AZ216-T12R-ST
- 小型
- 折りたたみ式ラッチカバー付き熱可塑性樹脂ハウジング
- アクチュエータ・ヘッドは4×90°で回転可
注文データ
Product type description |
AZ216-T12R-ST |
部品番号(注文番号) |
103053361 |
EAN(欧州部品番号) |
4030661634432 |
eCl@ss number, version 12.0 |
27-27-06-10 |
eCl@ss number, version 11.0 |
27-27-06-10 |
eCl@ss番号、バージョン9.0 |
27-27-06-10 |
ETIM number, version 7.0 |
EC002592 |
ETIM number, version 6.0 |
EC002592 |
認証
|
cULus CCC |
一般データ
規格 |
EN ISO 13849-1 EN ISO 14119 EN IEC 60947-5-1 |
Coding level according to EN ISO 14119 |
Low |
アクティブ原理 |
電気機械式 |
ハウジング 材質 |
樹脂、グラスファイバー強化熱可塑性樹脂、自己消火性 |
総重量 |
154 g |
一般データ - 仕様
補助接点数 |
1 |
極数 |
8 |
安全接点数 |
2 |
ケーブルグラントの数 |
1 |
安全性評価
規格 |
EN ISO 13849-1 |
Performance Level, up to |
c |
EN ISO 13849に準拠したカテゴリー |
1 |
B10D Normally-closed contact (NC) |
2,000,000 操作 |
B10D Normally-open contact (NO) |
1,000,000 操作 |
Note |
at 10% Ie and ohmic load |
Mission time |
20 年 |
安全性評価 - 障害の除外
Please note: |
Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed. |
Performance Level, up to |
d |
Category |
3 |
Note |
for 2-channel use and with suitable logic unit. |
機械的データ
機械的寿命、最小 |
1,000,000 操作 |
ラッチ力 |
30 N |
強制開離距離 |
5 mm |
Positive break force per NC contact, minimum |
10 N |
強制開離力、最小 |
10 N |
作動速度, 最大 |
0.2 m/s |
取り付け |
ネジ |
Type of the fixing screws |
2x M4 |
Tightening torque of the fixing screws |
1.2 Nm |
機械的データ - 電気機械式
Termination |
Connector plug M12 |
ケーブル引込口 |
1 x M20 x 1,5 |
端子 コネクター |
ネジ端子 |
ケーブル断面積、最小 |
0.34 mm² |
ケーブル断面積, 最大 |
1.5 mm² |
Note |
All indications including the conductor ferrules. |
Tightening torque of electrical connection, minimum |
0.6 Nm |
Tightening torque of electrical connection, maximum |
0.8 Nm |
Note (Cable entry) |
Settle length of the conductor: 5...6mm |
Mechanical data - connector side A
Connector coding |
A |
機械的データ - 寸法
センサー長 |
32.7 mm |
センサーの幅 |
31 mm |
センサーの高さ |
104 mm |
環境条件
保護等級 |
IP66 IP67 |
Ambient temperature |
-30 ... +80 °C |
Storage and transport temperature |
-40 ... +85 °C |
Permissible installation altitude above sea level, maximum |
2,000 m |
環境条件 - 絶縁値
定格絶縁電圧 |
24 VDC |
定格インパルス耐電圧 |
0.8 kV |
Overvoltage category |
III |
IEC/EN 60664-1に準拠した汚染度 |
3 |
電気的データ
熱試験電流 |
2 A |
EN 60947-5-1 に基づく要求定格短絡電流 |
400 A |
スイッチ素子 |
1 NO 接点, 2 NC 接点 |
Note (Switching element) |
Change-over contact with double break, type Zb or 3 NC contacts, with galvanically separated contact bridges |
スイッチ原理 |
slow action, positive break NC contact |
開閉頻度 |
1,200 /h |
接点材質、電気的 |
銀 |
Electrical data - Safety contacts
Voltage, Utilisation category AC-15 |
50 VAC |
Current, Utilisation category AC-15 |
2 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
2 A |
Electrical data - Auxiliary contacts
Voltage, Utilisation category AC-15 |
50 VAC |
Current, Utilisation category AC-15 |
2 A |
Voltage, Utilisation category DC-13 |
24 VDC |
Current, Utilisation category DC-13 |
2 A |
その他のデータ
注意 (アプリケーション) |
スライド式ガード 取り外し可能なガード ヒンジ式ガード |
納入品目
納入時同梱 |
Actuator must be ordered separately. Slot cover for dust-proof covering of the opening not in use |
言語フィルター
データシート
Operating instructions and Declaration of conformity
CCC certification
Adobe Readerの最新版をダウンロードしてください
Product picture (catalogue individual photo)
Dimensional drawing basic component
Dimensional drawing basic component
Diagram
Detail photo
Contact arrangement
EU Declaration of Conformity |
Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
Name of the component: | AZ215 AZ216 AZ315 AZ316 |
Type: | See ordering code |
Description of the component: | Positive break position switch with separate actuator for safety functions |
Relevant Directives: | Machinery Directive | 2006/42/EC |
RoHS-Directive | 2011/65/EU |
Applied standards: | EN 60947-5-1:2017 + AC:2020 |
Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
Place and date of issue: | Wuppertal, August 4, 2023 |
Authorised signature Philip Schmersal Managing Director |
シュメアザー株式会社, 〒222-0033 横浜市港北区新横浜3-9-5, 新横浜第3東昇ビル
データと詳細は完全にチェックされました。画像は元の画像と異なる場合があります。技術的なデータはマニュアルで見られます。技術的に変更されたり、エラーの可能性があります。
Generated on 2024/10/08 20:06