BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU

Item number: 101215387

BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU

Item number: 101215387

Downloads

TraceParts CAD Data

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Amount

Product type description:

BDF 200-(1)-AS-(2)-(3)-(4)-(5)-(6)

(1)
ST1	Connector plug M12 - plastic - bottom
ST2	Connector plug M12, above

(2)
NH	Emergency stop pushbutton without protective collar
NHK	Emergency stop with protective collar

(3)
WS 2/3	Selector switch, 2/3 switch position
WT 2/3	Selector switch, 2/3 switch positions
SW 20	Key switch/button, 2 switch positions
LT..	Illuminated control push button (selection colour)
LM..	Indicator light (selection colour)
DT..	Push button (Selection Color)

(4)
LT..	Illuminated control push button (selection colour)
LM..	Indicator light (selection colour)
DT..	Push button (Selection Color)

(5)
LT..	Illuminated control push button (selection colour)
LM..	Indicator light (selection colour)
DT..	Push button (Selection Color)

(6)
without	without indicator lamp G24
G24	with indicator lamp G24

Not all component variants, which are possible according to this order code are available and/or technically feasible.

Pos 1: E-STOP with protective collar
Pos 2: RED signal light
Pos 3: WHITE illuminated pushbutton
Pos 4: BLUE illuminated pushbutton
Integrated AS-Interface
with connector plug M12 bottom
slender shock-proof thermoplastic enclosure
to be installed at an ergonomic favourable position
to be fitted to commercial-off-the-shelf aluminium profiles

Ordering data

Product type description	BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU
Article number (order number)	101215387
EAN (European Article Number)	4030661448459
eCl@ss number, version 12.0	27-37-12-16
eCl@ss number, version 11.0	27-37-12-16
eCl@ss number, version 9.0	27-37-12-16
ETIM number, version 7.0	EC000225
ETIM number, version 6.0	EC000225
Note (Ordering data)	Notice: see ordering code

Approvals - Standards

Certificates

cULus

ASi-SaW

General data

Standards	EN IEC 62026-2 EN ISO 13849-1 EN ISO 13850 EN IEC 60947-5-1 EN IEC 61508
Climatic stress	DIN EN 60068
Housing material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Reaction time, maximum	100 ms
Positions used, position 1	Emergency stop, with protective collar
Positions used, position 2	Illuminated signal, red
Positions used, position 3	Illuminated pushbutton, white
Positions used, position 4	Illuminated pushbutton, blue
Gross weight	280 g

General data - Features

Indicator lamp	No

Safety classification

Standards	EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	1.40 x 10⁻⁸ /h
Note (PFH-value)	up to max. 5,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Mechanical life, Emergency-Stop button	100,000 Operations
Mechanical life, Command devices	1,000,000 Operations
Mounting	interior mounting holes
Type of the fixing screws	2x M5

Mechanical data - Connection technique

Termination	Connector plug M12, 4-pole, (A-coding)

Mechanical data - Dimensions

Width	40 mm
Height	69 mm
Depth	233.5 mm

Ambient conditions

Degree of protection	IP65
Ambient temperature	-25 ... +65 °C
Storage and transport temperature	-25 ... +85 °C
Resistance to vibrations	10 … 150 Hz, amplitude 0.35 mm / 5 g
Restistance to shock	15 g / 11 ms
Protection class	II
Permissible installation altitude above sea level, maximum	2,000 m

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data - AS Interface

Rated operating voltage	18 ... 31.6 VDC (Protection against polarity reversal)
AS-i Current consumption, maximum	150 mA

Electrical data - AS-Interface specification

Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) FID: periphery error
AS-i Version (Safety-Slave)	V 3.0
AS-i Profile (Safety-Slave)	S-7.B.F.F
AS-i Input, Channel 1 (Safety-Slave)	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2 (Safety-Slave)	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Output, DO 0 (Safety-Slave)	Indicator lamp G24 red
AS-i Output, DO 1 (Safety-Slave)	Indicator lamp G24 green
AS-i Output, DO 2 (Safety-Slave)	No Function
AS-i Output, DO 3 (Safety-Slave)	No Function
AS-i AS-i Parameter bits (Safety-Slave), P0 ... P3	No function
AS-i Version (A/B Slave)	V 3.0
AS-i Profile (A/B Slave)	S-7.A.7.F
AS-i Input, DI 0 (A/B Slave)	Command device Position 4
AS-i Input, DI 1 (A/B Slave)	Command device Position 3
AS-i Input, DI 2 (A/B Slave)	Command device Position 2
AS-i Input, DI 3 (A/B Slave)	Command device Position 2
AS-i Output, DO 0 (A/B Slave)	Illuminated signal position 4
AS-i Output, DO 2 (A/B Slave)	Illuminated signal position 2
AS-i Output, DO 1 (A/B Slave)	Illuminated signal position 3
AS-i Output, DO 3 (A/B Slave)	No Function
AS-i AS-i Parameter bits (A/B Slave), P0 ... P3	No function
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Note	Both AS-i slaves can be enabled and disabled through the integrated DIP switch. The addressing must take place via the M12 connector.

Pin assignment

PIN 1	AS-Interface +
PIN 2	n.c.
PIN 3	AS-Interface -
PIN 4	n.c.

Product picture (catalogue individual photo)

ID: kbdf2f03

| 1.5 MB | .jpg | 352.778 x 802.217 mm - 1000 x 2274 px - 72 dpi

| 26.1 kB | .png | 22.013 x 50.038 mm - 260 x 591 px - 300 dpi

| 125.1 kB | .png | 74.083 x 168.275 mm - 210 x 477 px - 72 dpi

| 49.5 kB | .jpg | 54.328 x 123.472 mm - 154 x 350 px - 72 dpi

Dimensional drawing basic component

ID: 1bdf2g03

| 358.0 kB | .cdr |

| 14.8 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 164.7 kB | .jpg | 352.778 x 245.181 mm - 1000 x 695 px - 72 dpi

Operating principle

ID: kbdf-a08

| 284.5 kB | .jpg | 352.778 x 281.517 mm - 1000 x 798 px - 72 dpi

| 5.0 kB | .png | 74.083 x 59.267 mm - 210 x 168 px - 72 dpi

Clipart

ID: kbdf-c03

| 64.1 kB | .cdr |

| 7.7 kB | .png | 74.083 x 404.989 mm - 210 x 1148 px - 72 dpi

Contact arrangement

ID: km12-k4c

| 4.2 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi

| 113.3 kB | .jpg | 352.778 x 352.778 mm - 1000 x 1000 px - 72 dpi

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

BDF200AS

Type:

See ordering code

Description of the component:

Control panel with or without safety function and integrated AS interface

Relevant Directives:	Machinery Directive ¹⁾	2006/42/EC
	Low Voltage Directive	2014/35/EU
	EMC-Directive	2014/30/EU
	RoHS-Directive	2011/65/EU
	¹⁾ For device versions with safety function

Applied standards:

EN 60947-5-1:2017 + AC:2020
¹⁾ EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017
¹⁾ EN ISO 13849-1:2023
¹⁾ EN 61508-1:2010

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, December 10, 2024

Authorised signature
Philip Schmersal
Managing Director

Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 12/30/2024, 11:35 AM

Cart

Login Register now

BDF200-ST1-AS-NHK-LMRD-LTWH-LTBU