PS226-Z11-R200-U2

Item number: 103046669

PS226-Z11-R200-U2

Item number: 103046669

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:
PS(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)-(12)

(1)
without	non-EX version
EX	Types of protection Ex d and t, to Zone 1/21
EXI	Types of protection Ex i and t, up to Zone 1/21

(2)
215	Metal enclosure
216	Thermoplastic enclosure
226	Plastic housing with 2 cable entries

(3)
L	L-hole (standard)
	elongated hole

(4)
Z11	Snap action 1 NO contact / 1 NC contact
Z02	Snap action 2 NC contacts
Z12	Snap action 1 NO contact / 2 NC contact
Z11R	Snap action 1 NO contact / 1 NC contact with latching
Z01R	Snap action 1 NC contact with latching
Z02R	Snap action 2 NC contacts with latching
T11	Slow action 1 NO contact / 1 NC contact
T02	Slow action 2 NC contacts
T20	Slow action 2 NO contact
T12	Slow action 1 NO contact / 2 NC contact
T21	Slow action 2 NO contact / 1 NC contact
T03	Slow action 3 NC contacts
T11UE	Slow action 1 NO contact / 1 NC contact with overlapping contacts
T02H	Slow action 2 NC contacts with staggered contacts
T11K	Slow action 1 NO contact + 1 NC contact - short-stroke
T10	Slow action 1 NO contact
T02K	Slow action 2 NO contacts short-stroke
T20H	Slow action 2 NO contacts staggered

(5)
A1	Contacts silver plated (Standard)
A2	Gold contacts 0,3 μm
A3	Gold contacts 1,0 μm
	Gold contacts 3,0 μm

(6)
G	without indication light
	integrated status display

(7)
M16	Cable entry M20
ST	cable entry M16
STR	Connector plug M12 - plastic - bottom
STL	Connector plug M12, right
STM	Connector plug M 12, left
	Connector plug M12, metal

(8)
S200	plunger S200 Ø 6 mm
S210	Plunger Ø 8,6 mm
S211	Plunger Ø 10,3 mm
S221	Plunger Ø 9,8 mm
R200	Roller plunger R200
R201	Roller plunger - stainless steel roller Ø 9,5mm
R210	Roller plunger - plastic roller Ø 12mm
K201	Roller plunger - stainless steel roller - width 5,3 mm - Ø 12mm
K200	Offset roller lever - plastic roller- width 5.3 mm - Ø 12 mm
K201	Roller plunger - stainless steel roller - width 5,3 mm - Ø 12mm
K210	Offset roller lever - plastic roller- width 5mm - Ø 14mm
K211	Offset roller lever - stainless steel roller - width 5mm - Ø 14mm
K220	Offset roller lever - plastic roller- width 7.6 mm - Ø 14 mm
K230	Angle roller lever - plastic roller Ø 14 mm
K231	Roller plunger - stainless steel roller Ø 14mm (Standard)
K240	Angle roller lever with plastic roller Ø 22 mm - right-bent
K250	Angle roller lever with plastic roller Ø 22 mm - left-bent
H200	Roller lever - plastic roller Ø 16 m - lever length 24 mm
H202	Roller lever - brass roller Ø 16mm - lever length 24mm (Standard)
H230	Roller lever - plastic roller Ø 16mm - lever length 28 mm
H232	Roller lever - brass roller Ø 16mm - lever length 28 mm
H236	Roller lever - rubber roller Ø 16mm - lever length 28 mm
N200	Roller lever 2 mm Toothing (24...26mm) - Plastic roller Ø 20 mm - Width 9.8 mm
N201	Roller lever adjustable in 2 mm steps (24...66mm) - stainless steel roller Ø 20mm - width 9,8 mm
N202	Roller lever - adjustable in 2 mm steps (24...66mm) - brass roller Ø 20mm - width 9,8 mm
N206	Roller lever - adjustable in 2 mm steps (24...66mm) - rubber roller Ø 50mm - width 16 mm
N210	Roller lever - adjustable in 2 mm steps (26...66 mm) - plastic roller Ø 20mm - width 4 mm - long- angled - locking washer
N280	Roller lever -adjustable in 2 mm steps (24...66mm) - plastic roller Ø 20mm - width 5 mm - long - locking washer
J200	Rod lever - plastic - 200mm -Ø 6mm
J201	Rod lever - stainless steel - 200mm -Ø 6mm (Standard)
J203	Rod lever - aluminium - 200mm -Ø 6mm
F230	Spring rod - stainless steel - 150.4 mm
F231	Spring rod - stainless steel - 70.2 mm
A200	Special actuating bolt - plastic - valve control

