.png?id=bb44e9061d048e5250879d3fc4285be0){kind=logo}
SE-P70-10000 PACKED RUBBER PROFILE 10 M
SE-P70-10000 PACKED RUBBER PROFILE 10 M
Downloads
| Product type description: SE-P70 (1)-(2)-(3) |
| (1) | |
| without | Uncoated profile |
| C | Coated profile |
| (2) | |
| without | Material: EPDM, 65 Shore A |
| NBR | Material: Perbunan® NBR |
| (3) | |
| 1250 | Length 1250 mm |
| 2500 | Length 2500 mm |
| 5000 | Length 5000 mm (for uncoated profile only) |
| 10000 | Length 10000 mm (for uncoated profile only) |
- Dirt and moisture in the profile are to a great extent compensated
- Insensitive to environmental conditions
- approx. 70 mm high (including aluminum profile)
Ordering data
| Product type description |
SE-P70-10000 PACKED RUBBER PROFILE 10 M |
| Article number (order number) |
101172165 |
| EAN (European Article Number) |
4030661300221 |
| eCl@ss number, version 12.0 |
27-27-34-01 |
| eCl@ss number, version 11.0 |
27-27-34-01 |
| eCl@ss number, version 9.0 |
27-27-34-01 |
| ETIM number, version 7.0 |
EC002887 |
| ETIM number, version 6.0 |
EC002887 |
| Note (Ordering data) |
A switch strip system is assembled from individual components. The components must be ordered separately. Example: |
General data
| Standards |
EN ISO 13850 |
| Resistance against permanent deformation |
Good |
| Material resistance (acids) |
Good |
| Material of the rubber profile |
EPDM, 65 Shore A |
| Note (Material of the rubber profile) |
International abbreviation: EPDM, 65 Shore A Chemical name : Ethylene-propylene terpolymer |
| Gross weight |
6,800 g |
Mechanical data
| Mechanical life, minimum |
20,000,000 Operations |
Mechanical data - Dimensions
| Length |
10,000 mm |
| Width |
30 mm |
| Width, minimum |
400 mm |
| Width, maximum |
10,000 mm |
| Height, approx. |
70 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Material temperature resistance (short-term) |
-50 ... +170 °C |
| Material temperature resistance (long-term) |
-30 ... +140 °C |
Note
| Note (General) |
If a higher resistance is required, choose safety edge profiles with 20 µm plastic coating. The coating must be submitted to low mechanical loads only. |
Notes - Chemical resistance
| Material resistance (fuel) |
Low |
| Material resistance (solvents) |
low to satisfactory |
| Material resistance (oil) |
Low |
| Material resistance (ozone) |
Excellent |
| Material resistance, (rebound elasticity at 20 C) |
Good |
| Material resistance (weather) |
Excellent |
Language filter
Datasheet
Operating instructions and Declaration of conformity
Mounting and wiring instructions
Force-travel diagram
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
101153920 SE-400 C EVALUATION UNIT
- To monitor 1 safety edge(s)
- 2 safety contacts, STOP 0
- 1 Signalling output
101165883 SE-304 C EVALUATION UNIT
- To monitor 1 ... 4 safety edge(s)
- 1 safety contact, STOP 0
- 1 Signalling output
101153919 SE-100 C EVALUATION UNIT
- To monitor 1 ... 2 safety edge(s)
- 1 safety contact, STOP 0
- 1 Signalling output
101181969 SE-SET VER.2.0 10.5M/20M SENSOR SET
- Transmitter + receiver
101179373 SE-SET VER.2.0 3M/10.5M SENSOR SET
- Transmitter + receiver
101179375 SE-SET VER.2.0 SENSOR SET
- Transmitter + receiver
101153895 SE-AL20-1250 PACKED ALU. RAIL
- Aluminium profile without aluminium leg
- for Rubber profile SE-P70
101172186 SE-AL20-2500 PACKED ALU. RAIL
- Aluminium profile without aluminium leg
- for Rubber profile SE-P70
101153896 SE-AL22-1250 PACKED ALU. RAIL
- Aluminium profile with aluminium leg
- for Rubber profile SE-P70
101172188 SE-AL22-2500 PACKED ALU. RAIL
- Aluminium profile with aluminium leg
- for Rubber profile SE-P70
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 18/11/2024, 13:38