.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
BN 65-RZ/V 0,170M
BN 65-RZ/V 0,170M
Downloads
- With pre-wired cable
- Actuation from front
- with bias magnet
- Non-contact principle
- Long life
- Actuating surface and direction of actuation marked by switch symbol
- Construction form Ø 13 mm
- Thermoplastic enclosure
- Actuating distance up to 60 mm depending on actuating magnet and version
- with central mounting
- Available for actuation from front or side
Ordering data
| Product type description |
BN 65-RZ/V 0,170M |
| Article number (order number) |
101096431 |
| EAN (European Article Number) |
4030661268477 |
| eCl@ss number, version 12.0 |
27-27-43-02 |
| eCl@ss number, version 11.0 |
27-27-01-05 |
| eCl@ss number, version 9.0 |
27-27-01-05 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
| Certificates |
cULus |
General data
| Working principle |
Magnetic drive |
| Housing construction form |
Cylinder smooth |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Gross weight |
37 g |
General data - Features
| Latching |
Yes |
| Suitable for elevators |
Yes |
| bias magnet |
Yes |
| Cable sleeve |
Yes |
| Number of snap-in contacts |
1 |
Mechanical data
| Active area |
front side |
| Actuating element |
Magnet |
| Mechanical lifetime, minimum |
1,000,000,000 Operations |
| Actuating speed, maximum |
18 m/s |
| Mounting |
central with threated flange |
| Tightening torque of nuts, maximum |
3 Nm |
Mechanical data - Switching distances
| Switching distance Sn |
3 mm … 45 mm 2 x BP 10 = 3 mm BP 34 = 15 mm BP 20 = 10 mm BP 31 = 10 mm BP 11 = 15 mm BP 12 = 20 mm BP 21 = 45 mm BP 22 N + BP 22 S = 35 mm |
| Note (Switching distance Sn) |
Actuating distance up to 45 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
| Repeat accuracy R |
0.3 mm |
Mechanical data - Connection technique
| Length of cable |
0.17 m |
| Cable entry |
PG 9 screw connection |
| Termination |
Pre-wired cable |
| Number of cable wires |
2 |
| Wire cross-section |
0.75 mm2 |
| Wire cross-section |
18 AWG |
| Material of the Cable mantle |
PVC |
| Cable type |
H03VV-F |
Mechanical data - Dimensions
| Diameter of sensor |
13 mm |
| width across flats |
22 BK |
| Length of sensor |
103 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +75 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
15 g, on sine wave oscillation |
| Resistant to vibration |
15 g, on sine wave oscillation |
Electrical data
| Switching voltage, maximum |
230 VAC |
|
| Switching voltage, maximum |
230 VDC |
|
| Switching current, maximum |
1 A |
|
| Switching capacity, maximum |
60 W |
|
| Switching principle |
|
|
| Bounce duration, minimum |
0.3 ms |
|
| Bounce duration, maximum |
3 ms |
|
| Switching frequency, maximum |
300 Hz |
|
| Maximale Schalthäufigkeit |
720,000 /h |
|
| Maximum switching time close (NO) |
1.5 ms |
|
| Maximum switching time open (NC) |
0.5 ms |
|
| Minimum switching time close (NO) |
0.3 ms |
|
| Bounce duration, typically |
0.6 ms |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
2x BP 10 BP 34 BP 20 BP 31 BP 11 BP 12 BP 21 BP 22 S BP 22 N BE 20 |
| Recommendation (actuator, lift switchgear) |
BP 10 2 x BP 10 BP 15 BP 34 |
Note
| Note (General) |
The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm. |
Language filter
Datasheet
EC Declaration of conformity
UL Certificate
Info
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angleSwitch travel diagram
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Characteristic curve
101068881 ACC-IFL-MOCL-H15
- for BN 65
101057531 BP 10
- Unenclosed
- Colour coding of poles by lables
101059923 BP 11 N
- -metal housing
- N-pole marked green
- Suitable for mounting on ferrous material
101057533 BP 11 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101059917 BP 12 N
- -metal housing
- N-pole marked green
- Suitable for mounting on ferrous material
101057532 BP 12 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101057549 BP 20
- -metal housing
- S-pole marked red
- N-pole marked green
- Suitable for mounting on ferrous material with a distance of 20 mm
101057536 BP 21 N
- -metal housing
- N-pole marked green
- Suitable for mounting on ferrous material
101057534 BP 21 S
- -metal housing
- S-pole marked red
- Suitable for mounting on ferrous material
101057530 BP 31
- thermoplastic enclosure
- S-pole marked red
- N-pole marked green
- Suitable for mounting on ferrous material with a distance of 20 mm
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 24/09/2025, 07:04
Recently viewed
PS216-Z11-ST-R210
A-K6P-M8-R-G-5M-GY-1-X-A-4
EX-ZK 235-02Z-3D
MZM 100 B ST-AS REMAP-DU
