.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
BN 85-5-2031
BN 85-5-2031
Downloads
- Enclosure with mounting slots
- Actuation from front
- Non-contact principle
- 5 reed contacts
- Long life
- LED switching conditions display
- connector
- Thermoplastic enclosure
- Reed-contact to clip-in, on-location assembly
Ordering data
| Product type description |
BN 85-5-2031 |
| Article number (order number) |
101118378 |
| EAN (European Article Number) |
4030661050058 |
| eCl@ss number, version 12.0 |
27-27-43-02 |
| eCl@ss number, version 11.0 |
27-27-01-05 |
| eCl@ss number, version 9.0 |
27-27-01-05 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
General data
| Working principle |
Magnetic drive |
| Housing construction form |
rectangular |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Gross weight |
106 g |
General data - Features
| Latching |
Yes |
| Suitable for elevators |
Yes |
| Integral system diagnostics, status |
Yes |
| Number of Snap-in contacts, maximum |
5 |
| Number of Snap-in contacts, minimum |
1 |
Mechanical data
| Actuating panels |
front side |
| Actuating element |
Magnet |
| Mechanical life, minimum |
1,000,000,000 Operations |
| Mounting |
Enclosure with mounting slots |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Switching distance Sn |
1 mm … 14 mm |
| Note (Switching distance Sn) |
The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed. |
Mechanical data - Connection technique
| Termination |
Connector, 10-pole |
Mechanical data - Dimensions
| Length of sensor |
140 mm |
| Width of sensor |
65 mm |
| Height of sensor |
20 mm |
Ambient conditions
| Degree of protection |
IP30 |
| Ambient temperature |
-10 ... +75 °C |
| Restistance to shock |
60 g, on sine wave oscillation |
Electrical data
| Switching voltage, minimum |
12 VDC |
| Switching voltage, maximum |
60 VDC |
| Switching current, maximum |
1 A |
| Switching capacity, maximum |
30 W |
| Switching element |
bistable contact |
Electrical data - Digital Output
| Design of control elements |
Reed contacts |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
BP 7 |
| Recommendation (actuator, lift switchgear) |
BP 7 |
Note
| Note (General) |
The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
EC Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing actuator
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 04/12/2024, 13:08