schmersal_s_icon.png

EX-AZM 170-11ZRK-P-3GD

Item number: 103049429
EX-AZM 170-11ZRK-P-3GD

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

EX-AZM 170-(1)Z(2)K(3)-24VAC/DC-(4)-3G/D


(1)
111 NO contact/1 NC contact
022 NC contact

(2)
withoutLatching force 5 N
RLatching force 30 N

(3)
withoutPower to unlock
APower to lock

(4)
withoutManual release
1637Gold-plated contacts
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • IDC method of termination
  • Manual release
  • Explosion protection for ATEX Zones 2 and 22
  • 1 Cable entry M 20 x 1.5
  • Interlock with protection against incorrect locking.
  • High holding force
  • 90 mm x 84 mm x 30 mm

Ordering data

Article number (order number)

103049429
EAN (European Article Number)

4030661624518

Explosion protection

Explosion protection: regulations

EN IEC 60079-0

EN IEC 60079-15

EN 60079-31
Explosion protection zones

2

22
Explosion protection category

3G

3D
Explosion protection designation

D II 3G Ex nC IIB T5 Gc X

D II 3D Ex tc IIIC T80°C Dc X

Manufacturer declaration

ATEX Zone 2 and 22

General data

Standards

EN IEC 60947-5-1
Coding level according to EN ISO 14119

Low
Working principle

electromechanical
Housing material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing

General data - Features

Power to unlock

Yes
Manual release

Yes
Number of auxiliary contacts

1
Number of safety contacts

1

Safety classification

Standards

EN ISO 13849-1
Performance Level, up to

c
Category

1
B10D Normally-closed contact (NC)

2,000,000 Operations
Note

Electrical life on request.
B10D Normally-open contact (NO)

1,000,000 Operations
Mission time

20 Year(s)

Safety classification - Fault exclusion

Performance Level, up to

d
Category

3
Note

for 2-channel use and with suitable logic unit.
Mission time

20 Year(s)

Safety classification - Guard locking function

Performance Level, up to

e
Note (Performance Level)

Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.

Mechanical data

Mechanical life, minimum

1,000,000 Operations
Impact energy, maximum

7 J
Holding force

1,000 N
Latching force

30 N
Positive break travel

11 mm
Positive break force, minimum

8.5 N
Actuating speed, maximum

1 m/s
Mounting

Screws
Type of the screw head

Flat head screw
Tightening torque of the fastening screws for the housing cover, minimum

0.4 Nm
Tightening torque of the fastening screws for the housing cover, maximum

0.5 Nm
Tightening torque of the cable gland

4.5 Nm

Mechanical data - Connection technique

Termination

IDC method of termination
Cable cross-section of the cable glands, minimum

6.5 mm
Cable cross-section of the cable glands, maximum

12 mm
Cable section, minimum

2 x 1.0 mm², flexible
Cable section, maximum

1 x 1 mm², flexible
Allowed type of cable

solid single-wire

flexible

Mechanical data - Dimensions

Length of sensor

30 mm
Width of sensor

90 mm
Height of sensor

84 mm

Ambient conditions

Degree of protection

IP67
Ambient temperature

-15 ... +45 °C
Note (Relative humidity)

non-condensing

non-icing

Ambient conditions - Insulation values

Rated insulation voltage Ui

250 VAC
Rated impulse withstand voltage Uimp

4 kV

Electrical data

Thermal test current

2 A
Rated control voltage

24 VAC
Rated control voltage

24 VDC
Utilisation category AC-15

230 VAC
Utilisation category AC-15

2 A
Utilisation category DC-13

24 VDC
Utilisation category DC-13

2 A
Electrical power consumption, maximum

10 W
Switching element

NO contact, NC contact
Switching principle

Slow action
Maximum switching frequency

1,000 /h
Material of the contacts, electrical

Silver

Electrical data - Magnet control

Magnet switch-on time

100 %
Test pulse duration, maximum

5 ms
Test pulse interval, minimum

50 ms

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Including Ex-certified screwed cable gland and screw plug

Note

Note (General)

This type termination (IDC) method enables simple connetion of flexible conductors without the need for the use of conductor ferrules
Note (Manual release)

bottom

For manual release using M5 triangular key, available as accessory

Product picture (catalogue individual photo)

kazm1f04

ID: kazm1f04

| 620.3 kB | .jpg | 352.425 x 356.658 mm - 999 x 1011 px - 72 dpi

| 48.7 kB | .png | 74.083 x 74.789 mm - 210 x 212 px - 72 dpi

| 71.0 kB | .jpg | 122.061 x 123.472 mm - 346 x 350 px - 72 dpi

Dimensional drawing basic component

1azm1g03

ID: 1azm1g03

| 96.8 kB | .cdr |

| 3.7 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 75.8 kB | .jpg | 352.778 x 245.886 mm - 1000 x 697 px - 72 dpi

Switch travel diagram

kazm1s02

ID: kazm1s02

| 19.7 kB | .cdr |

| 2.0 kB | .png | 74.083 x 25.753 mm - 210 x 73 px - 72 dpi

| 50.1 kB | .jpg | 352.778 x 123.119 mm - 1000 x 349 px - 72 dpi

Diagram

kazm1k12

ID: kazm1k12

| 52.5 kB | .ai | 297 x 210.002 mm - 841 x 595 px - 72 dpi

| 45.9 kB | .jpg | 352.778 x 112.183 mm - 1000 x 318 px - 72 dpi

| 2.5 kB | .png | 74.083 x 23.636 mm - 210 x 67 px - 72 dpi

Assembly example

kazm1m06

ID: kazm1m06

| 98.4 kB | .cdr |

Operating principle

kazm1a70

ID: kazm1a70

| 213.5 kB | .jpg | 352.778 x 656.519 mm - 1000 x 1861 px - 72 dpi

| 6.5 kB | .png | 74.083 x 137.583 mm - 210 x 390 px - 72 dpi

EU Conformity Declaration
Pdf
EU-Konformitätserklärung LOG_COM_lo1de01s
Original



K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Erklärung:Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen.
Bezeichnung des Bauteils:EX-AZM170
EX-AZM170 I
Typ:siehe Typenschlüssel
Kennzeichnung:D II 3G Ex nC IIB T5 Gc
D II 3D Ex tc IIIC T80°C Dc
Beschreibung des Bauteils:Verriegelung mit elektromagnetischer Zuhaltung für Sicherheitsfunktionen
Einschlägige Richtlinien:Maschinenrichtlinie2006/42/EG
 EMV-Richtlinie2014/30/EU
 Explosionsschutzrichtlinie (ATEX)2014/34/EU
 RoHS-Richtlinie2011/65/EU
Angewandte Normen:EN 60947-5-1:2017
EN ISO 14119:2014
EN IEC 60079-0:2018
EN IEC 60079-15:2019
EN 60079-31:2014
Bevollmächtigter für die Zusammenstellung der technischen Unterlagen:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Ort und Datum der Ausstellung:Wuppertal, 10. Mai 2022
 GRA_SIG_ksig-y24
 Rechtsverbindliche Unterschrift
Philip Schmersal
Geschäftsführer

Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 2024-12-27, 11:26 p.m.