.png?id=e5ef4d56dad486103335c34b5b46f1ce){kind=logo}
EDRR40RT/2x303/GB
Item number:
103008214
EDRR40RT/2x303/GB
Item number:
103008214
Downloads
TraceParts
CAD Data
ePLAN
Data
CADENAS
CAD Data
SISTEMA
Data
| Product type description: EDR(1)(2)(3)(4) |
| (1) | |
| R | Latching (only in conjunction with EFR); unlocking by turning and pulling |
| RZ | Latching (only in conjunction with EFR); unlocking by pulling |
| Z | Latching (integrated in the device head); unlocking by pulling |
| RS | with lock, unlocking only with key and pulling, (EFR required) |
| (2) | |
| 40 | Head diameter 38,5 mm |
| 50 | Head diameter 49 mm |
| (3) | |
| Mounting hole 22,3 mm | |
| VH | Mounting hole 30,5 mm |
| (4) | |
| RT | Control element red |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
Ordering data
| Product type description |
EDRR40RT/2x303/GB |
| Article number (order number) |
103008214 |
| EAN (European Article Number) |
4030661452838 |
| eCl@ss number, version 12.0 |
27-37-12-12 |
| eCl@ss number, version 11.0 |
27-37-12-12 |
| eCl@ss number, version 9.0 |
27-37-12-12 |
| ETIM number, version 7.0 |
EC001038 |
| ETIM number, version 6.0 |
EC001038 |
Approvals - Standards
| Certificates |
cULus CCC |
General data
| Standards |
EN ISO 13850 EN IEC 60947-5-1 EN IEC 60947-1 |
| Versions |
Pushbutton |
| Design |
Round |
| Material of the operators |
Aluminium |
| Colour of the operating element |
Red |
| Gross weight |
80 g |
General data - Features
| Safety functions |
Yes |
| Latching |
Yes |
| Fully insulated |
Yes |
| Number of normally closed (NC) |
2 |
| Number of normally open (NO) |
2 |
Mechanical data
| Unlocking |
roatation draw unlocking |
| Mechanical life, minimum |
100,000 Operations |
| Actuating stroke |
5 mm |
| Positive break travel |
2 mm |
| Contact opening |
3 mm NO |
| Mounting |
Mounting flange ELM |
| Tightening torque of the screw |
0.6 Nm |
| Mounting flange position |
1 3 |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, minimum |
0.5 mm², rigid 0.5 mm², flexible |
| Cable section, maximum |
2.5 mm², rigid 1.5 mm², flexible |
| Note |
All indications including the conductor ferrules. |
Mechanical data - Dimensions
| Length |
46 mm |
| Height |
29 mm |
| Depth |
65 mm |
| Diameter of cap |
38.5 mm |
| Mounting diameter |
22.3 mm |
| Thickness, of the front panel, minimum |
1.5 mm |
| Thickness of the front panel, maximum |
6 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Degree of protection of the switch rooms |
IP40 |
| Degree of protection of clips or terminals |
IP20 |
| Ambient temperature |
-25 ... +80 °C |
| Restistance to shock |
70 g / 4 ms |
| Resistant to vibration |
Resistance to vibration: 20 g / 10…200 Hz |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
400 V |
Electrical data
| Thermal test current |
10 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
8 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
5 A |
| Switching element |
NC contact, NO contact |
| Switching principle |
Slow action |
| Bounce duration, maximum |
5 ms |
| Maximum switching frequency |
600 /h |
| Contact labelling |
11-12 23-24 |
Scope of delivery
| Note (scope of delivery, number and type) |
Mounting flange ELM is included in delivery |
Product picture (catalogue individual photo)
| EU-Konformitätserklärung |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Erklärung: | Hiermit erklären wir, dass die nachfolgend aufgeführten Bauteile aufgrund der Konzipierung und Bauart den Anforderungen der unten angeführten Europäischen Richtlinien entsprechen. |
| Bezeichnung des Bauteils: | EDRR..., EDRRZ..., EDRZ... |
| Typ: | siehe Typenschlüssel |
| Beschreibung des Bauteils: | Not-Halt-Schlagtaster |
| Einschlägige Richtlinien: | Maschinenrichtlinie | 2006/42/EG |
| RoHS-Richtlinie | 2011/65/EU |
| Angewandte Normen: | EN 60947-5-1:2017 + AC:2020 EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 EN ISO 13850:2015 |
| Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Ort und Datum der Ausstellung: | Wuppertal, 9. Februar 2023 |
 |
| Rechtsverbindliche Unterschrift Philip Schmersal Geschäftsführer |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | EDRR..., EDRRZ..., EDRZ... |
| Type: | See ordering code |
| Description of the component: | Emergency stop pushbutton |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 + AC:2020 EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 EN ISO 13850:2015 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, November 18, 2022 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 5/19/2024, 4:26 PM