.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
IFL 20-333-10/01K-1847
IFL 20-333-10/01K-1847
Downloads
| Product type description: IFL (1)-(2)-(3)(4)(5)(6) |
| (1) | |
| 15 | Switching distance 15 mm |
| 20 | Switching distance 20 mm |
| (2) | |
| 333 | Square design, 112 x 40 x 40 mm |
| (3) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (4) | |
| without | Cable |
| D | DC 2-wire |
| A | Alternating current/direct current AC/DC |
| (5) | |
| Y | Protection class IP65 |
| Z | Protection class IP67 |
| (6) | |
| N | n-type |
| P | p-type |
- Design 333
Ordering data
| Product type description |
IFL 20-333-10/01K-1847 |
| Article number (order number) |
101096600 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Block |
| Installation conditions (mechanical) |
not flush |
| Note (Installation condition) |
On request: Short-circuit and overload-proof. |
| Housing material |
Plastic |
| Active area |
Plastic |
| Material of the housing cover |
Luran |
| Gross weight |
160 g |
General data - Features
| Integral system diagnostics, status |
Yes |
Mechanical data - Switching distances
| Nominal switching distance Sn |
20 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, maximum |
2 x 1.5 mm² |
Mechanical data - Dimensions
| Length of sensor |
112 mm |
| Width of sensor |
40 mm |
| Height of sensor |
40 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Ambient conditions - Insulation values
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Rated supply frequency, minimum |
45 Hz |
| Rated supply frequency, maximum |
65 Hz |
| Type of voltage range |
AC |
| Operating current, minimum |
10 mA |
| Operating current |
150 mA |
| Switching element |
NO contact or NC contact |
| Protection circuit integrated |
inductive interference protection |
| Switching frequency, approx. |
10 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
7.5 V |
| Current at Voltage drop Ud |
0.5 A |
| Design of control elements |
Two-wire |
| Current leakage Ir, maximum |
1 mA |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Programmable by repositioning the plug-in jumper at the terminal screws |
Language filter
Datasheet
Mounting and wiring instructions
EC Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 16/07/2025, 10:55