schmersal_s_icon.png

PS226-Z11-S200

Item number: 103015048
PS226-Z11-S200

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:
PS(2)-(3)-(4)-(5)-(6)-(7)-(8)-(9)-(10)-(11)-(12)

(1)
withoutnon-EX version
EXTypes of protection Ex d and t, to Zone 1/21
EXITypes of protection Ex i and t, up to Zone 1/21

(2)
215Metal enclosure
216Thermoplastic enclosure
226Plastic housing with 2 cable entries

(3)
LL-hole (standard)
elongated hole

(4)
Z11Snap action 1 NO contact / 1 NC contact
Z02Snap action 2 NC contacts
Z12Snap action 1 NO contact / 2 NC contact
Z11RSnap action 1 NO contact / 1 NC contact with latching
Z01RSnap action 1 NC contact with latching
Z02RSnap action 2 NC contacts with latching
T11Slow action 1 NO contact / 1 NC contact
T02Slow action 2 NC contacts
T20Slow action 2 NO contact
T12Slow action 1 NO contact / 2 NC contact
T21Slow action 2 NO contact / 1 NC contact
T03Slow action 3 NC contacts
T11UESlow action 1 NO contact / 1 NC contact with overlapping contacts
T02HSlow action 2 NC contacts with staggered contacts
T11KSlow action 1 NO contact + 1 NC contact - short-stroke
T10Slow action 1 NO contact
T02KSlow action 2 NO contacts short-stroke
T20HSlow action 2 NO contacts staggered

(5)
A1Contacts silver plated (Standard)
A2Gold contacts 0,3 μm
A3Gold contacts 1,0 μm
Gold contacts 3,0 μm

(6)
Gwithout indication light
integrated status display

(7)
M16Cable entry M20
STcable entry M16
STRConnector plug M12 - plastic - bottom
STLConnector plug M12, right
STMConnector plug M 12, left
Connector plug M12, metal

(8)
S200plunger S200 Ø 6 mm
S210Plunger Ø 8,6 mm
S211Plunger Ø 10,3 mm
S221Plunger Ø 9,8 mm
R200Roller plunger R200
R201Roller plunger - stainless steel roller Ø 9,5mm
R210Roller plunger - plastic roller Ø 12mm
K201Roller plunger - stainless steel roller - width 5,3 mm - Ø 12mm
K200Offset roller lever - plastic roller- width 5.3 mm - Ø 12 mm
K201Roller plunger - stainless steel roller - width 5,3 mm - Ø 12mm
K210Offset roller lever - plastic roller- width 5mm - Ø 14mm
K211Offset roller lever - stainless steel roller - width 5mm - Ø 14mm
K220Offset roller lever - plastic roller- width 7.6 mm - Ø 14 mm
K230Angle roller lever - plastic roller Ø 14 mm
K231Roller plunger - stainless steel roller Ø 14mm (Standard)
K240Angle roller lever with plastic roller Ø 22 mm - right-bent
K250Angle roller lever with plastic roller Ø 22 mm - left-bent
H200Roller lever - plastic roller Ø 16 m - lever length 24 mm
H202Roller lever - brass roller Ø 16mm - lever length 24mm (Standard)
H230Roller lever - plastic roller Ø 16mm - lever length 28 mm
H232Roller lever - brass roller Ø 16mm - lever length 28 mm
H236Roller lever - rubber roller Ø 16mm - lever length 28 mm
N200Roller lever 2 mm Toothing (24...26mm) - Plastic roller Ø 20 mm - Width 9.8 mm
N201Roller lever adjustable in 2 mm steps (24...66mm) - stainless steel roller Ø 20mm - width 9,8 mm
N202Roller lever - adjustable in 2 mm steps (24...66mm) - brass roller Ø 20mm - width 9,8 mm
N206Roller lever - adjustable in 2 mm steps (24...66mm) - rubber roller Ø 50mm - width 16 mm
N210Roller lever - adjustable in 2 mm steps (26...66 mm) - plastic roller Ø 20mm - width 4 mm - long- angled - locking washer
N280Roller lever -adjustable in 2 mm steps (24...66mm) - plastic roller Ø 20mm - width 5 mm - long - locking washer
J200Rod lever - plastic - 200mm -Ø 6mm
J201Rod lever - stainless steel - 200mm -Ø 6mm (Standard)
J203Rod lever - aluminium - 200mm -Ø 6mm
F230Spring rod - stainless steel - 150.4 mm
F231Spring rod - stainless steel - 70.2 mm
A200Special actuating bolt - plastic - valve control

