MAGNETIC SAFETY SENSORS

Unlike category 2 electromechanical safety switches, safety sensors enable contactless position monitoring of safety doors. This is an advantage for machines that are exposed to high levels of dirt and dust. The sensors are also frequently used in hygiene-sensitive areas, such as the food industry. A basic distinction must be made between electronic and magnetic safety sensors. What both have in common, however, is that they each have a sensor and a target that communicate with each other without contact. The machine can then be put into operation when the sensor detects the target and the safety door and safety circuit are closed.

MAGNETIC SAFETY SENSORS OF THE BNS SERIES

The safety solenoid switches of the BNS-series use the proven principle of safe magnet technology. The switching devices are electromagnetic, non-contact and operate on two channels. As they have two safety contact paths, they are also fail-safe. The sensor can only be actuated with the corresponding target, but not with a conventional magnet, which is due to the combination and arrangement of the reed tubes in the sensor. This ensures a high level of protection against tampering. Despite their compact design, the BNS sensors achieve high switching distances. Concealed mounting is also possible, as the sensor technology works through plastic and even stainless steel covers.

DIFFERENT DESIGNS OF MAGNETIC SAFETY SENSORS IN THE ONLINE CATALOGUE

Schmersal offers the user a wide range of different designs, including sensors with stainless steel housings. All of the Schmersal Group's safety sensors have IP65 degree of protection at a minimum, are dust-tight and protected against water jets from all directions. When used in conjunction with a corresponding safety relay module, they can also achieve Performance Level d or e in accordance with EN ISO 13849-1. In its comprehensive online catalogue, the Schmersal Group provides detailed product information on the individual magnetic safety sensors.