MZM 120 BM ST2-SD2PRE-A

Item number: 101215717

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
Product type description:

MZM 120 (1)ST2-(2)RE-A


(1)
BActuator monitored
BMCombined monitoring of actuator and solenoid interlock

(2)
1P2PW21 diagnostic output and 2 safety outputs, p-type and combined diagnostic signal: guard system closed and interlock locked.
SD2Pserial diagnostic output and 2 p-type safety outputs
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Guard locking monitored
  • connector plug M12, 8-pole
  • Power to lock
  • serial diagnostic output
  • enabling signal, when safety guard closed and locked (without force monitoring)
  • Thermoplastic enclosure
  • Safety switches must be used as end stop
  • 40 mm x 179 mm x 40 mm
  • Electronic contact-free, coded system
  • Variably adjustable latching
  • 3 LEDs to show operating conditions
  • Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
  • Intelligent diagnosis
  • Self-monitoring series-wiring

Ordering data

Note (Delivery capacity)

Not available!

Product type description

MZM 120 BM ST2-SD2PRE-A

Article number (order number)

101215717

EAN (European Article Number)

4030661419343

eCl@ss number, version 12.0

27-27-26-03

eCl@ss number, version 11.0

27-27-26-03

eCl@ss number, version 9.0

27-27-26-03

ETIM number, version 7.0

EC002593

ETIM number, version 6.0

EC002593

Approvals - Standards

Certificates

cULus

General data

Standards

EN ISO 13849-1

EN IEC 60947-5-3

EN IEC 61508

Working principle

inductive

Housing material

Glass-fibre, reinforced thermoplastic

Reaction time, maximum

150 ms

Duration of risk, maximum

150 ms

Gross weight

150 g

General data - Features

Power to lock

Yes

Actuator monitored

Yes

Solenoid interlock monitored

Yes

Serial diagnostics

Yes

Latching

Yes

Short circuit detection

Yes

Cross-circuit detection

Yes

Safety functions

Yes

Integral system diagnostics, status

Yes

Number of safety contacts

2

Safety classification

Standards

EN IEC 60947-5-3

EN IEC 61508

PFH value

4.30 x 10⁻⁹ /h

Mission time

20 Year(s)

Safety classification - Interlocking function

Performance Level, up to

e

Category

4

Safety Integrity Level (SIL), suitable for applications in

3

Mechanical data

Mechanical life, minimum

1,000,000 Operations

Note (Mechanical life)

Operations for door weights ≤ 5 kg

Holding force

500 N

Latching force, minimum

30 N

Latching force, maximum

80 N

Mechanical data - Connection technique

Note (length of the sensor chain)

Cable length and cross-section change the voltage drop dependiing on the output current

Note (series-wiring)

Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD

Termination

Connector plug M12, 8-pole

Mechanical data - Dimensions

Length of sensor

40 mm

Width of sensor

40 mm

Height of sensor

177.5 mm

Ambient conditions

Degree of protection

IP67

IP69K

Ambient temperature

-25 ... +55 °C

Storage and transport temperature, minimum

-25 °C

Storage and transport temperature, maximum

+85 °C

Relative humidity, minimum

30 %

Relative humidity, maximum

95 %

Note (Relative humidity)

non-condensing

non-icing

Resistance to vibrations

10 … 150 Hz, amplitude 0.35 mm

Restistance to shock

30 g / 11 ms

Protection class

II

Ambient conditions - Insulation values

Rated insulation voltage Ui

32 VDC

Rated impulse withstand voltage Uimp

0.8 kV

Overvoltage category

III

Degree of pollution

3

Electrical data

No-load supply current I0, typical

600 mA

Operating current

1,000 mA

Time to readiness, maximum

4,000 ms

Switching frequency, approx.

1 Hz

Electrical data - Magnet control

Switching thresholds

-3 V … 5 V (Low)

15 V … 30 V (High)

Magnet switch-on time

100 %

Electrical data - Safety digital inputs

Switching thresholds

−3 V … 5 V (Low)

15 V … 30 V (High)

Current consumption at 24 V

5 mA

Electrical data - Safety digital outputs

Rated operating current (safety outputs)

250 mA

Voltage drop Ud, maximum

1 V

Leakage current Ir, maximum

0.5 mA

Electrical data - Diagnostic outputs

Voltage drop Ud, maximum

2 V

Electrical data - Serial diagnostic SD

Designation, Serial diagnostic SD

OUT

Operation current

150 mA

Design of control elements

short-circuit proof, p-type

Wiring capacitance

50 nF

Status indication

Note (LED switching conditions display)

Operating condition: LED green

Error / functional defect: LED red

Supply voltage UB available: LED green

Pin assignment

PIN 1

A1 Supply voltage UB

PIN 2

X1 Safety input 1

PIN 3

A2 GND

PIN 4

Y1 Safety output 1

PIN 5

OUT serial diagnostic output

PIN 6

X2 Safety input 2

PIN 7

Y2 Safety output 2

PIN 8

IN serial diagnostic input

PIN 9

without function

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

MZM 120-B1.1

Note

Note (General)

As long as the safety guard remains closed, the unlocked safety guard can be relocked. In this case, the safety outputs are re-enabled, so that the safety guard must not be opened.

Language filter

Operating instructions and Declaration of conformity

SISTEMA-VDMA library

Download the latest version of Adobe Reader

Video ID: SD-Interface-Mr-Safety

ID: SD-Interface-Mr-Safety

| 70.0 MB | .mp4


Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 26/02/2024, 8:52 pm