(9)
U1	no intent rotation (Standard)
U2	intent rotation 45°
U3	intent rotation 90°
U4	intent rotation 135°
U5	intent rotation 180°
U6	intent rotation 225°
U7	intent rotation 275°
	intent rotation 315°

(10)
X1	no lever rotation (Standard)
X2	lever rotation 15°
X3	lever rotation 30°
X4	lever rotation 45°
X5	lever rotation 60°
X6	lever rotation 75°
X7	lever rotation 90°
X8	lever rotation 105°
X9	lever rotation 120°
X10	lever rotation 135°
X11	lever rotation 150°
X12	lever rotation 165°
X13	lever rotation 180°
X14	lever rotation 195°
X15	lever rotation 210°
X16	lever rotation 225°
X17	lever rotation 240°
X18	lever rotation 255°
X19	lever rotation 270°
X20	lever rotation 285°
X21	lever rotation 300°
X22	lever rotation 315°
X23	lever rotation 330°
	lever rotation 345°

(11)
I	Roller outside (Standard)
	Roller inside

(12)
T	-30...+80°C (Standard)
	-40...+80°C

(13)
Speze	-9990

(14)
without	Zone 2 and 22
3GD	Zone 2 and 22
2D	Zone 21
3D	Zone 22

Not all component variants, which are possible according to this order code are available and/or technically feasible.

Actuating head rotated by 90°
Quick connection technology as connection terminals rotated by 45°
cable entry 1 x M20 x 1,5
thermoplastic enclosure with foldable latching cover
cable entry 2 x M20 x 1,5
Design to EN 50047
Simple and quick to adjust the control elements by 45°.
LED version available

Ordering data

Product type description	PS226-Z11-R200-U2
Article number (order number)	103046669
EAN (European Article Number)	4030661568881
eCl@ss number, version 12.0	27-27-26-01
eCl@ss number, version 11.0	27-27-26-01
eCl@ss number, version 9.0	27-27-26-01
ETIM number, version 7.0	EC000030
ETIM number, version 6.0	EC000030

Approvals - Standards

Certificates

cULus

CCC

General data

Standards	EN IEC 60947-5-1
Housing construction form	Norm construction design
Actuator type to EN 50047	c
Housing material	Plastic, glass-fibre-reinforced

General data - Features

Safety functions	Yes
Number of auxiliary contacts	1
Number of safety contacts	1

Safety classification

Standards	EN ISO 13849-1
B_10D Normally-closed contact (NC)	20,000,000 Operations
Mission time	20 Year(s)

Mechanical data

Actuating element	Roller plunger R200
Roller material	Plastic
Mechanical life, minimum	10,000,000 Operations
Positive break force, minimum	40 N
Actuating speed, minimum	10 mm/min
Actuating speed, maximum	0.5 m/s
Tightening torque of the fixing screws	1.2 Nm
Actuator rotation	90 °

Mechanical data - Connection technique

Termination	Screw terminals M20 x 1.5
Cable section, minimum	0.34 mm²
Cable section, maximum	1.5 mm²
Tightening torque of electrical connection, minimum	0.6 Nm
Tightening torque of electrical connection, maximum	0.8 Nm
Note (Cable entry)	Settle length of the conductor: 5...6mm

