.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
Z4V8H 332-11Y-RMS-1583-2
Item number:
131089851
Z4V8H 332-11Y-RMS-1583-2
Item number:
131089851
Downloads
TraceParts
CAD Data
ePLAN
Data
CADENAS
CAD Data
SISTEMA
Data
| Product type description: Z(1) 332-11Y-(2)-(3) |
| (1) | |
| S | Plunger S |
| R | Roller plunger R |
| H | Roller lever H |
| 10H | Rod lever 10H |
| 7H | Roller lever 7H |
| (2) | |
| without | Cable entry M20 |
| ST | M12 connector with A-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.) |
| 2310 | M12 connector with B-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.) |
| PG13,5 | Cable entry, PG screw fitting 13.5 mm |
| (3) | |
| 2138 | Roller lever 7H for position switches with safety function |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
- Metal enclosure
- Wide range of alternative actuators
- Good resistance to oil and petroleum spirit
- 40 mm x 76 mm x 40 mm
- Actuator heads can be repositioned by 4 x 90°
- 1 Cable entry M 20 x 1.5
- Large contact break
- High repeat accuracy of the switching points
- Gold-plated solid siver contacts
- Magnetic-storage snap action system
- Switching system separated from snap action system, providing constant switching point independent of conatct wear
- Design to EN 50041
- only for positioning tasks
- Lever angle adjustable in 10° steps
Ordering data
| Product type description |
Z4V8H 332-11Y-RMS-1583-2 |
| Article number (order number) |
131089851 |
| EAN (European Article Number) |
8905236106583 |
| eCl@ss number, version 12.0 |
27-27-26-01 |
| eCl@ss number, version 11.0 |
27-27-26-01 |
| eCl@ss number, version 9.0 |
27-27-26-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
|
CCC |
General data
| Standards |
BG-GS-ET-15 EN IEC 60947-5-1 |
| Housing construction form |
Norm construction design |
| Housing material |
Light alloy die-casting |
| Housing coating material |
painted |
| Lever material |
Metal film |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
20,000,000 Operations |
Mechanical data
| Actuating element |
Roller lever |
| Roller material |
Brass |
| Mechanical life, minimum |
30,000,000 Operations |
| Actuating torque, minimum |
0.4 Nm |
Mechanical data - connector side B
| Connector typ |
Female connector |
Mechanical data - Dimensions
| Length of sensor |
57 mm |
| Width of sensor |
40 mm |
| Height of sensor |
173.5 mm |
Ambient conditions
| Degree of protection |
IP65 IP67 |
| Degree of protection of the enclosure |
IP40 |
Ambient conditions - Insulation values
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Required rated short-circuit current |
1,000 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
2.5 A |
| Maximum switching frequency |
3,000 /h |
| Material of the contacts, electrical |
Gold-plated silver (AgNi 15 + Au 0,3µm) |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 26/12/2024, 03:50