(9)
U1no intent rotation (Standard)
U2intent rotation 45°
U3intent rotation 90°
U4intent rotation 135°
U5intent rotation 180°
U6intent rotation 225°
U7intent rotation 275°
intent rotation 315°

(10)
X1no lever rotation (Standard)
X2lever rotation 15°
X3lever rotation 30°
X4lever rotation 45°
X5lever rotation 60°
X6lever rotation 75°
X7lever rotation 90°
X8lever rotation 105°
X9lever rotation 120°
X10lever rotation 135°
X11lever rotation 150°
X12lever rotation 165°
X13lever rotation 180°
X14lever rotation 195°
X15lever rotation 210°
X16lever rotation 225°
X17lever rotation 240°
X18lever rotation 255°
X19lever rotation 270°
X20lever rotation 285°
X21lever rotation 300°
X22lever rotation 315°
X23lever rotation 330°
lever rotation 345°

(11)
IRoller outside (Standard)
Roller inside

(12)
T-30...+80°C (Standard)
-40...+80°C

(13)
Speze-9990

(14)
withoutZone 2 and 22
3GDZone 2 and 22
2DZone 21
3DZone 22
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • Quick connection technology as connection terminals rotated by 45°
  • cable entry 1 x M20 x 1,5
  • thermoplastic enclosure with foldable latching cover
  • Simple and quick to adjust the control elements by 45°.
  • cable entry 2 x M20 x 1,5
  • Design to EN 50047
  • Tappet width Ø 8.6 mm
  • LED version available

Ordering data

Product type description

PS226-Z11-S200
Article number (order number)

103015048
EAN (European Article Number)

4030661501062
eCl@ss number, version 12.0

27-27-26-01
eCl@ss number, version 11.0

27-27-26-01
eCl@ss number, version 9.0

27-27-26-01
ETIM number, version 7.0

EC000030
ETIM number, version 6.0

EC000030

Approvals - Standards

Certificates

cULus

CCC

General data

Standards

EN IEC 60947-5-1
Housing construction form

Norm construction design
Actuator type to EN 50047

B
Housing material

Plastic, glass-fibre-reinforced
Plunger material

Plastic
Gross weight

80 g

General data - Features

Safety functions

Yes
Number of auxiliary contacts

1
Number of safety contacts

1

Safety classification

Standards

EN ISO 13849-1
B10D Normally-closed contact (NC)

20,000,000 Operations
Mission time

20 Year(s)

Mechanical data

Actuating element

plunger S200
Mechanical life, minimum

10,000,000 Operations
Positive break force, minimum

40 N
Actuating speed, minimum

10 mm/min
Actuating speed, maximum

0.5 m/s
Tightening torque of the fixing screws

1.2 Nm

Mechanical data - Connection technique

Termination

Screw terminals M20 x 1.5
Cable section, minimum

0.34 mm²
Cable section, maximum

1.5 mm²
Tightening torque of electrical connection, minimum

0.6 Nm
Tightening torque of electrical connection, maximum

0.8 Nm
Note (Cable entry)

Settle length of the conductor: 5...6mm

Mechanical data - Dimensions

Length of sensor

33 mm
Width of sensor

59 mm
Height of sensor

56.2 mm

Ambient conditions

Degree of protection

IP66

IP67
Ambient temperature

-30 ... +80 °C
Protection class

II

Ambient conditions - Insulation values

Rated insulation voltage Ui

250 VAC
Rated impulse withstand voltage Uimp

4 kV
Degree of pollution

3

Electrical data

Thermal test current

10 A
Required rated short-circuit current

400 A
Utilisation category AC-15

240 VAC
Utilisation category AC-15

3 A
Utilisation category DC-13

24 VDC
Utilisation category DC-13

3 A
Switching element

1 NO contact, 1 NC contacts
Switching principle

Snap action
Maximum switching frequency

5,000 /h
Material of the contacts, electrical

Silver

Language filter

If a document is not available in the chosen language, the English version will be used by default.

Datasheet

Chinese (11/22/2024)
Danish (11/22/2024)
Dutch (11/22/2024)
English (11/22/2024)
Finnish (11/22/2024)
French (11/22/2024)
German (11/22/2024)
Italian (11/22/2024)
Japanese (11/22/2024)
Norwegian (11/22/2024)
Polish (11/22/2024)
Portugese (11/22/2024)
Portugese (11/22/2024)
Spanish (11/22/2024)
Swedish (11/22/2024)
Turkish (11/22/2024)