Mechanical data - Dimensions

Length of sensor	33 mm
Width of sensor	59 mm
Height of sensor	85.6 mm

Ambient conditions

Degree of protection	IP66 IP67
Ambient temperature	-30 ... +80 °C
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	250 VAC
Rated impulse withstand voltage U_imp	4 kV
Degree of pollution	3

Electrical data

Thermal test current	10 A
Required rated short-circuit current	400 A
Utilisation category AC-15	240 VAC
Utilisation category AC-15	3 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	3 A
Switching element	1 NO contact, 1 NC contacts
Switching principle	Snap action
Maximum switching frequency	5,000 /h
Material of the contacts, electrical	Silver

Product picture (catalogue individual photo)

ID: kps2rf03

| 647.1 kB | .jpg | 352.778 x 411.339 mm - 1000 x 1166 px - 72 dpi

| 38.6 kB | .png | 73.731 x 86.078 mm - 209 x 244 px - 72 dpi

| 50.6 kB | .jpg | 105.833 x 123.472 mm - 300 x 350 px - 72 dpi

Dimensional drawing basic component

ID: kps2xg04

| 6.5 kB | .png | 74.083 x 63.853 mm - 210 x 181 px - 72 dpi

| 161.6 kB | .jpg | 352.778 x 304.447 mm - 1000 x 863 px - 72 dpi

Dimensional drawing actuator

ID: kps2-b02

| 126.9 kB | .jpg | 352.778 x 252.236 mm - 1000 x 715 px - 72 dpi

| 6.1 kB | .png | 74.083 x 52.917 mm - 210 x 150 px - 72 dpi

Switch travel diagram

Information on switch travel diagram
ICO_LEG_sw-close Contact closed
ICO_LEG_sw-open Contact open
ICO_LEG_sw-var Setting range
ICO_LEG_sw-l Latching point
ICO_LEG_sw-p Positive opening path/angle
VS Adjustable range of NO contact
VÖ Adjustable range of NC contact
N After travel

The switching routes shown for the closer and opener contacts can be transferred to other contact combinations.

ID: kps11s01

| 2.2 kB | .png | 74.083 x 41.628 mm - 210 x 118 px - 72 dpi

| 69.9 kB | .jpg | 352.778 x 198.261 mm - 1000 x 562 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: kps2xk01

| 58.0 kB | .jpg | 352.778 x 111.478 mm - 1000 x 316 px - 72 dpi

| 2.7 kB | .png | 74.083 x 23.283 mm - 210 x 66 px - 72 dpi

Video ID: Positionsschalter-PS

Position switches series PS (Vimeo)

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

PS116,
PS215, PS216, PS226,
PS315, PS316

Type:

See ordering code

Description of the component:

Position switch

Relevant Directives:	Low Voltage Directive	2014/35/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-1:2017

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, March 3, 2021

Authorised signature
Philip Schmersal
Managing Director

UK Conformity Declaration

Pdf

UK Declaration of Conformity

Company:

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.

Name of the component:

PS116,
PS215, PS216, PS226,
PS315, PS316

Type:

See ordering code

Description of the component:

Position switches

Relevant legislation:	Electrical Equipment (Safety) Regulations	2016
	The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations	2012

Designated standards:

EN 60947-5-1:2017

UK-Importer /
Person authorised for the compilation of the technical documentation:

Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL

Place and date of issue:

Wuppertal, August 19, 2021

Authorised signature
Philip Schmersal
Managing Director

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 21/11/2024, 11:02 pm

Cart

Login Register now

PS226-Z11-R200-U2

PS226-Z11-R200-U2

Ordering data

Approvals - Standards

General data

General data - Features

Safety classification

Mechanical data

Mechanical data - Connection technique

Mechanical data - Dimensions

Ambient conditions

Ambient conditions - Insulation values

Electrical data

Language filter

Datasheet

Operating instructions and Declaration of conformity

UL Certificate

CCC certification

Brochure

SISTEMA-VDMA library

Download the latest version of Adobe Reader

Product picture (catalogue individual photo)

Dimensional drawing basic component

Dimensional drawing actuator

Switch travel diagram

Diagram

Video ID: Positionsschalter-PS