.png?id=dd4d6d28421d06b6d1d6f7ffec683d49){kind=logo}
EX-BNS 180-12Z-2187-2-3G/D
EX-BNS 180-12Z-2187-2-3G/D
- Explosion protection for ATEX Zones 2 and 22
- Thermoplastic enclosure
- Ø M18
- Particularly large switching distance
- Insensitive to transverse misalignment
- Suitable for food processing industry only in combination with BP 15 SS
- no mechanical wear
Ordering data
| Product type description |
EX-BNS 180-12Z-2187-2-3G/D |
| Article number (order number) |
101185256 |
| EAN (European Article Number) |
4030661333328 |
| eCl@ss number, version 12.0 |
27-27-44-01 |
| eCl@ss number, version 11.0 |
27-27-24-02 |
| eCl@ss number, version 9.0 |
27-27-24-02 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Explosion protection
| Explosion protection: regulations |
EN IEC 60079-0 EN IEC 60079-15 EN 60079-31 |
| Explosion protection zones |
2 22 |
| Explosion protection category |
3G 3D |
| Explosion protection designation |
D II 3G Ex nC IIC T6 Gc X D II 3D Ex tc IIIC T80°C Dc X |
Manufacturer declaration |
ATEX Zone 2 and 22 |
General data
| Standards |
BG-GS-ET-14 EN IEC 60947-5-3 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
quasi-flush |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Gross weight |
46 g |
General data - Features
| Coding |
Yes |
| Short circuit detection |
Yes |
| Cross-circuit detection |
Yes |
| Number of normally closed (NC) |
2 |
| Number of normally open (NO) |
1 |
| Number of safety contacts |
2 |
| Number of cable wires |
6 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D- Value Normally-closed contact/Normally open contact (NC/NO) |
25,000,000 Operations |
Mechanical data
| Active area |
front side |
| Actuating element |
Magnet |
| Switching distance actuator |
Actuating magnet BP 6, Sao: 8 mm Actuating magnet BP 6, Sar: 20 mm Actuating magnet BP 8, Sao: 8 mm Actuating magnet BP 8, Sar: 20 mm Actuating magnet BP 10, Sao: 18 mm Actuating magnet BP 10, Sar: 28 mm Actuating magnet BP 15 SS, Sao: 18 mm Actuating magnet BP 15 SS, Sar: 28 mm |
| Impact energy, maximum |
2 J |
| Direction of motion |
Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Assured switching distance "ON" Sao |
18 mm 8 mm |
| Assured switching distance "OFF" Sar |
22 mm 32 mm |
Mechanical data - Connection technique
| Length of cable |
1 m |
| Termination |
Cable |
| Wire cross-section |
0.25 mm2 |
| Wire cross-section |
23 AWG |
| Material of the Cable mantle |
PVC |
Mechanical data - Dimensions
| ISO thread of the sensor |
M18 |
| Length of sensor |
36 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
Electrical data
| Switching voltage, maximum |
120 VAC |
| Switching voltage, maximum |
120 VDC |
| Switching current, maximum |
0.25 A |
| Switching capacity, maximum |
5 W |
| Switching element |
1 NO contact, 2 NC contacts |
| Switching frequency, maximum |
5 Hz |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
BP 10 BP 8 BP 6 BP 15 SS |
| Recommended safety switchgear |
SRB-E-301ST SRB-E-201LC |
Note
| Note (General) |
Contact symbols shown for the closed condition of the guard device. The safety sensor must be mounted in such a way that actuation with another magnet is impossible (concealed mounting according to EN ISO 14119) |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UKCA Declaration of Conformity
Brochure
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Characteristic curve
101091837 BP 6
- Unenclosed
- S-pole marked red
101054816 BP 8
- Unenclosed
- S-pole marked red
101057531 BP 10
- Unenclosed
- Colour coding of poles by lables
101139818 BP 15 SS
- Suitable for food processing industry
- Stainless steel
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | EX-BNS 180 |
| Type: | See ordering code |
| Marking: | D II 3G Ex nC IIC T6 Gc X D II 3D Ex tc IIIC T80°C Dc X |
| Description of the component: | Safety-sensor with magnetic operating principle in combination with the AES / SRB safety-monitoring modules from Schmersal or an equivalent safety-oriented control system fulfilling the requirements of the EN 60947-5-3. |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| Explosion Protection Directive (ATEX) | 2014/34/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-3:2013 EN ISO 14119:2013 EN IEC 60079-0:2018 EN IEC 60079-15:2019 EN 60079-31:2014 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, October 26, 2022 |
 |
| Authorised signature Philip Schmersal Managing Director |
Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 2024-11-27, 11:52 p.m.