Mechanical data
| Tightening torque of nuts, maximum |
3 Nm |
Mechanical data - Switching distances
| Nominal switching distance Sn |
8 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
Mechanical data - Connection technique
| Length of cable |
6.5 m |
| Termination |
Cable |
| Wire cross-section |
0.34 mm2 |
| Material of the Cable mantle |
PVC |
Mechanical data - Dimensions
| ISO thread of the sensor |
M18 |
| width across flats |
24 BK |
| Length of sensor |
36 mm |
| Diameter of the Mounting clamp |
M18x1 |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
3.5 mA |
| Operating current |
200 mA |
| Switching element |
Normally open contact (NO) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating |
| Switching frequency, approx. |
400 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
1.2 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Instead of nuts, a mounting clamp can be provided. |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 20/08/2025, 2:02 am