.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
IFL 4-6620-10P
IFL 4-6620-10P
Downloads
| Product type description: IFL (1)-(2)-(3)(4)(5)(6) |
| (1) | |
| 0,8 | Switching distance 0.8 mm |
| (2) | |
| 4 | cylinder, smooth, Ø 4 mm |
| (3) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (4) | |
| without | Cable |
| ST | Male connector |
| (5) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (6) | |
| N | n-type |
| P | p-type |
- Design Ø 4 mm
Ordering data
| Product type description |
IFL 4-6620-10P |
| Article number (order number) |
101098561 |
| EAN (European Article Number) |
4030661041391 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
on metal mountable |
| Housing material |
Plastic |
| Active area |
Plastic |
| Material of the terminal fixing |
Plastic |
| Gross weight |
52 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Cable sleeve |
No |
| Number of cable wires |
3 |
Mechanical data - Switching distances
| Nominal switching distance Sn |
4 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
Cable |
| Number of cable wires |
3 |
| Wire cross-section |
0.14 mm2 |
| Material of the Cable mantle |
PVC |
Mechanical data - Dimensions
| Diameter of sensor |
4 mm |
| Length of sensor |
55 mm |
| Width of sensor |
26 mm |
| Height of sensor |
9 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
1.7 mA |
| Operating current |
300 mA |
| Switching element |
Normally open contact (NO) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal Surge protection short-circuit protection (pulsed) |
| Switching frequency, approx. |
700 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
1 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
101103610 ACC-IFL-MOCL-H4
- For a smooth fitting of the proximity switches with cylindric shape Ø 4 mm
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 31/05/2025, 11:21
Recently viewed
SE-AL22-2500 PACKED ALU. RAIL
SLC 210-E/R0310-20-RF
MV8H 330-11Y-A-1366
