schmersal_s_icon.png

BDF200-NH-11-SWS20S1-LT-LT-2875/2920

Item number: 103037195
BDF200-NH-11-SWS20S1-LT-LT-2875/2920

Downloads

TraceParts CAD Data
ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:

BDF 200-(1)-(2)-(3)-(4)-(5)-(6)


(1)
NHEmergency stop pushbutton without protective collar
NHKEmergency stop with protective collar
LT..Selection (Color Illuminated pushbutton)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)
PT..Mushroom push button

(2)
20with EMERGENCY-STOP: 2 NO position 2-4 > without EMERGENCY STOP: 2 NO position 1-4
11with EMERGENCY-STOP: 1 NO/1 NC position 2-4 > without EMERGENCY STOP: 1 NO/1 NC position 1-4
10with EMERGENCY-STOP: 1 NO position 2-4 > without EMERGENCY STOP: 1 NO position 1-4

(3)
WS 2/3Selector switch, 2/3 switch position
WT 2/3Selector switch, 2/3 switch positions
SW 20Key switch/button, 2 switch positions
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)
PT..Mushroom push button

(4)
WS 2/3Selector switch, 2/3 switch position
WT 2/3Selector switch, 2/3 switch positions
SW 20Key switch/button, 2 switch positions
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)
PT..Mushroom push button

(5)
LT..Illuminated control push button (selection colour)
LM..Indicator light (selection colour)
DT..Push button (Selection Color)
PT..Mushroom push button

(6)
withoutwithout indicator lamp
G24with indicator lamp, red (only for -10)

(7)
withoutIncluded in standard version
2875Freely installable button caps
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • slender shock-proof thermoplastic enclosure
  • to be installed at an ergonomic favourable position
  • to be fitted to commercial-off-the-shelf aluminium profiles
  • Thermoplastic enclosure
  • slender shock-proof enclosure
  • large range of Illuminated pushbuttons, Selector switches, LED indicator lights, Key-operated selector switches and Emergency-Stop buttons
  • Emergency stop, on/off and reset functions available
  • The position of the pushbuttons on the control panel can be freely selected.
  • Field labelling with separate plastic cover
  • Freely installable button caps for an optimal adaptation to the plants

Ordering data

Product type description

BDF200-NH-11-SWS20S1-LT-LT-2875/2920
Article number (order number)

103037195
EAN (European Article Number)

4030661542270
eCl@ss number, version 12.0

27-37-12-16
eCl@ss number, version 11.0

27-37-12-16
eCl@ss number, version 9.0

27-37-12-16
ETIM number, version 7.0

EC000225
ETIM number, version 6.0

EC000225
Note (Ordering data)

Notice: see ordering code

Approvals - Standards

Certificates

cULus

General data

Standards

EN ISO 13850

EN IEC 60947-5-1

EN IEC 60947-5-5

EN IEC 60947-1
Climatic stress

IEC 60068-2-30
Versions

Assembly housing
Housing material

Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Positions used, position 1

Emergency stop pushbutton
Positions used, position 2

Key selector switch 2 positions

Positions used, position 3

Illuminated pushbutton; color exchangeable
Positions used, position 4

Illuminated pushbutton, color exchangeable
Gross weight

280 g

General data - Features

Emergency-Stop button

Yes
Safety functions

Yes
Removable Terminals

Yes
Number of cable wires

12

Safety classification

Standards

EN ISO 13849-1
Mission time

20 Year(s)

Safety classification - Safety outputs

B10D Normally-closed contact (NC)

100,000 Operations

Mechanical data

Position of the cable gland

bottom
Mechanical life, Emergency-Stop button

100,000 Operations
Mechanical life, Command devices

1,000,000 Operations
Mechanical life, Key operated- selector switch

30,000 Operations
Actuating stroke

3 mm
Actuating force, maximum

8 N
Note (Actuating force)

each contact
Contact force, typically

1 N
Mounting

interior mounting holes
Type of the fixing screws

2x M5
Tightening torque of the fastening screws for the housing cover, minimum

0.7 Nm
Tightening torque of the fastening screws for the housing cover, maximum

0.8 Nm

Mechanical data - Connection technique

Cable entry

M12 (A-coding)
Termination

Connector M12, 12-pole
Wire cross-section

0.5 mm2
Tightening torque of electrical connection, maximum

1.2 Nm
Terminal (mechanical)

Removable screw terminals

Mechanical data - Dimensions

Width

40 mm
Height

69 mm
Depth

233.5 mm

Ambient conditions

Degree of protection

IP65
Ambient temperature

-25 ... +65 °C
Resistance to vibrations

10 … 100 Hz, with 20 g
Restistance to shock

100 g / 6 ms

Ambient conditions - Insulation values

Rated insulation voltage Ui

250 VAC

30 V
Rated impulse withstand voltage Uimp

0.8 kV
Overvoltage category

II
Overvoltage category

III
Degree of pollution

3

Electrical data

Thermal test current

2 A

2.5 A
LED current consumption (operating elements)

16 mA
Rated operating voltage

24 VDC
Utilisation category AC-15

24 VAC
Utilisation category AC-15

1.5 A
Utilisation category DC-13

24 VDC
Utilisation category DC-13

1 A
External wire and device fuse rating

2.5A T
Suitable for low-voltages

≥ 5 V / ≥ 1 mA
Switching principle

Slow action

cross-point-system
Maximum switching frequency

1,200 /h
Material of the contacts, electrical

Ag-Ni 10, gold-plated
Electrical fuse rating, maximum

1.5 A

Status indication

Colour of the indicator lamp

without (Blanking plug, black)

Other data

Note (applications)

Suitable for 40 mm profiles
EU Declaration of Conformity LOG_COM_lo1de01s
Original



K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Declaration:We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.
Name of the component:BDF200
Type:See ordering code
Description of the component:Control panel
Relevant Directives:Machinery Directive 1)2006/42/EC
 RoHS-Directive2011/65/EU
Affixing of the CE conformity mark:1) for safety components, whose type plate is labelled "safety component" for device versions with emergency-stop function
Applied standards:EN 60947-5-1:2017
EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017
EN ISO 13850:2015
Person authorised for the compilation of the technical documentation:Oliver Wacker
Möddinghofe 30
42279 Wuppertal
Place and date of issue:Wuppertal, May 5, 2020
GRA_SIG_ksig-y24
 Authorised signature
Philip Schmersal
Managing Director
UK Declaration of Conformity LOG_COM_lo1de01s
Company:K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com
Declaration:We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.
Name of the component:BDF200
Type:See ordering code
Description of the component:Control panel
Relevant legislation:Supply of Machinery (Safety) Regulations 1)2008
 The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations2012
  
 1) for safety components, whose type plate is labelled "safety component" for device versions with emergency-stop function
Designated standards:EN 60947-5-1:2017 + AC:2020
EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1)
EN ISO 13850:2015
UK-Importer /
Person authorised for the compilation of the technical documentation:


Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL
Place and date of issue:Wuppertal, November 18, 2022
 GRA_SIG_ksig-y24
 Authorised signature
Philip Schmersal
Managing Director

Schmersal, Inc., 115 E Stevens Ave, Suite 208, Valhalla, NY 10595

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated on: 11/18/2024, 7:41 PM