EX-SLG440-ER-0900-04-H
EX-SLG440-ER-0900-04-H
- Ex-Zone 1 and 21
- Range up to 20m
- Protected mode
- Integrated contactor control
- Beam coding
Ordering data
Product type description |
EX-SLG440-ER-0900-04-H |
Article number (order number) |
103047627 |
EAN (European Article Number) |
4030661619071 |
eCl@ss number, version 12.0 |
27-27-27-03 |
eCl@ss number, version 11.0 |
27-27-27-03 |
eCl@ss number, version 9.0 |
27-27-27-03 |
ETIM number, version 7.0 |
EC001832 |
ETIM number, version 6.0 |
EC001832 |
Explosion protection
Explosion protection: regulations |
EN IEC 60079-0 EN 60079-1 EN 60079-28 EN 60079-31 |
Explosion protection zones |
1 21 |
Explosion protection category |
2G 2D |
Explosion protection designation |
D II 2G Ex db op is IIA T6 Gb D II 2D Ex op is tb IIIC T80°C Db |
General data
Standards |
EN IEC 61496-2 EN IEC 62061 EN ISO 13849-1 EN IEC 61496-1 |
Housing material |
Shatterproof glass |
Reaction time, maximum |
10 ms |
General data - Features
Restart interlock (manual reset) |
Yes |
Contactor control integrated |
Yes |
Beam coding available |
Yes |
Blanking function |
Yes |
7-segment display |
Yes |
Integral system diagnostics, status |
Yes |
Integral system diagnostics |
Yes |
Number of fail-safe digital outputs |
2 |
Number of beams |
4 |
Safety classification |
Standards |
EN ISO 13849-1 EN IEC 62061 |
Performance Level, up to |
e |
Category |
4 |
PFH value |
5.14 x 10⁻⁹ /h |
Safety Integrity Level (SIL), suitable for applications in |
3 |
Mission time |
20 Year(s) |
Safety type in accordance with IEC 61496-1 |
4 |
Mechanical data
Detection ability for test bodies at v = 1.6 m/s |
300 mm |
Height of the protection field |
900 mm |
Range, protection field, minimum |
4 m |
Range, protection field, maximum |
20 m |
Wave length of the laserdiode |
880 nm |
Mechanical data - Connection technique
Termination |
Connector |
Terminal connector, Recipient |
Connector plug M12, 8-pole |
Terminal, Connector, Transmitter |
Connector plug M12, 4-pole |
Mechanical data - Dimensions
Width of sensor |
100 mm |
Ambient conditions
Degree of protection |
IP66 |
Ambient temperature |
-25 ... +50 °C |
Storage and transport temperature |
-25 ... +70 °C |
Electrical data
Switching voltage OSSD, HIGH signal |
24 V |
Electrical data - Safety digital outputs
Output current, (fail-safe output), maximum |
0.25 A |
Design of control elements |
short-circuit proof, p-type |
Scope of delivery
Scope of delivery |
Kit with 2 mounting angles |
Accessory
Recommended safety switchgear |
SRB-E 301 |
Note
Note (General) |
Im In case of failure (interruption of the 0 V supply) the maximum leakage current is 1 mA. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
TÜV certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing basic component
EU-Konformitätserklärung |
Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Erklärung: | Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen. |
Bezeichnung des Bauteils: | Serie EX-SLC440 Serie EX-SLG440 |
Typ: | siehe Typenschlüssel |
Kennzeichnung: | D II 2G Ex db op is IIA T6 Gb D II 2D Ex op is tb IIIC T80°C Db |
Beschreibung des Bauteils: | Sicherheits-Lichtvorhang / -Lichtgitter |
Einschlägige Richtlinien: | Maschinenrichtlinie 1) | 2006/42/EG |
EMV-Richtlinie | 2014/30/EU | |
Explosionsschutzrichtlinie (ATEX) 2) | 2014/34/EU | |
RoHS-Richtlinie | 2011/65/EU |
Angewandte Normen: | EN 61496-1:2013 EN 61496-2:2013 ISO 13849-1:2015 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-28:2015 EN 60079-31:2014 |
Benannte Stelle für die Zertifizierung des QS-Systems nach Anhang IV, 2014/34/EU: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln Kenn-Nr.: 0035 |
Benannte Stelle der Baumusterprüfung: | 1) TÜV NORD CERT GmbH | 2) TÜV CYPRUS |
Langemarckstr. 20, 45141 Essen | Papaflessa 2, 2235 Latsia, Nicosia | |
Germany | Cyprus | |
Kenn-Nr.: 0044 | Kenn-Nr.: 2261 |
Baumusterprüfbescheinigung: | 1) 44 205 16019910 | 2) TÜV CY 22 ATEX 0206673 X |
Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
Ort und Datum der Ausstellung: | Wuppertal, 13. Januar 2023 |
Rechtsverbindliche Unterschrift Philip Schmersal Geschäftsführer |
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 02/05/2024, 22:28