.png?id=e5ef4d56dad486103335c34b5b46f1ce){kind=logo}
BNS 36-11/01Z-ST-L
Item number:
101193236
BNS 36-11/01Z-ST-L
Item number:
101193236
| Product type description: BNS 36-(1)(2)Z(3)-(4)-(5) |
| (1) | |
| 11 | 1 NO contact/1 NC contact |
| 02 | 2 NC contact |
| (2) | |
| without | with diagnostic output |
| /01 | 1 NC contact |
| 10 | 1 NO contact |
| (3) | |
| without | without LED switching conditions display |
| G | with LED switching conditions display |
| (4) | |
| without | Pre-wired cable |
| ST | with connector |
| (5) | |
| L | Door hinge on left-hand side |
| R | Door hinge on right-hand side |
| (6) | |
| 2750 | Version with extended switching distance (in combination with actuator) BPS 36-1-2750 or BPS 36-2-2750) |
Not all component variants, which are possible according to this order code are available and/or technically feasible.
- Connector 8 mm, 6-pole, Latching interlocking
- Thermoplastic enclosure
- Long life
- no mechanical wear
- 88 mm x 25 mm x 13 mm
- Concealed mounting possible
- Insensitive to transverse misalignment
- Insensitive to soiling
Ordering data
| Product type description |
BNS 36-11/01Z-ST-L |
| Article number (order number) |
101193236 |
| EAN (European Article Number) |
4030661359922 |
| eCl@ss number, version 12.0 |
27-27-44-01 |
| eCl@ss number, version 11.0 |
27-27-24-02 |
| eCl@ss number, version 9.0 |
27-27-24-02 |
| ETIM number, version 7.0 |
EC002544 |
| ETIM number, version 6.0 |
EC002544 |
Approvals - Standards
|
cULus |
General data
| Standards |
BG-GS-ET-14 EN IEC 60947-5-3 |
| Coding level according to EN ISO 14119 |
Low |
| Working principle |
Magnetic drive |
| Installation conditions (mechanical) |
quasi-flush |
| Housing material |
Glass-fibre, reinforced thermoplastic |
| Gross weight |
29 g |
General data - Features
| Coding |
Yes |
| Number of normally closed (NC) |
2 |
| Number of safety contacts |
2 |
| Safety classification |
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D- Value Normally-closed contact/Normally open contact (NC/NO) |
25,000,000 Operations |
Mechanical data
| Actuating element |
Magnet |
| Door hinge |
Left |
| Direction of motion |
Head-on to the active surface |
Mechanical data - Switching distances according EN IEC 60947-5-3
| Note (Switching distance Sn) |
Axial misalignment, a horizontal and vertical misalignment of the safety sensor and the actuator are tolerated. The possible misalignment depends on the distance of the active surfaces of the sensor and the actuator. The sensor remains active within the tolerance range. |
| Assured switching distance "ON" Sao |
7 mm |
| Assured switching distance "OFF" Sar |
17 mm |
Mechanical data - Connection technique
| Termination |
Connector 8 mm, 6-pole, Latching interlocking |
Mechanical data - Dimensions
| Length of sensor |
13 mm |
| Width of sensor |
88 mm |
| Height of sensor |
25 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Storage and transport temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
Electrical data
| Switching voltage, maximum |
30 VDC |
| Switching current, maximum |
0.4 A |
| Switching capacity, maximum |
10 W |
| Switching element |
1 NO contact, 2 NC contacts |
| Switching frequency, maximum |
5 Hz |
Scope of delivery
| Scope of delivery |
Actuator must be ordered separately. |
Accessory
| Recommendation (actuator) |
BPS 36-2 |
| Recommended safety switchgear |
SRB-E-301ST SRB-E-201LC |
Note
| Note (General) |
The number in brackets indicate the PIN number of the connector. |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
Dimensional drawing basic component
Diagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
Characteristic curve
Characteristic curve
Operating principle
Connector
101206010 A-K6P-M8-R-G-2M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101206011 A-K6P-M8-R-G-5M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101206012 A-K6P-M8-R-G-10M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
101206013 A-K6P-M8-R-W-2M-GY-1-X-A-4
- M8, round 8 mm
- Pre-wired cable
- 6-pole
- Latching interlocking
101206014 A-K6P-M8-R-W-5M-GY-1-X-A-4
- M8, round 8 mm
- Pre-wired cable
- 6-pole
- Latching interlocking
101206015 A-K6P-M8-R-W-10M-GY-1-X-A-4
- Pre-wired cable
- 6-pole
- Latching interlocking
103011345 A-K4P-M8-R-W-5M-GY-1-X-X-4
- Pre-wired cable
- 4-pole
103011344 A-K4P-M8-R-W-2M-GY-1-X-X-4
- Pre-wired cable
- 4-pole
103011346 A-K4P-M8-R-W-10M-GY-1-X-X-4
- Pre-wired cable
- 4-pole
103011342 A-K4P-M8-R-G-5M-GY-1-X-X-4
- Pre-wired cable
- 4-pole
103011341 A-K4P-M8-R-G-2M-GY-1-X-X-4
- Pre-wired cable
- 4-pole
103011343 A-K4P-M8-R-G-10M-GY-1-X-X-4
- Pre-wired cable
- 4-pole
Accessories
101188624 SPACER BNS 36 SPACER
- to mount the magnetic safety sensor and actuator on ferromagnetic material
Actuator
101190052 BPS 36-1
- Actuator and sensor on a mounting level
101191859 BPS 36-2
- Actuator 90 ° attached to the sensor
Control-Modul
103009970 SRB-E-201LC
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 2 Safety outputs 2 A
- 1 Signalling output
103009973 SRB-E-204ST
- Plug-in screw terminals with coding
- STOP 0 Function
- Monitoring of 4 sensors
- Start button / Auto-start
- 2 Safety outputs
- 4 Signalling outputs
103007672 SRB-E-301ST
- Plug-in screw terminals with coding
- STOP 0 Function
- 1 oder 2-channel control
- Start button / Auto-start
- 1 Auxiliary contact
- 3 safety contacts
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | BNS 36 |
| Type: | See ordering code |
| Description of the component: | Coded safety-sensor with magnetic operating principle in combination with the SRB(-E) / PROTECT-SELECT / PSC1 safety-monitoring modules from Schmersal or an equivalent safety-oriented control system fulfilling the requirements of the EN 60947-5-3. |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-3:2013 EN ISO 14119:2013 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Ort und Datum der Ausstellung: | Wuppertal, November 16, 2022 |
 |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | BNS 36 |
| Type: | See ordering code |
| Description of the component: | Coded safety-sensor with magnetic operating principle in combination with the SRB(-E) / PROTECT-SELECT / PSC1 safety-monitoring modules from Schmersal or an equivalent safety-oriented control system fulfilling the requirements of the EN 60947-5-3. |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-3:2013 EN ISO 14119:2013 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, November 16, 2022 |
|
| Authorised signature Philip Schmersal Managing Director |
Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated on: 12/30/2024, 1:09 PM