RSS 36-D-R

Product features

Universal coding with RFID technology
1 x Pre-wired cable 8-pole
Actuation from side
Thermoplastic enclosure
RFID-technology for needs-based protection against tampering
Misaligned actuation possible
27 mm x 108.2 mm x 35 mm
High repeat accuracy of the switching points
2 short-circuit proof PNP safety outputs
Integral cross-short, wire-breakage and external voltage monitoring of the safety cables up to the control cabinet

Ordering data

Note (Delivery capacity)Not available!

Product type descriptionRSS 36-D-R

Article number (order number)101213959

EAN (European Article Number)4030661407944

eCl@ss number, version 12.027-27-46-01

eCl@ss number, version 11.027-27-24-03

eCl@ss number, version 9.027-27-24-03

ETIM number, version 7.0EC001829

ETIM number, version 6.0EC001829

Approvals - Standards

CertificatesANATELcULusECOLABFCCICTÜV

General data

StandardsEN IEC 60947-5-3EN IEC 61508EN ISO 13849-1

CodingUniversal coding

Coding level according to EN ISO 14119Low

Working principleRFID

Frequency band RFID125kHz

Transmitter output RFID, maximum-6dBm

Housing construction formBlock

Installation conditions (mechanical)not flush

Sensor topologySensor for series wiring

Housing materialGlass-fibre, reinforced thermoplastic

Reaction time, maximum100ms

Duration of risk, maximum200ms

Reaction time, switching off safety outputs via actuator, maximum100ms

Reaction time, switching off safety outputs via safety inputs, maximum0.5ms

Gross weight295g

General data - Features

LatchingYes

Diagnostic outputYes

Short circuit detectionYes

Cross-circuit detectionYes

Series-wiringYes

Safety functionsYes

CascadableYes

Integral system diagnostics, statusYes

Number of LEDs3

Number of semi-conductor outputs with signaling function1

Number of fail-safe digital outputs2

Safety classification

StandardsEN IEC 61508EN ISO 13849-1

Performance Level, up toe

Category4

PFH value2.70 x 10⁻¹⁰/h

PFD value2.10 x 10⁻⁵

Safety Integrity Level (SIL), suitable for applications in3

Mission time20Year(s)

Mechanical data

Actuating panelslateral

Active arealateral

Mechanical lifetime, minimum1,000,000Operations

Note (Mechanical lifetime)Actuating speed < 0.25 m/sOperations for door weights ≤ 5 kg

Latching force, approx.18N

MountingA screw length of 25 mm is sufficient for sensor mounting and for side mounting of the actuators. 30 mm long screws are recommended when the actuator is mounted upright and/or when the sealing discs are used.

Type of the fixing screws2x M4 (cylinder head screws with washers DIN 125A / form A)

Tightening torque of the fixing screws, minimum2.2Nm

Tightening torque of the fixing screws, maximum2.5Nm

Mechanical data - Switching distances

Switch distance, typical12mm

Assured switching distance "ON" S_ao10mm

Assured switching distance "OFF" S_ar16mm

Note (switching distance)All switching distances in accordance EN IEC 60947-5-3

Hysteresis (Switching distance), maximum2mm

Repeat accuracy R0.5mm

Note (Repeat accuracy R)Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle).Minimum clearance

Mechanical data - Connection technique

Note (length of the sensor chain)Cable length and cross-section change the voltage drop dependiing on the output current

Note (series-wiring)Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD

Length of cable2m

TerminationCable (Y-UL 2517), 8-pole

Cable section, maximum8 x 0.35 mm²

Wire cross-section22AWG

Cable typeLiYY

Mechanical data - Dimensions

Length of sensor22mm

Width of sensor106.3mm

Height of sensor25mm

Ambient conditions

IP Degree of protectionIP65IP67IP69

Ambient temperature-28 ... +70 °C

Storage and transport temperature-28 ... +85 °C

Material temperature resistance of the cable (in motion), minimum-10°C

Material temperature resistance of the cable (at rest), minimum-30°C

Relative humidity, maximum93%

Note (Relative humidity)non-condensingnon-icing

Resistance to vibrations10 … 55 Hz, amplitude 1 mm

Restistance to shock30 g / 11 ms

Protection classIII

Permissible installation altitude above sea level, maximum2,000m

Ambient conditions - Insulation values

Rated insulation voltage U_i32 VDC

Rated impulse withstand voltage U_imp0.8kV

Overvoltage categoryIII

Degree of pollution3

Electrical data

Operating voltage24 VDC -15 % / +10 % (stabilised PELV power supply)

Operating current, minimum0.5mA

No-load supply current I₀, typical35mA

Rated operating voltage24VDC

Operating current600mA

Required rated short-circuit current100A

Time to readiness, maximum2,000ms

Switching frequency, maximum1Hz

Electrical fuse rating, maximum2A

Electrical data - Safety digital inputs

Designation, Safety inputsX1 and X2

Current consumption of the safety inputs5mA

Test pulse duration, maximum1ms

Test pulse interval, minimum100ms

Classification ZVEI CB24I, SinkC1

Classification ZVEI CB24I, SourceC1C2C3

Electrical data - Safety digital outputs

Designation, Safety outputsY1 and Y2

Rated operating current (safety outputs)250mA

Output current, (fail-safe output), maximum0.25A

Design of control elementsshort-circuit proof, p-type

Voltage drop U_d, maximum1V

Leakage current I_r, maximum0.5mA

Voltage, Utilisation category DC-1224VDC

Current, Utilisation category DC-120.25A

Voltage, Utilisation category DC-1324VDC

Current, Utilisation category DC-130.25A

Test pulse interval, typical1000ms

Test pulse duration, maximum0.3ms

Classification ZVEI CB24I, SourceC2

Classification ZVEI CB24I, SinkC1C2

Electrical data - Diagnostic outputs

Designation, Diagnostic outputsOUT

Design of control elementsshort-circuit proof, p-type

Voltage drop U_d, maximum2V

Voltage, Utilisation category DC-1224VDC

Current, Utilisation category DC-120.05A

Voltage, Utilisation category DC-1324VDC

Current, Utilisation category DC-130.05A

Utilisation category DC-1224 VDC / 0.05 A

Electrical data - Electromagnetic compatibility (EMC)

Interfering radiationIEC 61000-6-4

Status indication

Note (LED switching conditions display)LED green: Supply voltageLED red: FaultLED yellow: Operating condition

Pin assignment

PIN 11A1 Ue: (1)

PIN 2X1 Safety input 1

PIN 3A2 GND Blue

PIN 4Y1 Safety output 1 Black

PIN 5OUT Diagnostic output OUT Grey

PIN 6X2 Safety input 2 violet

PIN 7Y2 Safety output 2 red

PIN 8IN without function Pink

Scope of delivery

Scope of deliveryActuator must be ordered separately.

Accessory

Recommendation (actuator)RST 36-1RST 36-1-R

Recommended safety switchgearPROTECT PSC1SRB-E-201LCSRB-E-301ST

Note

Note (General)Anforderungen an die Auswertung: Zweikanaliger Sicherheitseingang, geeignet für p-schaltende Sensoren mit Schließerfunktion. Die Funktionstests der Sensoren mit zyklischem Abschalten der Sensorausgänge für max. 1 ms müssen von der Auswertung toleriert wer

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 07/05/2026, 17:34