.png?id=e5ef4d56dad486103335c34b5b46f1ce){kind=logo}
AZM 161B-ST1-FB-RA
Item number:
103034789
AZM 161B-ST1-FB-RA
Item number:
103034789
| Product type description: AZM161 (1)-(2)-FB-(3)(4)(5) |
| (1) | |
| Z | Solenoid interlock monitored > (Not in power to lock version) |
| B | Actuator monitored |
| (2) | |
| ST1 | connector plug M12, centre |
| ST2 | connector plug M12, right |
| (3) | |
| Latching force 5 N | |
| R | Latching force 30 N |
| (4) | |
| Power to unlock | |
| A | Power to lock |
| (5) | |
| Manual release | |
| N | Emergency release |
| T | Emergency exit |
| TD | Emergency exit on the cover side |
| TU | Emergency exit on the cover side |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
- Device version for connection to a Safety-Field-Box SFB
- connector plug M12, 8-pole
- Thermoplastic enclosure
- Double-insulated
- Interlock with protection against incorrect locking.
- 130 mm x 90 mm x 30 mm
- 6 Contacts
- Long life
Ordering data
| Product type description |
AZM 161B-ST1-FB-RA |
| Article number (order number) |
103034789 |
| EAN (European Article Number) |
4030661541778 |
| eCl@ss number, version 12.0 |
27-27-26-03 |
| eCl@ss number, version 11.0 |
27-27-26-03 |
| eCl@ss number, version 9.0 |
27-27-26-03 |
| ETIM number, version 7.0 |
EC002593 |
| ETIM number, version 6.0 |
EC002593 |
Approvals - Standards
|
IFA cULus |
General data
| Standards |
EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
| Coding level according to EN ISO 14119 |
Low |
| Working principle |
electromechanical |
| Housing material |
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
| Gross weight |
451 g |
General data - Features
| Power to lock |
Yes |
| Manual release |
Yes |
| Number of actuating directions |
3 |
| Number of auxiliary contacts |
1 |
| Number of safety contacts |
2 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Performance Level, up to |
c |
| Category |
1 |
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
| Note |
Electrical life on request. |
| B10D Normally-open contact (NO) |
1,000,000 Operations |
| Note |
at 10% Ie and ohmic load |
| Mission time |
20 Year(s) |
| Safety classification - Fault exclusion |
| Please note: |
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
| Performance Level, up to |
d |
| Category |
3 |
| Note |
for 2-channel use and with suitable logic unit. |
| Mission time |
20 Year(s) |
Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Actuating play in direction of actuation |
5.5 mm |
| Holding force FZh in accordance with EN ISO 14119 |
2,000 N |
| Holding force Fmax, maximum |
2,600 N |
| Latching force |
30 N |
| Positive break travel |
10 mm |
| Positive break force per NC contact, minimum |
10 N |
| Positive break force, minimum |
20 N |
| Actuating speed, maximum |
2 m/s |
| Mounting |
Screws |
| Type of the fixing screws |
3x M6 |
Mechanical data - Connection technique
| Connector position |
Centre |
| Termination |
Connector plug M12, 8-pole, (A-coding) |
Mechanical data - Dimensions
| Length of sensor |
30 mm |
| Width of sensor |
130 mm |
| Height of sensor |
90 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +60 °C |
| Storage and transport temperature |
-25 ... +85 °C |
| Note (Relative humidity) |
non-condensing non-icing |
| Protection class |
II |
| Permissible installation altitude above sea level, maximum |
2,000 m |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
Connector, 8 poles - 60 V |
| Rated impulse withstand voltage Uimp |
0.8 kV |
| Rated impulse withstand voltage, connector 8-pole |
0.8 kV |
Electrical data
| Thermal test current |
2 A |
| Rated control voltage |
24 VAC/DC |
| Required rated short-circuit current |
1,000 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
NO contact, NC contact |
| Switching principle |
slow action, positive break NC contact |
| Maximum switching frequency |
1,000 /h |
| Material of the contacts, electrical |
Silver |
Electrical data - Magnet control
| Magnet switch-on time |
100 % |
| Test pulse duration, maximum |
