AES 1136

Item number:101170038

Product features

Monitoring of BNS range magnetic safety sensors
1 safety contact, STOP 0
2 Signalling outputs

Please log in to see prices

Ordering data

Note (Delivery capacity)Phased-out product

Product type descriptionAES 1136

Article number (order number)101170038

EAN (European Article Number)4030661296937

eCl@ss number, version 12.027-37-18-19

eCl@ss number, version 11.027-37-18-19

eCl@ss number, version 9.027-37-18-19

ETIM number, version 7.0EC001449

ETIM number, version 6.0EC001449

NoticeDiscontinued product

Approvals - Standards

CertificatescULus

General data

StandardsBG-GS-ET-14BG-GS-ET-20EN IEC 60204-1EN IEC 60947-1EN IEC 60947-5-1EN IEC 60947-5-3EN IEC 60947-5-5EN IEC 62061EN ISO 13849-1

Climatic stressBG-GS-ET-14EN 60068-2-3

Housing materialGlass-fibre reinforced thermoplastic, ventilated

Gross weight155g

General data - Features

Wire breakage detection Yes

Cross-circuit detectionYes

Automatic reset functionYes

Start-up testYes

Earth connection detectionYes

Integral system diagnostics, statusYes

Number of LEDs1

Number of normally closed (NC)2

Number of normally open (NO)1

Number of undelayed semi-conductor outputs with signaling function2

Number of safety contacts1

Number of signalling outputs2

Safety classification

StandardsEN IEC 61508EN ISO 13849-1

Stop-Category0

Safety classification - Relay outputs

Performance Level, up tod

Category3

PFH value1.00 x 10⁻⁷/h

Safety Integrity Level (SIL), suitable for applications in2

Mission time20Year(s)

Mechanical data

Mechanical lifetime, minimum20,000,000Operations

MountingSnaps onto standard DIN rail to EN 60715

Mechanical data - Connection technique

Terminal designationsIEC/EN 60947-1

Cable section, minimum0.25 mm²

Cable section, maximum2.5 mm²

Tightening torque of Clips0.6Nm

Allowed type of cableflexiblesolid single-wire

Terminal (mechanical)Screw terminals

Mechanical data - Dimensions

Width22.5mm

Height100mm

Depth121mm

Ambient conditions

IP Degree of protection of the enclosureIP40

IP Degree of protection of the installation spaceIP54

IP Degree of protection of clips or terminalsIP20

Ambient temperature+0 ... +55 °C

Storage and transport temperature-25 ... +70 °C

Resistance to vibrations10...55 Hz, Amplitude 0.35 mm, ± 15 %

Restistance to shock30 g / 11 ms

Ambient conditions - Insulation values

Rated impulse withstand voltage U_imp4kV

Overvoltage categoryIII

Degree of pollution2

Electrical data

Frequency range50Hz60Hz

Operating voltage24 VAC -15 % / +10 %
24 VDC -15 % / +40 %

Ripple voltage10%

Thermal test current6A

Rated operating voltage24VAC

Rated operating voltage24VDC

Rated AC voltage for controls, 50 Hz, minimum20.4VAC

Rated control voltage at AC 50 Hz, maximum26.4VAC

Rated AC voltage for controls, 60 Hz, minimum20.4VAC

Rated control voltage at AC 60 Hz, maximum26.4VAC

Rated AC voltage for controls at DC minimum20.4VDC

Rated control voltage at DC, maximum28.8VDC

Electrical power consumption5W

Contact resistance, maximum0.1Ω

Note (Contact resistance)in new state

Drop-out delay in case of power failure, typically80ms

Drop-out delay in case of emergency, typically20ms

Pull-in delay at automatic start, maximum, typically100ms

Pull-in delay at RESET, typically20ms

Material of the contacts, electricalAg-Ni 10 and 0.2 µm gold-plated

Electrical data - Safe relay outputs

Voltage, Utilisation category AC-15230VAC

Current, Utilisation category AC-156A

Voltage, Utilisation category DC-1324VDC

Current, Utilisation category DC-136A

Switching capacity, minimum10VDC

Switching capacity, minimum10mA

Switching capacity, maximum250VAC

Switching capacity, maximum8A

Electrical data - Digital inputs

Input signal, HIGH Signal "1"10 … 30 VDC

Input signal, LOW Signal "0"0 … 2 VDC

Conduction resistance, maximum40Ω

Electrical data - Digital Output

Voltage, Utilisation category DC-1224VDC

Current, Utilisation category DC-120.1A

Electrical data - Relay outputs (auxiliary contacts)

Switching capacity, maximum24VDC

Switching capacity, maximum2A

Electrical data - Electromagnetic compatibility (EMC)

EMC ratingEMC-Directive

Integral system diagnosis (ISD)

Note (ISD -Faults)The following faults are registered by the safety monitoring modules and indicated by ISD.

FaultsCross-wire or short-circuit monitoring of the switch connectionsFailure of door contacts to open or closeFailure of the safety relay to pull-in or drop-outFault on the input circuits or the relay control circuits of the safety monitoring moduleInterruption of the switch connections

Other data

Note (applications)Guard systemSafety sensor

Note

Note (General)Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

Wiring example

Note (Wiring diagram)Expansion of enable delay time: The enable delay time can be increased from 0.1 s to 1.0 s by changing the position of a jumper link connection under the cover of the unit.If one or two external relays or contactors are used to switch the load, the system can then only be classified in Category 3 to EN ISO 13849-1, if exclusion of the fault “Failure of the external contactors” can be substantiated and is documented, e.g. byModification for 2 NC contacts: The safety monitoring module can be modified to monitor two NC contacts by bridging the terminals A1 and X1. In this configuration, the short-circuit detection becomes inoperative.Monitoring 1 guard door(s), each with a magnetic safety sensor of the BNS rangeThe ISD tables (Intergral System Diagnostics) for analysis of the fault indications and their causes are shown in the appendix.The wiring diagram is shown with guard doors closed and in de-energised condition.To secure a guard door up to PL d and Category 3

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 07/05/2026, 22:54