.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
IFL-N-2-8M-01P-5M
IFL-N-2-8M-01P-5M
Downloads
| Product type description: IFL (1)-(2)(3)-(4)(5)(6)(7) |
| (1) | |
| 2 | Switching distance 2 mm |
| 3 | Switching distance 3 mm |
| B | Quasi-embeddable |
| (2) | |
| 8 | Cylinder, thread M8 |
| (3) | |
| without | Standard body |
| M | Miniature body |
| (4) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (5) | |
| without | Cable |
| ST | Male connector |
| (6) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (7) | |
| N | n-type |
| P | p-type |
- Design M 8 x 1
Ordering data
| Product type description |
IFL-N-2-8M-01P-5M |
| Article number (order number) |
101147293 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
flush |
| Housing material |
Stainless steel |
| Active area |
Plastic |
| Material of the nuts |
Stainless steel |
General data - Features
| Integral system diagnostics, status |
Yes |
| Cable sleeve |
No |
| Number of cable wires |
3 |
Mechanical data
| Note (Tightening torque of nuts) |
Thread must not be loaded in the head area. |
Mechanical data - Switching distances
| Nominal switching distance Sn |
2 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
Mechanical data - Connection technique
| Length of cable |
5 m |
| Termination |
Cable |
| Number of cable wires |
3 |
| Wire cross-section |
0.25 mm2 |
| Material of the Cable mantle |
PUR |
Mechanical data - Dimensions
| ISO thread of the sensor |
M8 |
| width across flats |
13 BK |
| Length of sensor |
50 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
17 mA |
| Operating current |
150 mA |
| Switching element |
Opener (NC) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating suppressed switch-on fault impulse wire-breakage monitoring Voice transmission protection |
| Switching frequency, approx. |
600 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
2.5 V |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 17/06/2025, 20:40
Recently viewed
SRB400CA/QT 24VDC
