.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M
SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M
Downloads
| Product type description: SE-P40 (1)-(2)-(3) |
| (1) | |
| without | Uncoated profile |
| C | Coated profile |
| (2) | |
| without | Material: EPDM, 65 Shore A |
| NBR | Material: Perbunan® NBR |
| (3) | |
| 1250 | Length 1250 mm |
| 2500 | Length 2500 mm |
| 5000 | Length 5000 mm (for uncoated profile only) |
| 10000 | Length 10000 mm (for uncoated profile only) |
- Dirt and moisture in the profile are to a great extent compensated
- Insensitive to environmental conditions
- approx. 40 mm high (including aluminum profile)
Ordering data
| Product type description |
SE-P40-NBR 2500 PACK. RUBBER PROF. 2.5 M |
| Article number (order number) |
101174454 |
| EAN (European Article Number) |
4030661303734 |
| eCl@ss number, version 12.0 |
27-27-34-01 |
| eCl@ss number, version 11.0 |
27-27-34-01 |
| eCl@ss number, version 9.0 |
27-27-34-01 |
| ETIM number, version 7.0 |
EC002887 |
| ETIM number, version 6.0 |
EC002887 |
| Note (Ordering data) |
A switch strip system is assembled from individual components. The components must be ordered separately. Example: |
General data
| Standards |
EN ISO 13850 |
| Material of the rubber profile |
NBR Perbunan® |
| Gross weight |
880 g |
Mechanical data
| Mechanical life, minimum |
20,000,000 Operations |
Mechanical data - Dimensions
| Length |
2,500 mm |
| Width |
25 mm |
| Width, minimum |
400 mm |
| Width, maximum |
10,000 mm |
| Height, approx. |
38 mm |
Ambient conditions
| Degree of protection |
IP67 |
Note
| Note (General) |
In the extremities of the safety edge at approx. 60 mm (SE 40) or 50 mm (SE 70) finger guard is not guaranteed. Upon actuation of this area, the transmitter/receiver is pushed into the lower profile section and the switching signal is evaluated, but the required forces are high though. If this restriction is not acceptable for the specific application, constructive measures must be taken. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
Mounting and wiring instructions
Force-travel diagram
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing basic component
101165883 SE-304 C EVALUATION UNIT
- To monitor 1 ... 4 safety edge(s)
- 1 safety contact, STOP 0
- 1 Signalling output
101153919 SE-100 C EVALUATION UNIT
- To monitor 1 ... 2 safety edge(s)
- 1 safety contact, STOP 0
- 1 Signalling output
101153920 SE-400 C EVALUATION UNIT
- To monitor 1 safety edge(s)
- 2 safety contacts, STOP 0
- 1 Signalling output
101153893 SE-AL10-1250 PACKED ALU. RAIL
- Aluminium profile without aluminium leg
- for Rubber profile SE-P40
101172179 SE-AL10-2500 PACKED ALU. RAIL
- Aluminium profile without aluminium leg
- for Rubber profile SE-P40
101153894 SE-AL12-1250 PACKED ALU. RAIL
- Aluminium profile with aluminium leg
- for Rubber profile SE-P40
101172180 SE-AL12-2500 PACKED ALU. RAIL
- Aluminium profile with aluminium leg
- for Rubber profile SE-P40
101181969 SE-SET VER.2.0 10.5M/20M SENSOR SET
- Transmitter + receiver
101179373 SE-SET VER.2.0 3M/10.5M SENSOR SET
- Transmitter + receiver
101179375 SE-SET VER.2.0 SENSOR SET
- Transmitter + receiver
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 28/12/2024, 06:42