.png?id=497683c97d2c2689df20070a5453bdbb){kind=logo}
BDF200-NHK-11-LMWH-WT30-B
Item number:
103037919
BDF200-NHK-11-LMWH-WT30-B
Item number:
103037919
| Product type description: BDF 200-(1)-(2)-(3)-(4)-(5)-(6) |
| (1) | |
| NH | Emergency stop pushbutton without protective collar |
| NHK | Emergency stop with protective collar |
| LT.. | Selection (Color Illuminated pushbutton) |
| LM.. | Indicator light (selection colour) |
| DT.. | Push button (Selection Color) |
| PT.. | Mushroom push button |
| (2) | |
| 20 | with EMERGENCY-STOP: 2 NO position 2-4 > without EMERGENCY STOP: 2 NO position 1-4 |
| 11 | with EMERGENCY-STOP: 1 NO/1 NC position 2-4 > without EMERGENCY STOP: 1 NO/1 NC position 1-4 |
| 10 | with EMERGENCY-STOP: 1 NO position 2-4 > without EMERGENCY STOP: 1 NO position 1-4 |
| (3) | |
| WS 2/3 | Selector switch, 2/3 switch position |
| WT 2/3 | Selector switch, 2/3 switch positions |
| SW 20 | Key switch/button, 2 switch positions |
| LT.. | Illuminated control push button (selection colour) |
| LM.. | Indicator light (selection colour) |
| DT.. | Push button (Selection Color) |
| PT.. | Mushroom push button |
| (4) | |
| WS 2/3 | Selector switch, 2/3 switch position |
| WT 2/3 | Selector switch, 2/3 switch positions |
| SW 20 | Key switch/button, 2 switch positions |
| LT.. | Illuminated control push button (selection colour) |
| LM.. | Indicator light (selection colour) |
| DT.. | Push button (Selection Color) |
| PT.. | Mushroom push button |
| (5) | |
| LT.. | Illuminated control push button (selection colour) |
| LM.. | Indicator light (selection colour) |
| DT.. | Push button (Selection Color) |
| PT.. | Mushroom push button |
| (6) | |
| without | without indicator lamp |
| G24 | with indicator lamp, red (only for -10) |
| (7) | |
| without | Included in standard version |
| 2875 | Freely installable button caps |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
- slender shock-proof thermoplastic enclosure
- to be installed at an ergonomic favourable position
- to be fitted to commercial-off-the-shelf aluminium profiles
- Thermoplastic enclosure
- slender shock-proof enclosure
- large range of Illuminated pushbuttons, Selector switches, LED indicator lights, Key-operated selector switches and Emergency-Stop buttons
- Emergency stop, on/off and reset functions available
- The position of the pushbuttons on the control panel can be freely selected.
- Field labelling with separate plastic cover
- Freely installable button caps for an optimal adaptation to the plants
Ordering data
| Product type description |
BDF200-NHK-11-LMWH-WT30-B |
| Article number (order number) |
103037919 |
| EAN (European Article Number) |
4030661543789 |
| eCl@ss number, version 12.0 |
27-37-12-16 |
| eCl@ss number, version 11.0 |
27-37-12-16 |
| eCl@ss number, version 9.0 |
27-37-12-16 |
| ETIM number, version 7.0 |
EC000225 |
| ETIM number, version 6.0 |
EC000225 |
| Note (Ordering data) |
Notice: see ordering code |
Approvals - Standards
|
cULus |
General data
| Standards |
EN ISO 13850 EN IEC 60947-5-1 EN IEC 60947-5-5 EN IEC 60947-1 |
|
| Climatic stress |
IEC 60068-2-30 |
|
| Versions |
Assembly housing |
|
| Housing material |
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing |
|
| Positions used, position 1 |
Emergency stop, with protective collar |
|
| Positions used, position 2 |
|
|
| Positions used, position 3 |
Selector switch spring return 3 positions |
|
| Positions used, position 4 |
|
|
| Gross weight |
280 g |
General data - Features
| Emergency-Stop button |
Yes |
| Protective collar in housing cover |
Yes |
| Safety functions |
Yes |
| Removable Terminals |
Yes |
| Number of cable wires |
16 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
100,000 Operations |
Mechanical data
| Position of the cable gland |
bottom |
| Mechanical life, Emergency-Stop button |
100,000 Operations |
| Mechanical life, Command devices |
1,000,000 Operations |
| Mechanical life, Key operated- selector switch |
30,000 Operations |
| Actuating stroke |
3 mm |
| Actuating force, maximum |
8 N |
| Note (Actuating force) |
each contact |
| Contact force, typically |
1 N |
| Mounting |
interior mounting holes |
| Type of the fixing screws |
2x M5 |
| Tightening torque of the fastening screws for the housing cover, minimum |
0.7 Nm |
| Tightening torque of the fastening screws for the housing cover, maximum |
0.8 Nm |
| Tightening torque of the cable gland, maximum |
4 Nm |
| Note |
Miaximum tightening cable gland cap nut 3 Nm |
Mechanical data - Connection technique
| Cable entry |
M20 cable gland |
| Cable cross-section of the cable glands, minimum |
6 mm |
| Cable cross-section of the cable glands, maximum |
13 mm |
| Wire cross-section |
0.5 mm2 |
| Terminal (mechanical) |
Removable screw terminals |
Mechanical data - Dimensions
| Width |
40 mm |
| Height |
69 mm |
| Depth |
249 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-25 ... +65 °C |
| Resistance to vibrations |
10 … 100 Hz, with 20 g |
| Restistance to shock |
100 g / 6 ms |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
2.5 kV |
| Overvoltage category |
III |
| Overvoltage category |
III |
| Degree of pollution |
3 |
Electrical data
| Thermal test current |
2 A 2.5 A |
| LED current consumption (operating elements) |
16 mA |
| Rated operating voltage |
24 VDC |
| Utilisation category AC-15 |
24 VAC |
| Utilisation category AC-15 |
2 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
1 A |
| External wire and device fuse rating |
2.5A T |
| Suitable for low-voltages |
≥ 5 V / ≥ 1 mA |
| Switching principle |
Slow action cross-point-system |
| Maximum switching frequency |
1,200 /h |
| Material of the contacts, electrical |
Ag-Ni 10, gold-plated |
Status indication
| Colour of the indicator lamp |
without (Blanking plug, black) |
Other data
| Note (applications) |
Suitable for 40 mm profiles |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
Brochure
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | BDF200 |
| Type: | See ordering code |
| Description of the component: | Control panel |
| Relevant Directives: | Machinery Directive 1) | 2006/42/EC |
| RoHS-Directive | 2011/65/EU |
| Affixing of the CE conformity mark: | 1) for safety components, whose type plate is labelled "safety component" for device versions with emergency-stop function |
| Applied standards: | EN 60947-5-1:2017 EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 EN ISO 13850:2015 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, May 5, 2020 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | BDF200 |
| Type: | See ordering code |
| Description of the component: | Control panel |
| Relevant legislation: | Supply of Machinery (Safety) Regulations 1) | 2008 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 | |
| 1) for safety components, whose type plate is labelled "safety component" for device versions with emergency-stop function | ||
| Designated standards: | EN 60947-5-1:2017 + AC:2020 EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1) EN ISO 13850:2015 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, November 18, 2022 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 05/11/2024, 6:24 pm