TESF/CC/0

Item number: 101182695

Downloads

ePLAN Data
CADENAS CAD Data
Product type description:

TESF (1)/(2)/(3)/(4)/(5)


(1)
withoutwithout alignment aid
Awith alignment aid

(2)
withoutwith additional hinge
Swithout additional hinge

(3)
withoutScrew connection
CCTension spring connection
ST2424V connector

(4)
.1Bottom-side connector
.2Top-side connector

(5)
0Mounting head-on
180Mounting inside
Usetting by the customer
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • 2 cable entries M 16 x 1.5
  • with fixed switching angle
  • Metal enclosure
  • Good resistance to oil and petroleum spirit
  • For left or right hinged doors
  • 141 mm x 115 mm x 21,5 mm
  • Simple mounting, suitable for all conventional profile systems (30 … 60 mm)

Ordering data

Product type description

TESF/CC/0

Article number (order number)

101182695

EAN (European Article Number)

4030661604718

eCl@ss number, version 12.0

27-27-06-09

eCl@ss number, version 11.0

27-27-06-09

eCl@ss number, version 9.0

27-27-06-09

ETIM number, version 7.0

EC002591

ETIM number, version 6.0

EC002591

Approvals - Standards

Certificates

cULus

CCC

General data

Standards

BG-GS-ET-15

EN IEC 60947-5-1

Housing material

Metal, zinc die-cast

Colour of the housing

Black

Gross weight

840 g

General data - Features

Mounting outside

Yes

Additional hinge

Yes

Number of auxiliary contacts

2

Number of safety contacts

2

Safety classification

Standards

EN ISO 13849-1

Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

2,000,000 Operations

B10D Normally open contact (NO)

1,000,000 Operations

Mechanical data

Mechanical life, minimum

1,000,000 Operations

Positive break angle

10 °

Opening angle

180°

Mechanical data - Connection technique

Termination

2 x Screw terminals M16 x 1.5

Termination

Spring pulley connection

Cable section, minimum

0.5 mm²

Cable section, maximum

1 mm²

Note

All indications including the conductor ferrules.

Mechanical data - Dimensions

Length of sensor

21.5 mm

Width of sensor

141 mm

Height of sensor

115 mm

Ambient conditions

Degree of protection

IP65

Ambient temperature

-25 ... +65 °C

Ambient conditions - Insulation values

Rated insulation voltage Ui

250 VAC

Rated impulse withstand voltage Uimp

2.5 kV

Electrical data

Thermal test current

2.5 A

Utilisation category AC-15

230 VAC

Utilisation category AC-15

2 A

Utilisation category DC-13

24 VDC

Utilisation category DC-13

1 A

Switching element

NO contact, NC contact

Switching principle

Slow action

Maximum switching frequency

1,200 /h

Material of the contacts, electrical

Silver-nickel alloy 10

Scope of delivery

Scope of delivery

Additional hinge

Note

Note (General)

Closed guard device = 0° in contact switch travel diagrams.

The factory-set switching angle is 3°.

Until the limit of the mechanical life has been reached the angle can increase up to 8° under normal wear-out conditions.

The positive break angle is 10°.

Switch travel diagram

Diagram


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 13/07/2024, 23:18