schmersal_s_icon.png

BNS 40S-12ZG-C 20,0M

Item number: 103009080
BNS 40S-12ZG-C 20,0M

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BNS 40S-12Z(1)-(2)


(1)
withoutwithout LED switching conditions display
Gwith LED switching conditions display

(2)
withoutwith countersunk mounting holes Ø 4.2 mm
Cconcealed threaded holes on the back M4
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • LED version
  • especially easy to clean through concealed threaded holes at the rear
  • Stainless steel enclosure
  • Cable connection suitable for the food industry
  • Concealed mounting possible
  • 88 mm x 27 mm x 14,5 mm
  • Long life
  • no mechanical wear
  • Insensitive to soiling
  • Insensitive to transverse misalignment
  • Suitable for food processing industry

Ordering data

Product type description

BNS 40S-12ZG-C 20,0M
Article number (order number)

103009080
EAN (European Article Number)

4030661457765
eCl@ss number, version 12.0

27-27-44-01
eCl@ss number, version 11.0

27-27-24-02
eCl@ss number, version 9.0

27-27-24-02
ETIM number, version 7.0

EC002544
ETIM number, version 6.0

EC002544

Approvals - Standards

Certificates

cULus

ECOLAB

General data

Standards

BG-GS-ET-14

EN IEC 60947-5-3
Coding level according to EN ISO 14119

Low
Working principle

Magnetic drive
Installation conditions (mechanical)

not flush
Housing material

Stainless steel (V4A)
Gross weight

1,160 g

General data - Features

Coding

Yes
Concealed, threaded holes on the back

Yes
Integral system diagnostics, general

Yes
Prerequisite evaluation unit

Yes
Number of normally closed (NC)

2
Number of normally open (NO)

1
Number of cable wires

6

Safety classification

Standards

EN ISO 13849-1
Mission time

20 Year(s)

Safety classification - Safety outputs

B10D- Value Normally-closed contact/Normally open contact (NC/NO)

25,000,000 Operations

Mechanical data

Actuating element

Magnet
Direction of motion

Head-on to the active surface

Mechanical data - Switching distances according EN IEC 60947-5-3

Assured switching distance "ON" Sao

8 mm
Assured switching distance "OFF" Sar

18 mm

Mechanical data - Connection technique

Length of cable

20 m
Termination

Cable
Wire cross-section

0.25 mm2
Wire cross-section

23 AWG
Material of the Cable mantle

LiYY

Mechanical data - Dimensions

Length of sensor

14.5 mm
Width of sensor

88 mm
Height of sensor

27 mm

Ambient conditions

Degree of protection

IP69
Ambient temperature

-25 ... +80 °C
Storage and transport temperature

-25 ... +80 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g / 11 ms

Electrical data

Switching current, maximum

0.01 A
Switching capacity, maximum

0.24 W
Switching element

1 NO contact, 2 NC contacts
Switching frequency, maximum

5 Hz

Electrical data - Digital Output

Design of control elements

Miscellaneous, Reed contacts

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BPS 40S-2

BPS 40S-1-C

BPS 40S-2-C
Recommended safety switchgear

SRB-E-301ST

SRB-E-201LC

Note

Note (General)

Contact symbols shown for the closed condition of the guard device.

The contact configuration for versions with or without LED is identical.

Wiring example

Note (Wiring diagram)

Contact S21-S22 must be integrated in the safety circuit.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 08/11/2024, 22:28

Recently viewed

LF 50-11 P
LF 50-11 P