AST11 L-AS6

Item number: 101176312

AST11 L-AS6

Item number: 101176312

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:

AST (1)(2)-AS(3)(4)

(1)
02	1 NC contact / 1 NC contact
11	1 NO contact / 1 NC contact

(2)
ST	Connector M12
L	Connecting cable (2m)

(3)
2	Connecting cable 2 pole
4	Connecting cable 4 pole
216	Connecting cable 6 pole

(4)
ST	Connector plug M12, Connecting cable 2- and 4-pole (optional)

Not all component variants, which are possible according to this order code are available and/or technically feasible.

Input module with cable (AS-i), length 2 m
For sensors with NC / NO combination
AS-i connection, Pre-wired cable, 4-pole
Sensor connection, Pre-wired cable 2 m
Solenoid supply 24 VDC (Aux)
Magnetic drive through AS-Interface output
NOTICE: Not available!
Input module for 2 safe inputs for mechanical contacts
Thermoplastic enclosure
AS-Interface LED and status display
86,5 mm x 28 mm x 28 mm
Long life
Integrated AS-Interface

Ordering data

Note (Delivery capacity)	Not available!
Product type description	AST11 L-AS6
Article number (order number)	101176312
eCl@ss number, version 12.0	27-24-26-04
eCl@ss number, version 11.0	27-24-26-04
eCl@ss number, version 9.0	27-24-26-04
ETIM number, version 7.0	EC001599
ETIM number, version 6.0	EC001599

Approvals - Standards

Certificates

cULus

General data

Standards	EN 50295 EN ISO 13849-1 EN IEC 60947-5-1 EN IEC 61508
Connector (electric)	AS-i Terminal: Pre-wired cable, 4-pole Sensor connection: pre-wired cable 6-pole
Housing material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

General data - Features

Cross-circuit detection	Yes
Integral system diagnostics, status	Yes
Number of inputs for NC	1
Number of inputs for NO	1
Number of pre-wired cable	2

Safety classification

Standards	EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	2.04 x 10⁻⁹ /h
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data - Connection technique

Length of cable	2 m
Termination	1 NO contacts/1 NC contact
Wire cross-section	0.23 mm²
Wire cross-section	23 AWG

Mechanical data - Dimensions

Diameter of sensor	28 mm
Height of sensor	86.5 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-25 ... +55 °C
Storage and transport temperature	-25 ... +85 °C
Relative humidity, minimum	30 %
Relative humidity, maximum	95 %
Note (Relative humidity)	non-condensing
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

Current consumption	50 mA
Current consumption, maximum	500 mA

Electrical data - AS Interface

Rated operating voltage	26.5 ... 31.6 VDC (Protection against polarity reversal)

Electrical data - AS-Interface specification

AS-i Version	V 2.1
AS-i Profile	S-7.B.F.E
AS-i, IO-Code	0x7
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xE
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0	Solenoid control
AS-i Outputs, DO 1	No Function
AS-i Outputs, DO 2	No Function
AS-i Outputs, DO 3	No Function
AS-i Parameter bits, P0 ... P3	No function
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) FID: periphery error
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Status indication

Note (LED switching conditions display)	(1) LED green: Supply voltage (2) LED red: Communication error (3) LED yellow : Enabling status

Pin assignment

Connection	AS-i connection
PIN 1	Brown (AS interface +)
PIN 2	White - (Aux -)
PIN 3	Blue (AS interface −)
PIN 4	Black - (Aux +)
Connection	Sensor connection
PIN 1	Brown - Normally open contact (NO)
PIN 2	Blue - Normally open contact (NO)
PIN 3	White - Opener (NC)
PIN 4	Black - Opener (NC)
PIN 5	Red - Magnet (+) AUS
PIN 6	Grey - Solenoid GND

Product picture (catalogue individual photo)

ID: kasu-f15

| 477.1 kB | .jpg | 310.444 x 722.489 mm - 880 x 2048 px - 72 dpi

| 44.8 kB | .png | 74.083 x 172.156 mm - 210 x 488 px - 72 dpi

| 15.0 kB | .jpg | 52.917 x 123.472 mm - 150 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1asu-g15

| 22.9 kB | .cdr |

| 2.7 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 62.4 kB | .jpg | 352.778 x 245.181 mm - 1000 x 695 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: kasu-k04

| 15.8 kB | .cdr |

| 49.6 kB | .jpg | 352.778 x 119.239 mm - 1000 x 338 px - 72 dpi

| 2.5 kB | .png | 74.083 x 25.047 mm - 210 x 71 px - 72 dpi

Wiring example

ID: kastal03

| 40.4 kB | .cdr |

| 158.2 kB | .jpg | 352.778 x 686.858 mm - 1000 x 1947 px - 72 dpi

Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 2024-11-26, 6:44 p.m.

Cart

Login Register now

AST11 L-AS6