5 ms |
| Test pulse interval, minimum |
50 ms |
Electrical data - Safety contacts
| Voltage, Utilisation category AC-15 |
24 VAC |
| Current, Utilisation category AC-15 |
2 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
2 A |
Electrical data - Auxiliary contacts
| Voltage, Utilisation category AC-15 |
24 VAC |
| Current, Utilisation category AC-15 |
2 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
2 A |
Other data
| Note (applications) |
sliding safety guard removable guard hinged safety guard |
Pin assignment
| PIN 1 |
A1 Supply voltage UB |
| PIN 2 |
X1 Safety input 1 |
| PIN 3 |
A2 GND |
| PIN 4 |
Y1 Safety output 1 |
| PIN 5 |
Signalling output |
| PIN 6 |
X2 Safety input 2 |
| PIN 7 |
Y2 Safety output 2 |
| PIN 8 |
IN Solenoid control |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Note
| Note (General) |
Interlocks with the power to lock principle may only be used in special cases after a thorough evaluation of the accident risk, since the guarding device can immediately be opened on failure of the electrical power supply or when the main switch is opened. |
| Note (Manual release) |
For maintenance, installation, etc. For manual release using M5 triangular key, available as accessory |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
DGUV-Certificate
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Operating principle
Operating principle
Contact arrangement
Contact arrangement
Actuator
101173089 AZM 161-B1-2053 RETROFIT KIT
- Straight actuator
- Particularly suitable for sliding doors
- adjustable ball latch
101164100 AZM 161-B1-1747 RETROFIT KIT
- Straight actuator with magnetic latch
- Particularly suitable for sliding doors
101178199 AZM 161-B1-2024
- Straight actuator with slot lip-seal
- Particularly suitable for sliding doors
101176642 AZM 161-B1-2177 RETROFIT KIT
- Straight actuator with centering guide
- Particularly suitable for sliding doors
101174113 AZM 161-B6-2177 WITH CENTERING GUIDE
- For very smal actuating radii
101145117 ACTUATOR AZM 161-B1
- Straight actuator
- Particularly suitable for sliding doors
101144416 ACTUATOR AZM 161-B1E
- Straight actuator
- Particularly suitable for sliding doors
101171859 ACTUATOR AZM 161-B1ES
- Straight actuator
- Particularly suitable for sliding doors
101175431 ACTUATOR AZM 161-B1F
- Straight actuator
- Particularly suitable for sliding doors
101171125 BETAETIGER AZM 161-B1S
- Straight actuator
- Particularly suitable for sliding doors
101170375 BETAETIGER AZM 161-B6S
- For very smal actuating radii
101144420 ACTUATOR AZM 161-B6
- Flexible actuator
- Particularly suitable for hinged guards
Accessories
101100887 TK-M5
- For manual release using M5 triangular key, available as accessory
- For maintenance, installation, etc.
Door handle actuator
101175171 AZM 161-STS30-01
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101175178 AZM 161-STS30-02
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101175481 AZM 161-STS30-03
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101175486 AZM 161-STS30-04
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101175490 AZM 161-STS30-05
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101175491 AZM 161-STS30-06
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101173764 AZM 161-STS30-07
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
101173763 AZM 161-STS30-08
- Latching handle
- Suitable for all types of guard
- Max. 110 °C
Connector
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | AZM 161 |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 + AC:2020 EN ISO 14119:2013 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, August 23, 2023 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | AZM 161-FB |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | DIN EN 60947-5-1:2018 EN ISO 14119:2013 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, November 9, 2021 |
| |
| Authorised signature Philip Schmersal Managing Director |
Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 11/17/2024, 5:49 PM