.png?id=e5ef4d56dad486103335c34b5b46f1ce){kind=logo}
MSP 452-11/11Y-M20
MSP 452-11/11Y-M20
Downloads
- 2 cable entries
- Metal enclosure
- 4 Contacts
- 118 mm x 174 mm x 64 mm
Ordering data
| Product type description |
MSP 452-11/11Y-M20 |
| Article number (order number) |
101160615 |
| EAN (European Article Number) |
4030661190815 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
|
CCC |
General data
| Standards |
EN IEC 60947-5-1 |
| Working principle |
mechanical |
| Housing material |
Grey cast iron, galvanised |
| Housing coating material |
painted |
| Gross weight |
1,735 g |
General data - Features
| Number of normally closed (NC) |
2 |
| Number of normally open (NO) |
2 |
Mechanical data
| Mechanical life, minimum |
3,000,000 Operations |
| Contact opening |
2 x 0.5 mm |
| Actuating torque |
0.2 Nm |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, minimum |
1.5 mm² |
| Cable section, maximum |
2.5 mm² |
| Note |
All indications including the conductor ferrules. |
| Wire cross-section |
12 AWG |
Mechanical data - Dimensions
| Length of sensor |
64 mm |
| Width of sensor |
118 mm |
| Height of sensor |
174 mm |
| Diameter of the Plunger |
10 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-30 ... +90 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
2.5 A |
| Switching element |
NO contact / NC contact |
| Switching principle |
Snap action |
| Bounce duration, maximum |
43,221 ms |
| Switchover time, maximum |
10 ms |
Note
| Note (General) |
This rotating spindle limit switch with snap-action insert is only fit for use in normal to average operating conditions, e.g. for machine tools, cranes and conveyors. Protection class IP 65 to IEC/EN 60529. By reversing the contacts, the spindle revolutions can be set between 4 and 55 revolutions The run-out towards each side is at least 5 revolutions. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angleSchmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 11/21/2024, 1:27 PM