.png?id=4b3ac43987d949cdc69fc958aa708ca2){kind=logo}
RSS260-I2-SD-ST
RSS260-I2-SD-ST
| Product type description: RSS260-(1)-(2)-(3)-(4)-(5) |
| (1) | |
| without | Standard coding |
| I1 | Individual coding |
| I2 | Individual coding, multiple teaching |
| (2) | |
| D | With diagnostic output |
| SD | With serial diagnostic function 1) |
| (3) | |
| without | Standard version without feedback circuit monitoring EDM (External Device Monitoring) |
| F0 | EDM with automatic reset 1) |
| F1 | EDM with manual reset 1) |
| (4) | |
| without | Without EMERGENCY STOP |
| Q | Acknowledge input error with EMERGENCY STOP 1) |
| (5) | |
| without | Connecting cable (lenght in m) |
| ST | Connector plug M8, 8-pole |
| LSTM12-8-0,25M | Cable 0.25 m long with connector M12, 8-pole |
| LSTM8-8-0,1M | Cable 0.1 m long with connector M8, 8-pole |
| LSTM12-5-0.25M | Cable 0.25 m long with connector M12, 5-pole |
| (*) | |
| 1) | only for versions -ST, -LSTM12-8-0.25M and -LSTM8-8-0.1M |
- Repeated individual coding with RFID technology
- Coding level "High" according to ISO 14119
- 1 x connector plug M8
- Frontal and lateral actuation enabled
- Max. 31 sensors can be wired in series.
- Thermoplastic enclosure
- Simple mounting without additional angle
- RFID-technology for needs-based protection against tampering
Ordering data
| Product type description |
RSS260-I2-SD-ST |
| Article number (order number) |
103003603 |
| EAN (European Article Number) |
4030661436463 |
| eCl@ss number, version 12.0 |
27-27-46-01 |
| eCl@ss number, version 11.0 |
27-27-24-03 |
| eCl@ss number, version 9.0 |
27-27-24-03 |
| ETIM number, version 7.0 |
EC001829 |
| ETIM number, version 6.0 |
EC001829 |
Approvals - Standards
|
TÜV cULus FCC IC UKCA ANATEL |
General data
| Standards |
EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Coding |
Individual coding, multiple teaching |
| Coding level according to EN ISO 14119 |
High |
| Working principle |
RFID |
| Frequency band RFID |
125 kHz |
| Transmitter output RFID, maximum |
-6 dB/m |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
not flush |
| Sensor topology |
Sensor for series wiring |
| Housing material |
Plastic, thermoplastic, self-extinguishing |
| Active area |
Glass-fibre, thermoplastic |
| Reaction time, maximum |
100 ms |
| Duration of risk, maximum |
200 ms |
| Reaction time, switching off safety outputs via actuator, maximum |
100 ms |
| Gross weight |
60 g |
General data - Features
| Serial diagnostics |
Yes |
| Short circuit detection |
Yes |
| Cross-circuit detection |
Yes |
| Series-wiring |
Yes |
| Safety functions |
Yes |
| Cascadable |
Yes |
| Integral system diagnostics, status |
Yes |
| Number of LEDs |
3 |
| Number of poles |
8 |
| Number of fail-safe digital outputs |
2 |
| Number of series-wiring of sensors |
31 |
| Safety classification |
| Standards |
EN ISO 13849-1 EN IEC 61508 |
| Performance Level, up to |
e |
| Category |
4 |
| PFH value |
6.80 x 10⁻¹⁰ /h |
| PFD value |
1.20 x 10⁻⁴ |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| Mission time |
20 Year(s) |
Mechanical data
| Actuating panels |
lateral front side |
| Active area |
lateral front |
| Mounting |
A 20 mm screw length usually suffices to mount the sensor. When the mounting plates are used, we recommend 25 mm long screws. |
| Type of the fixing screws |
2x M4 |
| Tightening torque of the fixing screws, maximum |
0.8 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Typical switching distance, frontal |
12 mm |
| Typical switching distance, lateral |
9 mm |
| Assured switching distance "ON", frontal |
10 mm |
| Assured switching distance "OFF", frontal |
18 mm |
| Assured switching distance "ON", lateral |
6 mm |
| Assured switching distance "OFF", lateral |
15 mm |
| Note (Sao) |
The specifications of the safety switching distance Sao refer to a temperature range of |
| Note (switching distance) |
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
| Hysteresis (Switching distance), maximum |
2 mm |
| Repeat accuracy R |
0.5 mm |
| Note (Repeat accuracy R) |
Axial offset: The long side allows for a maximum height misalignment (x) of sensor and actuator of 8 mm (e.g. mounting tolerance or due to guard door sagging). The axial misalignment (y) is max. ± 18 mm (see figure: Operating principle).Minimum clearance between two sensor systems 100 mm |
Mechanical data - Connection technique
| Note (length of the sensor chain) |
Cable length and cross-section change the voltage drop dependiing on the output current |
| Note (series-wiring) |
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD |
| Termination |
Connector M8, 8-pole |
Mechanical data - Dimensions
| Length of sensor |
29.5 mm |
| Width of sensor |
39.2 mm |
| Height of sensor |
18 mm |
Ambient conditions
| Degree of protection |
IP65 IP67 |
| Ambient temperature |
-28 ... +65 °C |
| Storage and transport temperature |
-28 ... +85 °C |
| Relative humidity, maximum |
93 % |
| Note (Relative humidity) |
non-condensing non-icing |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Permissible installation altitude above sea level, maximum |
2,000 m |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
