.png?id=dd4d6d28421d06b6d1d6f7ffec683d49){kind=logo}
AZM 415-33ZPDKA 110 VAC
Item number:
101117715
Archive
AZM 415-33ZPDKA 110 VAC
Item number:
101117715
- Ball latch for each door, individually adjustable up to 400 N
- 3 switches in one enclosure
- Spring-loaded actuators
- for double doors
- 141 mm x 125 mm x 46,5 mm
- Metal enclosure
- Interlock with protection against incorrect locking.
- Robust design
- Long life
- 2 cable entries M 20 x 1.5
- Cut clamp termination
Ordering data
| Note (Delivery capacity) |
Not available! |
| Product type description |
AZM 415-33ZPDKA 110 VAC |
| Article number (order number) |
101117715 |
| EAN (European Article Number) |
4030661047157 |
| eCl@ss number, version 12.0 |
27-27-26-03 |
| eCl@ss number, version 11.0 |
27-27-26-03 |
| eCl@ss number, version 9.0 |
27-27-26-03 |
| ETIM number, version 7.0 |
EC002593 |
| ETIM number, version 6.0 |
EC002593 |
Approvals - Standards
|
cULus CCC |
General data
| Standards |
BG-GS-ET-19 EN IEC 60947-5-1 |
| Working principle |
electromechanical |
| Housing material |
Aluminium |
| Housing coating material |
painted |
| Gross weight |
1,240 g |
General data - Features
| Power to lock |
Yes |
| Number of actuating directions |
1 |
| Number of auxiliary contacts |
3 |
| Number of safety contacts |
3 |
| Number of guard doors |
2 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
Mechanical data
| Mechanical life, minimum |
1,000,000 Operations |
| Holding force |
2,500 N |
| Holding force FZh in accordance with EN ISO 14119 |
3,500 N |
| Note (Clamping force) |
each guard |
| Latching force, minimum |
150 N |
| Latching force, maximum |
400 N |
| Positive break travel |
4.5 mm |
| Positive break force, minimum |
15 N |
| Actuating speed, maximum |
0.2 m/s |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, minimum |
2 x 0.75 mm² |
| Cable section, maximum |
2 x 2.5 mm² |
| Note |
All indications including the conductor ferrules. |
Mechanical data - Dimensions
| Length of sensor |
46.5 mm |
| Width of sensor |
141 mm |
| Height of sensor |
125 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +50 °C |
| Note (Relative humidity) |
non-condensing non-icing |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Rated control voltage |
110 VAC |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
4 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
1 A |
| Electrical power consumption, maximum |
10 W |
| Switching element |
NO contact, NC contact |
| Switching principle |
Slow action |
| Material of the contacts, electrical |
Silver |
Other data
| Note (applications) |
sliding safety guard hinged safety guard |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
CCC certification
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Door handle actuator
Accessories
101100887 TK-M5
- For manual release using M5 triangular key, available as accessory
- For maintenance, installation, etc.
101149120 MOUNTING PLATE KPL. MP AZM 415
- For simple mounting
- Subsequent adjustment enabled
- Suitable for all conventional profile systems
101166328 TFA-010
- Pre-positioning
- The actuator is independent from the centring device.
- Smooth insertion or retraction of the actuator
Actuator
101128545 ACTUATOR AZ/AZM 415-B1
- For sliding doors
- Actuators with return spring
- Tolerates up to max. 6 mm overtravel
101142540 ACTUATOR AZ/AZM 415-B4PS
- For sliding doors
- with locking bolt and ball latch
101144796 ACTUATOR AZ/AZM 415-B2
- Particularly suitable for hinged guards
- For very smal actuating radii in line with the plane of the actuator
101144797 ACTUATOR AZ/AZM 415-B3
- Particularly suitable for hinged guards
- For very smal actuating radii at 90° to the plane of the actuator
| UK Declaration of Conformity |  |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | AZM 415 |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 EN ISO 14119:2013 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, November 25, 2021 |
 |
| Authorised signature Philip Schmersal Managing Director |
| EU Declaration of Conformity | |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | AZM 415 |
| Type: | See ordering code |
| Description of the component: | Interlocking device with electromagnetic interlock for safety functions |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-1:2017 EN ISO 14119:2013 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, August 3, 2020 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 2024-11-26, 2:59 p.m.