TV10S 355-02Z

Item number: 101117212

TV10S 355-02Z

Item number: 101117212

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:

TV(1)S 355-(2)Z-(3)

(1)
8	Shaft bore Ø 8 mm
10	Shaft bore Ø 10 mm

(2)
02	2 NC contact
03	3 NC contact
11	1 NO contact/1 NC contact
12	1 NO contact/2 NC contacts

(3)
without	Cable entry M20
NPT	Cable entry NPT 1/2"
ST	M12 connector with A-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.)
ST-2310	M12 connector with B-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.)
G24	with LED (only available for version with one NO and one NC contact)

Not all component variants, which are possible according to this order code are available and/or technically feasible.

3 Cable entry M 20 x 1.5
Metal enclosure
Good resistance to oil and petroleum spirit
Actuator heads can be repositioned by 4 x 90°
66,7 mm x 107 mm x 65,3 mm
Actuator shaft can be turned 360°

Ordering data

Product type description	TV10S 355-02Z
Article number (order number)	101117212
EAN (European Article Number)	4030661073453
eCl@ss number, version 12.0	27-27-06-09
eCl@ss number, version 11.0	27-27-06-09
eCl@ss number, version 9.0	27-27-06-09
ETIM number, version 7.0	EC002591
ETIM number, version 6.0	EC002591

Approvals - Standards

Certificates

cULus

CCC

General data

Housing material	Light alloy die-casting
Housing coating material	painted
Gross weight	315 g

General data - Features

Number of safety contacts	2

Safety classification

Standards	BG-GS-ET-15 EN ISO 13849-1 EN IEC 60947-5-1
Mission time	20 Year(s)

Safety classification - Safety outputs

B_10D Normally-closed contact (NC)	20,000,000 Operations

Mechanical data

Actuating element	Other
Mechanical life, minimum	1,000,000 Operations
Positive break angle	7 °
Mounting hole for the Shaft	10 mm
Positive break torque	0.6 Nm

Mechanical data - Connection technique

Termination	Screw terminals M20 x 1.5
Cable section, minimum	0.75 mm²
Cable section, maximum	2.5 mm²
Note	All indications including the conductor ferrules.

Mechanical data - connector side B

Connector typ	Female connector

Mechanical data - Dimensions

Length of sensor	65.3 mm
Width of sensor	66.7 mm
Height of sensor	107 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-25 ... +70 °C

Ambient conditions - Insulation values

Rated insulation voltage U_i	500 V
Rated impulse withstand voltage U_imp	6 kV

Electrical data

Thermal test current	10 A
Utilisation category AC-15	230 VAC
Utilisation category AC-15	4 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	4 A
Switching element	Opener (NC)
Switching principle	Slow action
Maximum switching frequency	1,000 /h
Material of the contacts, electrical	Silver

Note

Note (General)	By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. Adjustment tool: locking screw to fix, shaft pre-drilled to pin Universal joint available to compensate for axial displacement (only for shaft bore 10 mm)

Product picture (catalogue individual photo)

ID: ktv35f01

| 611.0 kB | .jpg | 220.133 x 310.092 mm - 624 x 879 px - 72 dpi

| 75.4 kB | .png | 73.731 x 104.069 mm - 209 x 295 px - 72 dpi

| 78.1 kB | .jpg | 87.489 x 123.472 mm - 248 x 350 px - 72 dpi

Dimensional drawing basic component

ID: ktvs3g03

| 90.7 kB | .cdr |

| 5.7 kB | .png | 74.083 x 88.9 mm - 210 x 252 px - 72 dpi

| 187.0 kB | .jpg | 352.778 x 424.039 mm - 1000 x 1202 px - 72 dpi

Dimensional drawing basic component

ID: 1tvs3g02

| 39.3 kB | .cdr |

| 12.6 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 158.1 kB | .jpg | 352.778 x 245.886 mm - 1000 x 697 px - 72 dpi

Switch travel diagram

Information on switch travel diagram
ICO_LEG_sw-close Contact closed
ICO_LEG_sw-open Contact open
ICO_LEG_sw-var Setting range
ICO_LEG_sw-l Latching point
ICO_LEG_sw-p Positive opening path/angle
VS Adjustable range of NO contact
VÖ Adjustable range of NC contact
N After travel

The switching routes shown for the closer and opener contacts can be transferred to other contact combinations.

ID: ktvs3s01

| 1.7 kB | .png | 74.083 x 24.694 mm - 210 x 70 px - 72 dpi

| 52.9 kB | .jpg | 352.778 x 118.181 mm - 1000 x 335 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: k2o--k01

| 48.8 kB | .jpg | 352.778 x 125.236 mm - 1000 x 355 px - 72 dpi

| 2.3 kB | .png | 74.083 x 26.458 mm - 210 x 75 px - 72 dpi

Sample application illustration product

ID: pssp-a19

| 435.4 kB | .cdr |

| 16.6 kB | .png | 74.083 x 57.856 mm - 210 x 164 px - 72 dpi

| 161.7 kB | .jpg | 352.778 x 275.872 mm - 1000 x 782 px - 72 dpi

UK Conformity Declaration

Pdf

UK Declaration of Conformity

Company:

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.

Name of the component:

TV.S 335, TV.S 355

Type:

See ordering code

Description of the component:

Hinge safety switch

Relevant legislation:	Supply of Machinery (Safety) Regulations	2008
	The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations	2012

Designated standards:

EN 60947-5-1:2017

UK-Importer /
Person authorised for the compilation of the technical documentation:

Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL

Place and date of issue:

Wuppertal, October 6, 2021

Authorised signature
Philip Schmersal
Managing Director

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

TV.S 335,
TV.S 355

Type:

See ordering code

Description of the component:

Hinge safety switch

Relevant Directives:	Machinery Directive	2006/42/EC
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-1:2017

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, August 31, 2021

Authorised signature
Philip Schmersal
Managing Director

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 03/11/2024, 14:21

Login Register now

TV10S 355-02Z