32 VDC |
| Rated impulse withstand voltage Uimp |
0.8 kV |
| Overvoltage category |
III |
| Degree of pollution |
3 |
Electrical data
| Operating voltage |
24 VDC -15 % / +10 % (stabilised PELV power supply) |
| Operating current, minimum |
0.5 mA |
| No-load supply current I0, typical |
35 mA |
| Rated operating voltage |
24 VDC |
| Operating current |
600 mA |
| Required rated short-circuit current |
100 A |
| Time to readiness, maximum |
2,000 ms |
| Switching frequency, maximum |
1 Hz |
| Electrical fuse rating, maximum |
2 A |
Electrical data - Safety digital inputs
| Designation, Safety inputs |
X1 and X2 |
| Current consumption of the safety inputs |
5 mA |
| Test pulse duration, maximum |
1 ms |
| Test pulse interval, minimum |
100 ms |
| Classification ZVEI CB24I, Sink |
C1 |
| Classification ZVEI CB24I, Source |
C1 C2 C3 |
Electrical data - Safety digital outputs
| Designation, Safety outputs |
Y1 and Y2 |
| Rated operating current (safety outputs) |
250 mA |
| Output current, (fail-safe output), maximum |
0.25 A |
| Design of control elements |
short-circuit proof, p-type |
| Voltage drop Ud, maximum |
1 V |
| Leakage current Ir, maximum |
0.5 mA |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Current, Utilisation category DC-12 |
0.25 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
0.25 A |
| Test pulse interval, typical |
1000 ms |
| Test pulse duration, maximum |
1 ms |
| Classification ZVEI CB24I, Source |
C2 |
| Classification ZVEI CB24I, Sink |
C1 C2 |
Electrical data - Serial diagnostic SD
| Designation, Serial diagnostic SD |
OUT |
| Operation current |
150 mA |
| Design of control elements |
short-circuit proof |
| Wiring capacitance |
50 nF |
Electrical data - Electromagnetic compatibility (EMC)
| Interfering radiation |
IEC 61000-6-4 |
Status indication
| Note (LED switching conditions display) |
(1) LED green: Supply voltage LED yellow: Operating condition LED red: Fault |
Pin assignment
| PIN 1 |
A1 Ue: White |
| PIN 2 |
X1 safety input 1: Brown |
| PIN 3 |
A2 GND: Green |
| PIN 4 |
Y1 safety output 1: Yellow |
| PIN 5 |
serial diagnostic output OUT Grey |
| PIN 6 |
X2 safety input 2: Pink |
| PIN 7 |
Y2 safety output 2: Blue |
| PIN 8 |
IN serial diagnostic input Pink |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
RST16-1 RST-U-2 RST260-1 |
| Recommended safety switchgear |
PROTECT PSC1 SRB-E-301ST SRB-E-201LC |
Note
| Note (General) |
Evaluation requirements: dual-channel safety input, suitable for p-type sensors with NO function. The safety-monitoring module must tolerate internal functional tests of the sensors with cyclic switch-off of the sensor outputs for max. 0.5 ms. Short-circuit recognition by the evaluation is not necessary. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
ANATEL certification
UL Certificate
FCC-Zertifikat
IC-Zertifikat
UKCA certificate
Brochure
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Contact arrangement
Video ID: RSS-260-01
Basic function (Vimeo)
Video ID: RSS-260-02
Variable mounting options (Vimeo)
Video ID: RSS-260-03
Single device connection (Vimeo)
Video ID: RSS-260-04
Series connection with serial diagnostics (Vimeo)
Video ID: RSS-260-05
Cross-fault with controlled shut-down process (Vimeo)
Video ID: RSS-260-06
Tolerance to misalignment (Vimeo)
Video ID: RSS-260-07
Warning when actuator is in limit range (Vimeo)
Video ID: RSS-260-08
Teaching process for individual coding: RSS260-I (Vimeo)
Video ID: RSS-260-10
Teaching of a replacement actuator to RSS260-I2 (Vimeo)
Video ID: RSS-260-11
RST-16-1 actuator on flat contour safety guards (Vimeo)
Video ID: RSS-260-12
RST-U-2 actuator for confined spaces (Vimeo)
Video ID: RSS260-13
Produktinformation RSS260 (Vimeo)
Video ID: SD-Interface-Mr-Safety
103009970 SRB-E-201LC
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 2 Safety outputs 2 A
- 1 Signalling output
103009973 SRB-E-204ST
- Plug-in screw terminals with coding
- STOP 0 Function
- Monitoring of 4 sensors
- Start button / Auto-start
- 2 Safety outputs
- 4 Signalling outputs
103007672 SRB-E-301ST
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 1 Auxiliary contact
- 3 safety contacts
103004318 RST260-1
- Actuation from side
- Simple mounting
- Mounting 2 x M4
103004336 RST16-1
- Frontal actuation from assembly direction
- Flat design
- Mounting 2 x M5
103005994 RST-U-2
- Frontal actuation from assembly direction
- small body
- Mounting 1 x M3 plus Twist protection
103055438 ACC-DHS-U1-INS-RST-U-2
- Actuator insert
- Incl. RST-U-2 actuator and attachment screw
- For use of the DHS-U1 in conjunction with safety sensor RSS260
103003640 A-K8P-M8-S-G-10M-BK-2-X-A-4
- Pre-wired cable
- 8-pole
103003639 A-K8P-M8-S-G-5M-BK-2-X-A-4
- Pre-wired cable
- 8-pole
103003642 A-K8P-M8-S-W-5M-BK-2-X-A-4
- Pre-wired cable
- 8-pole
103003638 A-K8P-M8-S-G-2M-BK-2-X-A-4
- Pre-wired cable
- 8-pole
103043263 A-K8P-M8-S-W-2M-BK-2-X-A-4 (V2)
- Pre-wired cable
- 8-pole
103043265 A-K8P-M8-S-W-10M-BK-2-X-A-4 (V2)
- Pre-wired cable
- 8-pole
101209414 CSS-Y-A-8P
- Accessories for series-wiring with serial diagnostics
- The connector supplies the safety channels with operating voltage.
