.png?id=dd4d6d28421d06b6d1d6f7ffec683d49){kind=logo}
IFL 0,8-4-10P
Item number:
101102256
Archive
IFL 0,8-4-10P
Item number:
101102256
Downloads
TraceParts
CAD Data
ePLAN
Data
CADENAS
CAD Data
SISTEMA
Data
| Product type description: IFL (1)-(2)-(3)(4)(5)(6) |
| (1) | |
| 0,8 | Switching distance 0.8 mm |
| (2) | |
| 4 | cylinder, smooth, Ø 4 mm |
| (3) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (4) | |
| without | Cable |
| ST | Male connector |
| (5) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (6) | |
| N | n-type |
| P | p-type |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
- NOTICE: Not available!
- Metal enclosure
- DC 3-wire
- Design Ø 4 mm
Ordering data
| Note (Delivery capacity) |
Not available! |
| Product type description |
IFL 0,8-4-10P |
| Article number (order number) |
101102256 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder smooth |
| Installation conditions (mechanical) |
flush |
| Housing material |
Stainless steel |
| Material of the terminal fixing |
Plastic |
| Gross weight |
35 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Number of cable wires |
3 |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
0.8 mm |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
Cable |
| Wire cross-section |
0.14 mm2 |
| Material of the Cable mantle |
PVC |
Mechanical data - Dimensions
| Diameter of sensor |
4 mm |
| Length of sensor |
27.5 mm |
| Width of sensor |
4 mm |
| Height of sensor |
4 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Protection class |
0 |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
2.5 mA |
| Rated operating voltage |
7 ... 35 VDC |
| Operating current |
100 mA |
| Switching element |
Normally open contact (NO) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal Surge protection short-circuit protection (pulsed) |
| Switching frequency, approx. |
1,000 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
2 V |
| Current at Voltage drop Ud |
0.1 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Scope of delivery
| Note (scope of delivery, number and type) |
Clamp H 4 is included in delivery |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Mouting accessories
101103610 ACC-IFL-MOCL-H4
- For a smooth fitting of the proximity switches with cylindric shape Ø 4 mm
UK Conformity Declaration
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | IFL Design: Ø 4, Ø 6,5, Ø 20, Ø 40, M8, M12, M18, M30, 2.., 3.., 6.., R.. |
| Type: | See ordering code |
| Description of the component: | Inductive proximity switch |
| Relevant legislation: | Electrical Equipment (Safety) Regulations | 2016 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN IEC 60947-5-2:2020 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, January 16, 2023 |
 |
| Authorised signature Philip Schmersal Managing Director |
Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 2024-06-20, 8:01 a.m.