SSB-RH-NG-2-O-S-V01
SSB-RH-NG-2-O-S-V01
- Magnetic track sensor box
- 4 tracks, 2 of them with high-precision angle sensor technology
- Maintenance-free signal storage and switching in case of power failure
- Wide angle LED track display
- Redundant signal output via additional M12 socket
- 4 tracks, 2 optional for fine positioning
- optional fine positioning tracks with prewarning indication
Ordering data
Product type description |
SSB-RH-NG-2-O-S-V01 |
Article number (order number) |
103038399 |
EAN (European Article Number) |
4030661566443 |
eCl@ss number, version 12.0 |
27-27-43-02 |
eCl@ss number, version 11.0 |
27-27-01-05 |
eCl@ss number, version 9.0 |
27-27-01-05 |
ETIM number, version 7.0 |
EC002544 |
ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
|
cULus |
General data
Working principle |
Magnetic drive |
Housing material |
Plastic, glass-fibre-reinforced |
Material of the housing cover |
Polycarbonate |
Gross weight |
336 g |
General data - Features
Latching |
Yes |
Wire breakage detection |
Yes |
Suitable for elevators |
Yes |
Number of LEDs |
7 |
Number of snap-in contacts |
4 |
Number of signalling outputs |
1 |
Mechanical data
Actuating panels |
front side |
Actuating element |
Magnet |
Mechanical life, minimum |
1,000,000,000 Operations |
Minimum distance devices |
50 mm |
Actuation direction |
On when driving over with north magnet in driving direction |
Actuating speed, maximum |
9 m/s |
Mounting |
rear with 2 threaded bolts |
Type of the fixing screws |
2x M4 |
Tightening torque of the fixing screws, minimum |
2 Nm |
Tightening torque of the fixing screws, maximum |
4 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
Switching distance Smin, minimum |
2 mm |
Switching distance Smax, maximum |
15 mm |
Note (switching distance) |
Recommended 7mm |
Repeat accuracy R |
0.5 mm |
Mechanical data - Connection technique
Terminal (mechanical) |
Connector plug M12, 8-pole, A-coded |
Mechanical data - connector side A
Connector typ |
Male connector, M12 |
Connector coding |
A |
Connector latching |
Screw locking |
Number of pol, side A |
8 |
Mechanical data - connector side B
Connector typ |
Female connector, M12 |
Connector coding |
A |
Connector latching |
Screw locking |
Number of pol, side B |
8 |
Mechanical data - Dimensions
Length of sensor |
125 mm |
Width of sensor |
110 mm |
Height of sensor |
24.4 mm |
Ambient conditions
Degree of protection |
IP54 IP65 |
Ambient temperature |
-25 ... +70 °C |
Storage and transport temperature |
-40 ... +85 °C |
Relative humidity, maximum |
95 % |
Note (Relative humidity) |
non-condensing non-icing |
Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
Restistance to shock |
30 g / 11 ms |
Protection class |
III |
Permissible installation altitude above sea level, maximum |
2,000 m |
Ambient conditions - Insulation values
Rated insulation voltage Ui |
32 VDC |
Rated impulse withstand voltage Uimp |
1 kV |
Overvoltage category |
III |
Degree of pollution |
3 |
Degree of pollution |
3 |
Electrical data
Current consumption at 24V, minimum |
11 mA |
No-load supply current I0, typical |
40 mA |
Rated operating voltage |
24 VDC |
Operating current |
1,500 mA |
Utilisation category DC-12 |
24 VDC |
Utilisation category DC-12 |
0.3 A |
Utilisation category DC-13 |
24 VDC |
Utilisation category DC-13 |
0.3 A |
Switching capacity, maximum |
7.2 W |
Switching element |
bistable contact |
Switching principle |
Reed and hall technology |
Bounce duration, maximum |
0.3 ms |
Maximum switching time close |
1 ms |
Maximum switching time open |
0.1 ms |
Electrical fuse rating, maximum |
2 A |
Electrical data - Digital Output
Output current, maximum |
300 mA |
Design of control elements |
Reed contacts |
Voltage, Utilisation category DC-12 |
24 VDC |
Current, Utilisation category DC-12 |
1.5 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
1.5 A |
Accessory
Recommendation (actuator) |
BP 15 BP 15/2 |
Recommendation (actuator, lift switchgear) |
BP 15 |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 2024-12-22, 2:51 a.m.