AZM 161SK-12/12RITU-024- B6R

Item number:101215899

Product features

1 Cable entry M 20 x 1.5
Screw connection
Manual release, lateral
Emergency exit, rear
right-hand model
Compact design
For very smal actuating radii in line with or at 90° to the plane of the actuator
Interlock with protection against incorrect locking.
Individual coding
Coding level "High" according to ISO 14119
Double-insulated
High holding force
Long life
130 mm x 90 mm x 30 mm

Please log in to see prices

Ordering data

Product type descriptionAZM 161SK-12/12RITU-024- B6R

Article number (order number)101215899

EAN (European Article Number)4030661405025

eCl@ss number, version 12.027-27-26-03

eCl@ss number, version 11.027-27-26-03

eCl@ss number, version 9.027-27-26-03

ETIM number, version 7.0EC002593

ETIM number, version 6.0EC002593

Approvals - Standards

CertificatesCCCcULusIFA

General data

StandardsEN IEC 60947-5-1EN ISO 13849-1EN ISO 14119

CodingIndividual coding

Coding level according to EN ISO 14119High

Working principleelectromechanical

Housing materialPlastic, glass-fibre reinforced thermoplastic, self-extinguishing

Material of the actuatorStainless steel

Gross weight525g

General data - Features

Emergency exitYes

Manual releaseYes

Number of actuating directions3

Number of auxiliary contacts2

Number of safety contacts4

Safety classification

StandardsEN ISO 13849-1

Performance Level, up toc

Category1

B_10D Normally-closed contact (NC)2,000,000Operations

NoteElectrical life on request.

B_10D Normally-open contact (NO)1,000,000Operations

Noteat 10% I_e and ohmic load

Mission time20Year(s)

Safety classification - Fault exclusion

Please note:Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.

Performance Level, up tod

Category3

Notefor 2-channel use and with suitable logic unit.

Mission time20Year(s)

Safety classification - Guard locking function

Performance Level, up toe

Note (Performance Level)Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.

Mechanical data

Actuating radius, minimum95mm

Mechanical lifetime, minimum1,000,000Operations

Actuating play in direction of actuation5.5mm

Holding force F_Zh in accordance with EN ISO 141192,000N

Holding force F_max, maximum2,600N

Latching force30N

Positive break travel10mm

Positive break force per NC contact, minimum10N

Positive break force, minimum20N

Actuating speed, maximum2m/s

MountingScrews

Type of the fixing screws3x M6

Tightening torque of the fastening screws for the housing cover0.6Nm

NoteThe tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab.

Mechanical data - Connection technique

Cable entry4 x M16 x 1,5

TerminationScrew terminals

Cable section, minimum0.25 mm²

Cable section, maximum1.5 mm²

NoteAll indications including the conductor ferrules.

Allowed type of cableflexiblesolid multi-wiresolid single-wire

Mechanical data - Dimensions

Length of sensor30mm

Width of sensor130mm

Height of sensor90mm

Ambient conditions

IP Degree of protectionIP67

Ambient temperature-25 ... +60 °C

Note (Relative humidity)non-condensingnon-icing

Protection classII

Permissible installation altitude above sea level, maximum2,000m

Ambient conditions - Insulation values

Rated insulation voltage U_i250 VAC

Rated impulse withstand voltage U_imp4kV

Electrical data

Thermal test current6A

Rated control voltage24VAC/DC

Required rated short-circuit current1,000A

Electrical power consumption, maximum10W

Switching elementNO contact, NC contact

Switching principleslow action, positive break NC contact

Maximum switching frequency1,000/h

Material of the contacts, electricalSilver

Electrical data - Magnet control

Magnet switch-on time100%

Test pulse duration, maximum5ms

Test pulse interval, minimum50ms

Electrical data - Safety contacts

Voltage, Utilisation category AC-15230VAC

Current, Utilisation category AC-154A

Voltage, Utilisation category DC-1324VDC

Current, Utilisation category DC-132.5A4A

Electrical data - Auxiliary contacts

Voltage, Utilisation category AC-15230VAC

Current, Utilisation category AC-154A

Voltage, Utilisation category DC-1324VDC

Current, Utilisation category DC-132.5A4A

Other data

Note (applications)hinged safety guardremovable guardsliding safety guard

Scope of delivery

Scope of deliveryNot available as spare partSlot sealing plugsThe actuator is included in the scope of delivery

Note

Note (General)Actuating radius adjustable to minimum 95 mm, using a hexagonal key wrench AF 2.5 mm (a)The actuator is not available separately.The axis of the hinge must be 11 mm above and in a parallel plane to the top surface of the safety switch.

Note (Emergency exit)Emergency exit by pressing the red push buttonResetting by pulling on the red latched buttonThe emergency exit is used where an intervention in an already locked hazardous area is requiredTop-side (ordering suffix -TD) or rear-side (ordering suffix -TU) mounting possible

Note (Manual release)For maintenance, installation, etc.For manual release using M5 triangular key, available as accessory

Note (Emergency exit, Manual release)A combination of manual release and emergency exit in different mounting directions in only possible for the following variants: -ED/-TU and -TD/-EU

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 09/05/2026, 03:39