BNS 16 ST2-AS D

Item number: 101178189

BNS 16 ST2-AS D

Item number: 101178189

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:

BNS 16(1)-AS (2)

(1)
ST1	Bottom-side connector
ST2	Connector at the right-hand side
ST3	Connector at the left-hand side

(2)
V	Actuation front side
D	Actuation cover-side

Not all component variants, which are possible according to this order code are available and/or technically feasible.

connector plug M12, right, 4-pole
Safety sensor
Thermoplastic enclosure
no mechanical wear
40 mm x 90 mm x 39 mm
Integrated AS-Interface
Concealed mounting possible
Long life
Insensitive to transverse misalignment
Insensitive to soiling
AS-Interface LED and status display

Ordering data

Product type description	BNS 16 ST2-AS D
Article number (order number)	101178189
EAN (European Article Number)	4030661310084
eCl@ss number, version 12.0	27-27-44-01
eCl@ss number, version 11.0	27-27-24-02
eCl@ss number, version 9.0	27-27-24-02
ETIM number, version 7.0	EC002544
ETIM number, version 6.0	EC002544

Approvals - Standards

Certificates

cULus

ASi-SaW

General data

Standards	EN IEC 62026-2 EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508
Working principle	Magnetic drive
Installation conditions (mechanical)	quasi-flush
Housing material	Glass-fibre, reinforced thermoplastic
Reaction time, maximum	100 ms
Gross weight	150 g

General data - Features

Coding	Yes
Integral system diagnostics, status	Yes

Safety classification

Standards	EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	7.42 x 10⁻⁹ /h
Note (PFH-value)	up to max. 500,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Active area	cover-side
Actuating element	Magnet
Direction of motion	Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Assured switching distance "ON" S_ao	8 mm
Assured switching distance "OFF" S_ar	18 mm
Note (Repeat accuracy R)	Wiederholgenauigkeit R ≤ 0,1 x S_ao

Mechanical data - Connection technique

Connector position	Right
Termination	Connector plug M12, 4-pole, (A-coding)

Mechanical data - Dimensions

Length of sensor	38.5 mm
Width of sensor	40 mm
Height of sensor	90 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-25 ... +70 °C
Resistance to vibrations	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data - AS Interface

Rated operating voltage	18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum	50 mA

Electrical data - AS-Interface specification

AS-i Specification	Safety-Slave
AS-i Version	V 2.1
AS-i Profile	S-0.B.F.E
AS-i, IO-Code	0x0
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xE
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3	No Function
AS-i Parameter bits, P0 ... P3	No function
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) FID: periphery error
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Status indication

Note (LED switching conditions display)	(1) LED yellow: Channel 1 / AS-i SaW Bit 0.1 (2) LED green/red (AS-i duo LED): Supply voltage / communication error / slave address = 0 / periphery error detected (3) LED yellow: Channel 2 / AS-i SaW Bit 2.3

Pin assignment

PIN 1	AS-i +
PIN 2	n.c.
PIN 3	AS-Interface -
PIN 4	n.c.

Scope of delivery

Scope of delivery	Actuator must be ordered separately.

Accessory

Recommendation (actuator)	BPS 16

Product picture (catalogue individual photo)

ID: kbns1f08

| 1.0 MB | .jpg | 340.078 x 494.947 mm - 964 x 1403 px - 72 dpi

| 75.7 kB | .png | 74.083 x 107.597 mm - 210 x 305 px - 72 dpi

| 59.2 kB | .jpg | 84.667 x 123.472 mm - 240 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1bn16g01

| 39.1 kB | .cdr |

| 9.4 kB | .png | 74.083 x 51.858 mm - 210 x 147 px - 72 dpi

| 106.3 kB | .jpg | 352.778 x 247.297 mm - 1000 x 701 px - 72 dpi

Dimensional drawing miscellaneous

ID: kbns1a09

| 140.4 kB | .jpg | 352.778 x 352.778 mm - 1000 x 1000 px - 72 dpi

Operating principle

ID: kbns1a06

| 193.4 kB | .jpg | 352.778 x 476.603 mm - 1000 x 1351 px - 72 dpi

| 22.3 kB | .png | 73.731 x 99.836 mm - 209 x 283 px - 72 dpi

Contact arrangement

ID: km12-k4c

| 4.2 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi

| 113.3 kB | .jpg | 352.778 x 352.778 mm - 1000 x 1000 px - 72 dpi

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 20/11/2024, 15:20

Login Register now

BNS 16 ST2-AS D