103008718 CSS-Y-A-8P-VA
- Accessories for series-wiring with serial diagnostics
- The connector supplies the safety channels with operating voltage.
103009361 SD-Y-POWER
- Accessories for series-wiring with serial diagnostics
103009362 SD-Y-POWER VA
- Accessories for series-wiring with serial diagnostics
101190026 CSS-T
- Accessories for series-wiring with serial diagnostics
- for Sensors
101190025 CSS-T-A
- Accessories for series-wiring with serial diagnostics
- for CSS 34
101209416 CSS-Y-8P
- Accessories for series-wiring with serial diagnostics
103008717 CSS-Y-8P-VA
- Accessories for series-wiring with serial diagnostics
103053675 DHS-U1-BKWH
- Without electrical connection
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
- For left or right hinged safety guards
103053688 DHS-U1-BKWH-L5-5.00-LT
- With illuminated pushbutton
- Connecting cable, 5-core, 5 m
- Protection class IP65 / IP67
- Machine status directly recognisable on the door handle
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
- For left or right hinged safety guards
103053692 DHS-U1-BKWH-L5-5.00-RGB
- Connecting cable, 5-core, 5 m
- Degree of protection IP65 / IP67
- Machine status directly recognisable on the door handle
- With door handle lighting
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
- For left or right hinged safety guards
103053689 DHS-U1-BKWH-L8-5.00-RGB-LT
- For left or right hinged safety guards
- With door handle lighting and illuminated push-button
- Connecting cable, 8-core, 5 m
- Protection class IP65 / IP67
- Machine status directly recognisable on the door handle
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
103053676 DHS-U1-BKWH-LST5-0.25-LT
- With illuminated pushbutton
- Connecting cable with connector M12, 5-pole, 0.25 m
- Protection class IP65 / IP67
- Machine status directly recognisable on the door handle
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
- For left or right hinged safety guards
103053691 DHS-U1-BKWH-LST5-0.25-RGB
- With door handle lighting
- Connecting cable with connector M12, 5-pole, 0.25 m
- Degree of protection IP65 / IP67
- Machine status directly recognisable on the door handle
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
- For left or right hinged safety guards
103053677 DHS-U1-BKWH-LST8-0.25-RGB-LT
- With door handle lighting and illuminated push-button
- Connecting cable with connector M12, 8-pole, 0.25 m
- Protection class IP65 / IP67
- Machine status directly recognisable on the door handle
- Door handle in an ergonomical design
- Can be combined with solenoid interlock AZM40 or safety sensor RSS260
- Can also be used without safety switchgear device
- For left or right hinged safety guards
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | RSS260 |
| Type: | See ordering code |
| Description of the component: | Non-contact safety sensor |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| RED-Directive | 2014/53/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-3:2013 ISO 14119:2013 EN 300 330 V2.1.1:2017 EN ISO 13849-1:2015 EN 61508 parts 1-7:2010 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015 |
| Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| EC-Type Examination Certificate: | 01/205/5348.03/20 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, January 21, 2020 |
 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | RSS260 |
| Type: | See ordering code |
| Description of the component: | Non-contact safety sensor |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Radio Equipment Regulations | 2017 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-3:2013 EN 300 330 V2.1.1:2017 EN ISO 14119:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
| Approved body for Type Examination: | TÜV Rheinland UK Ltd. 1011 Stratford Road Solihull, B90 4BN ID: 2571 |
| Type examination certificate: | 01/205U/5348.00/22 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, November 2, 2022 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal Ltd., Sparrowhawk Close, WR14 1GL Malvern
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 23/12/2024, 00:48