.png?id=e5ef4d56dad486103335c34b5b46f1ce){kind=logo}
IFL 8-18L-10TP-2130
IFL 8-18L-10TP-2130
Downloads
| Product type description: IFL (1)-(2)(3)-(4)(5)(6)(7)-(8) |
| (1) | |
| 55 | Switching distance 5 mm |
| 8 | Switching distance 8 mm |
| 10 | Switching distance 10 mm |
| (2) | |
| 18 | Cylinder, thread M18, metal |
| 180 | Cylinder, thread M18, plastic |
| (3) | |
| without | Standard body |
| M | Miniature body |
| L | Long design |
| (4) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (5) | |
| without | Cable |
| ST | Male connector |
| T | Conductor with strain relief |
| A | Alternating current/direct current AC/DC |
| D | DC 2-wire |
| (6) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (7) | |
| N | n-type |
| P | p-type |
| (8) | |
| 2033 | Stainless steel enclosure |
| 2130 | Can be used up to +130 C, without LED switching conditions display |
- Metal enclosure
- DC 3-wire
- Long design
- Max. + 130 °C
- Design M 18 x 1
Ordering data
| Product type description |
IFL 8-18L-10TP-2130 |
| Article number (order number) |
101123655 |
| EAN (European Article Number) |
4030661050300 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
Approvals - Standards
| Certificates |
CCC |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Brass |
| Housing coating material |
nickel-plated |
| Active area |
Plastic |
| Material of the terminal fixing |
Thermoplastic |
| Gross weight |
125 g |
General data - Features
| Integral system diagnostics, status |
No |
| Cable sleeve |
Yes |
| Number of cable wires |
3 |
Mechanical data
| Tightening torque of nuts, maximum |
18 Nm |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Nominal switching distance Sn |
8 mm |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
Cable |
| Wire cross-section |
0.34 mm2 |
| Material of the Cable mantle |
Thermoflex 155 |
Mechanical data - Dimensions
| ISO thread of the sensor |
M18 |
| width across flats |
24 BK |
| Length of sensor |
91 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +130 °C |
| Protection class |
0 |
Electrical data
| Type of voltage range |
DC |
| No-load supply current I0, typical |
1.8 mA |
| Rated operating voltage |
10 ... 30 VDC |
| Operating current |
200 mA |
| Switching element |
Normally open contact (NO) |
| Protection circuit integrated |
inductive interference protection Protection against polarity reversal |
| Switching frequency, approx. |
350 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
1.2 V |
| Current at Voltage drop Ud |
0.2 A |
| Design of control elements |
p-type |
Status indication
| Note (Integral System Diagnostics, status ) |
without |
Scope of delivery
| Note (scope of delivery, number and type) |
Clamp H 18 is included in delivery |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
EC Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
101068879 ACC-IFL-MOCL-H18
- For a smooth fitting of the proximity switches with cylindric shape Ø 18 mm or thread M18
Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 5/12/2024, 10:49 AM