Operating instructions and Declaration of conformity

PS215 / PS216 / PS226 (652.9 kB, 02/19/2024)
PS215 / PS216 / PS226 (650.6 kB, 02/19/2024)
PS215 / PS216 / PS226 (660.6 kB, 04/08/2024)
PS215 / PS216 / PS226 (662.2 kB, 04/08/2024)
PS215 / PS216 / PS226 (648.1 kB, 04/09/2024)
PS215 / PS216 / PS226 (657.5 kB, 04/09/2024)
PS215 / PS216 / PS226 (718.5 kB, 05/13/2024)
PS215 / PS216 / PS226 (640.4 kB, 08/16/2024)

UL Certificate

TQ/ZQ/PS215 / PS216 / PS226 / TQ/ZQ/PS315 / PS316 (351.0 kB, 06/06/2024)

CCC certification

PS116-... (2.9 MB, 10/24/2024)
PS116-... (1.8 MB, 10/24/2024)

Brochure

$missingName$ (3.5 MB, 05/10/2019, Revision 01)
Detección de la posición con sistema (3.4 MB, 05/10/2019, Revision 01)
Détection de position avec système (3.3 MB, 05/10/2019, Revision 01)
Rilevamento di posizione con sistema (3.3 MB, 05/10/2019, Revision 01)
System detekcji pozycji (3.4 MB, 05/10/2019, Revision 01)
Detecção de posição com sistema (3.3 MB, 05/10/2019, Revision 01)
Position detection with system (3.7 MB, 02/26/2020)
Positionserfassung mit System (4.1 MB, 11/07/2024)
Position detection with system (4.1 MB, 11/07/2024)

SISTEMA-VDMA library

(662.3 kB, 08/04/2023)
(659.3 kB, 08/04/2023)

Download the latest version of Adobe Reader

Adobe Reader

Product picture (catalogue individual photo)

kps2sf03

ID: kps2sf03

| 689.7 kB | .jpg | 352.425 x 396.522 mm - 999 x 1124 px - 72 dpi

| 40.7 kB | .png | 74.083 x 83.256 mm - 210 x 236 px - 72 dpi

| 57.4 kB | .jpg | 109.714 x 123.472 mm - 311 x 350 px - 72 dpi

Dimensional drawing basic component

kps2xg04

ID: kps2xg04

| 6.5 kB | .png | 74.083 x 63.853 mm - 210 x 181 px - 72 dpi

| 161.6 kB | .jpg | 352.778 x 304.447 mm - 1000 x 863 px - 72 dpi

Dimensional drawing actuator

kps2-b01

ID: kps2-b01

| 118.2 kB | .jpg | 352.778 x 281.164 mm - 1000 x 797 px - 72 dpi

| 5.5 kB | .png | 74.083 x 58.914 mm - 210 x 167 px - 72 dpi

Switch travel diagram

kps11s01

ID: kps11s01

| 2.2 kB | .png | 74.083 x 41.628 mm - 210 x 118 px - 72 dpi

| 69.9 kB | .jpg | 352.778 x 198.261 mm - 1000 x 562 px - 72 dpi

Diagram

kps2xk01

ID: kps2xk01

| 58.0 kB | .jpg | 352.778 x 111.478 mm - 1000 x 316 px - 72 dpi

| 2.7 kB | .png | 74.083 x 23.283 mm - 210 x 66 px - 72 dpi

Video ID: Positionsschalter-PS

Position switches series PS (Vimeo)


EU Declaration of Conformity LOG_COM_lo1de01s
Original



K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Declaration:We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.
Name of the component:PS116,
PS215, PS216, PS226,
PS315, PS316
Type:See ordering code
Description of the component:Position switch
Relevant Directives:Low Voltage Directive2014/35/EU
 RoHS-Directive2011/65/EU
Applied standards:EN 60947-5-1:2017
Person authorised for the compilation of the technical documentation:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Place and date of issue:Wuppertal, March 3, 2021
 GRA_SIG_ksig-y24
 Authorised signature
Philip Schmersal
Managing Director
UK Declaration of Conformity LOG_COM_lo1de01s
Company:K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Declaration:We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.
Name of the component:PS116,
PS215, PS216, PS226,
PS315, PS316
Type:See ordering code
Description of the component:Position switches
Relevant legislation:Electrical Equipment (Safety) Regulations2016
 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations2012
Designated standards:EN 60947-5-1:2017
UK-Importer /
Person authorised for the compilation of the technical documentation:


Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL
Place and date of issue:Wuppertal, August 19, 2021
 GRA_SIG_ksig-y24
 Authorised signature
Philip Schmersal
Managing Director

Schmersal Canada Ltd., 29 Centennial Road, Unit 1, Orangeville, Ontario L9W 1R1 Canada

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 2024-11-22, 11:24 a.m.