BN 75-10Z-1391
BN 75-10Z-1391
Downloads
- with Pre-wired cable
- Non-contact principle
- 1 Reed contakts
- Long life
- 80 mm x 99,5 mm x 55 mm
- Float switch
- Thermoplastic enclosure
- Available with M12 plug-in connector and pre-wired cable
Ordering data
Product type description |
BN 75-10Z-1391 |
Article number (order number) |
101055744 |
EAN (European Article Number) |
4030661009421 |
eCl@ss number, version 12.0 |
27-27-43-02 |
eCl@ss number, version 11.0 |
27-27-01-05 |
eCl@ss number, version 9.0 |
27-27-01-05 |
ETIM number, version 7.0 |
EC002544 |
ETIM number, version 6.0 |
EC002544 |
General data
Working principle |
Magnetic drive |
Housing construction form |
Special construction |
Housing material |
Glass-fibre, reinforced thermoplastic |
Active area |
Plastic |
Gross weight |
122 g |
General data - Features
Number of normally open (NO) |
1 |
Mechanical data
Actuating element |
Magnet |
Mechanical life, minimum |
1,000,000,000 Operations |
Mechanical data - Switching distances according EN IEC 60947-5-3
Hysteresis (Switching distance), maximum |
3 mm |
Mechanical data - Connection technique
Termination |
Pre-wired cable |
Mechanical data - Dimensions
Length of sensor |
55 mm |
Width of sensor |
80 mm |
Height of sensor |
99.5 mm |
Ambient conditions
Degree of protection |
IP67 |
Ambient temperature |
-25 ... +80 °C |
Electrical data
Switching voltage, maximum |
220 VAC |
Switching current, maximum |
1 A |
Switching capacity, maximum |
60 W |
Switching capacity, maximum |
60 VA |
Switching element |
Normally open contact (NO) |
Bounce duration, minimum |
0.3 ms |
Bounce duration, maximum |
0.6 ms |
Electrical data - Digital Output
Design of control elements |
Reed contacts |
Note
Note (General) |
Depending on how the floater is assembled, either a NO contact or a NC contact is possible. The indicated switching points are applicable for water |
Language filter
Datasheet
EC Declaration of conformity
Info
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Characteristic curve
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 22/12/2024, 23:36